Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.
[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.
Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though there's a hash at
https://www.python.org/downloads/release/python-279/ prefer using the
sig since that's just md5.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes BR2_PACKAGE_PYTHON_PYEXPAT description and
help text to underline that all the xml libraries will be
included in python.
It also reorders alphabetically the affected option.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have a configure option in Python to enable/disable the
ossaudiodev module, this commit adds a configuration option to the
target Python to explicitly enable/disable this module.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module is not needed to build the target Python, and can cause
some build issues on certain systems (when <linux/soundcard.h> does
not contain the OSS related definitions).
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module causes some build failures in certain setups and is not
very useful.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that we don't use completely sequential numbers, because patches
below 100 are used to address cross-compilation issues in Python,
while patches above 100 are used to make more Python modules
configurable.
[Thomas: fixup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In addition to doing the bump, this commit also:
- Refreshes all the patches
- Removes python-003-properly-detect-if-python-build.patch, which has
been applied upstream.
- Passes the --without-ensurepip option, like is done in Python 3, to
avoid having Python use PIP to automatically download stuff when it
is being built.
- PYTHON_LIBTOOL_PATH = NO is added to prevent Buildroot from trying
to patch a version of libtool for which we don't have matching
patches, which isn't a problem since we're anyway not using the
part of the Python sources that uses libtool (it's the built-in
copy of libffi, and we use the external libffi).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the removal of py/pyc files is Python-specific, this commit
moves the logic removing those files to python.mk and python3.mk
respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_scripts() method in distutils copies the scripts listed
in the setup file and adjusts the first line to refer to the
current Python interpreter. When cross-compiling, this means that
the adjusted shebang refers to the host Python interpreter.
As a consequence, we add a patch for python and python3 that
force copy_scripts() to preserve the shebang when
cross-compilation is detected.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libffi depends on pthreads.
Python depends on libffi (it can provide a builtin libffi, but also depends on
pthreads). Thus this patch also disable Python support if toolchain is compiled
w/o treads support.
Fixes http://sysmic.org/~jezz/results/204099dd:
../src/closures.c:119:21: fatal error: pthread.h: No such file or directory
[Peter: fix comment dependencies, add python3]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Advance the serial number of a patch from 015 to 016 to avoid collision and
confusion.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The xtensa ioctls.h header references struct serial_multiport_struct that is
not defined in this header or included headers. ioctls.h also references
tty_struct that is not exported to userspace at all. Add a patch fixing these
issues.
This is only a workaround as the real problem should be fixed in the kernel
(by removing all struct references like all other archs). But since we support
older kernel versions we'll have to carry this patch for some time.
Fixes:
http://autobuild.buildroot.net/results/12b/12b5612828d7f1fc7d1f69fc01341d5a6e628db5/
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds support for time.tzset() in Python 2.7 and Python 3.
The Python configure script sets ac_cv_working_tzset to 'no' when
cross compiling, although it should be available and work with all
toolchains supported by Buildroot (?).
The patch below pre-sets the variable so that time.tzset() works.
[Thomas: adjust commit log.]
Signed-off-by: Henry Margies <henry.margies@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The different patches are just refreshed to apply without fuzz, there
are no changes/conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
IDLE is the Python IDE built with the tkinter GUI toolkit, for which
the main script has always been removed from the target (so it was
never usable in Buildroot). However, we were still installing about
800 to 900 KB of .pyc files used only by the idle editor. This commit
adds a Python patch that completely gets rid of the
compilation/installation of the idle editor. As a consequence, it is
no longer needed to manually remove the 'idle' program from the
target in python.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Status of patches:
- python-013-fix-readline-6.3.patch is removed, as it was a backport
from an upstream fix.
- all other patches are updated, with no special changes other than
solving minor conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using this minimal defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_BERKELEYDB=y
the current code does not prevent the build of
output/build/python-2.7.6/Modules/_bsddb.o
because the module is really called _bsddb,
see python-2.7.6/Modules/_bsddb.c, line 9604.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cross-compilation improvements integrated in Python rely on the
compiler exposing a line starting with LIBRARY_PATH when called with
-E -v. This is used by Python setup.py to find the installation
locations of libraries.
However, this LIBRARY_PATH line is not shown by very old compilers,
such as the gcc 4.2.x compiler used on the AVR32 architecture. This
causes libraries installed in the sysroot, such as libffi, to not be
detected by the setup.py script.
To fix this problem, this patch adds addtional logic to setup.py,
which consists in deriving the library paths from the sysroot
location, if no LIBRARY_PATH field was found.
Fixes:
http://autobuild.buildroot.org/results/1aa/1aad2d677dbf7b0a3cb0120a35f45123124f51ab/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When no python interpreter is selected, all host-python symlink
installation were disabled.
This could lead to a non-existing $(HOST_DIR)/usr/bin/python program.
Fixes:
http://autobuild.buildroot.net/results/6e7/6e74a343b4e8e113fd34d45c9279419e233afe8a/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds a patch to python disabling the installation of the
python and python-config symlinks.
This allows Buildroot to control these symlinks' installation:
* the python symlink should be unconditionally installed in the target
tree, and the python-config symlink in the staging tree, since it is
only built and installed in the target tree if the user selected it;
* the python and python-config symlinks should only be installed in
the host tree when python(2) is the selection of the user for the
target.
Otherwise, when python3 is selected for the target, the host-python
may be required to built some packages. In such cases, the python
symlink should points to python3 (so should the python-config
symlink) to reflect the staging/target tree.
[Thomas: fix comments according to Yann's suggestions, and replaced
python(2) by python2, as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During installation, host-python and host-python3 run the freshly built
python executable. This is done with a proper LD_LIBRARY_PATH to make
sure it picks up the libpython in the build directory. However, the
python binary has an RPATH pointing to the $(HOST_DIR)/usr/lib.
Therefore, if libpython exists there, it will be used instead.
If the install step is run in parallel, it is possible that libpython
is already partially copied to $(HOST_DIR)/usr/lib when python is run.
This gives an error like:
python: error while loading shared libraries: $(HOST_DIR)/usr/lib/libpython3.4m.so.1.0: file too short
The fix is simple: use RUNPATH instead of RPATH, which allows
LD_LIBRARY_PATH to override RUNPATH. That way, the libpython in the
build directory is always used. RUNPATH is enabled by passing
--enable-new-dtags to the linker.
Fixes e.g.
http://autobuild.buildroot.net/results/2a6/2a62de3247ba5ad273f03d01e690a3eeb11aa7b4
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original version uses sysconfig from the python interpreter
(normally host-python) which isn't really suited to provide information
of the target python.
Use the pure shell preprocessed backport from the upcoming python 3.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A confusion was made when applying commit
c3d539b53f ('host python/python3:
conditionally disable unicodedata') and then commit
73293e88c8 ('python, python3: enable
unicodedata for host-python, needed by setuptools').
The first commit added the enabling of unicodedata in the host Python
when the target Python is configured with unicodedata, which is
necessary because building the target unicodedata Python module
requires having unicodedata support in the host Python.
The second commit enabled the unicodedata unconditionally in the host
Python, because it is needed by host-setuptools.
However, when the second commit was applied, the logic that consisted
in disabling unicodedate in the host Python when not needed was kept,
which resulted in breaking the build of host-setuptools due to the
lack of unicodedata support in the host python.
This commit fixes that by only leaving the unconditional
--enable-unicodedata in the host Python configuration options, and
therefore removing the problematic conditional --disable-unicodedata.
Fixes:
http://autobuild.buildroot.org/results/b62/b622fc14776f5a6c26ff0d1fb882f4ae6cccc5d8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python and python3 builds mark libpython as read-only which
prevents it from being stripped out correctly for the target.
Signed-off-by: Przemyslaw Wrzos <przemyslaw.wrzos@calyptech.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to bump setuptools to a much newer version, the host
python needs to be built with support for unicodedata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though jumping from 2.7.3 to 2.7.6 looks like a minor version
bump, it is in fact a fairly significant one, because a good number of
changes to help cross-compilation have been merged into Python
upstream. Therefore, most of our patches are affected by this change.
In detail, this commit:
* Renames all the patches to follow the naming convention of patches
in Buildroot: the patch file names should not have any version
number.
* The patches numbered above 100, that add configuration options to
disable certain modules of the Python standard library, are only
renamed and slightly adapted, they didn't change that much.
* The patches numbered below 100 are almost entirely rewritten: many
of the cross-compilation problems that used to exist in Python
2.7.3 no longer exist, and the number of remaining problems is
smaller, and can be fixed with smaller patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation to make the Python infrastructure support both Python
and Python 3, as well as the bump of Python 2 and 3, we need the
Python package to expose the Python module path in a variable called
PYTHON_PATH. It will be used by the following commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on the original new pkg patch submitted last Jan
and is part of the "Patchwork oldest patches cleanup #5".
[Peter: fix CONF_OPT indentation]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves the cross-compilation patches we have on top of
Python, to fix the problem of host library paths leaking into the
build of target modules, as seen at:
http://autobuild.buildroot.org/results/fcc/fccd7e08cd9d4713eb4208097dd48c5ab25749bc/build-end.loghttp://autobuild.buildroot.org/results/0bd/0bda780bf4b759b12edec26ac20b88cde617db4d/build-end.log
To do so, it ensures that the right python2.7/config/Makefile is used
when building target modules, and adjusts at runtime the paths read
from this Makefile if we are cross-compiling.
In addition, it installs the pgen program into the host directory, and
points the target python build to use python and pgen from $(HOST_DIR)
instead of from the host python source directory, which looks cleaner.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also move smtpd.py removal to the global remove useless files define.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already remove python2.7-config and the symbolic link
python-config, but we forgot to remove the python2-config symbolic
link.
Note that we can't use the <pkg>_CONFIG_SCRIPTS mechanism here because
python2.7-config is written in... Python, and doesn't follow the usual
syntax of <pkg>-config scripts. It takes the paths directly from
distutils.sysconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
