The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libsoup3 has a new API [1], packages using libsoup may not compile
with libsoup3 or may crash at runtime in unexpected ways, so we add a
new package. It can be installed side by site with libsoup, without
any conflict.
[1] https://libsoup.org/libsoup-3.0/ch02.html
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mhz is a tool to mathematically calculate the real running CPU frequency
and as such has proved as invaluable tool for developing CPUFreq and
similar features in the kernel.
Its source finally got a license recently so it can be packaged.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds esp-hosted package that allows to build the Linux
Kernel Driver for Espressif Esp32-* SoCs, that once programmed with
the corresponding firmware behave like a normal Wi-Fi module. Both
SDIO and SPI busses are supported and selectable.
Cc: Jesse Taube <jesse.taube@benettiengineering.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provides the `swaybg` utility, which is commonly used with `sway` to
manage background images/color configuration for the compositor.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add swugenerator as host utility to generate images for swupdate with
all the possible options available like encryption, passkey etc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-libconf is a pure-Python reader/writer for configuration files in
libconfig format, which is often used in C/C++ projects.
https://github.com/ChrisAichinger/python-libconf
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides an API suitable for the decode of
ARM(r) CoreSight(tm) trace streams.
OpenCSD is for example an optional dependency in the Linux
"perf" tool, starting from kernel version 5.1.
https://github.com/Linaro/OpenCSD
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A pure python library for creating multi-track MIDI files.
https://github.com/MarkCWirt/MIDIUtil
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Optional dependency of the upcoming libheif package.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Conmon is an OCI container runtime monitor.
https://github.com/containers/conmon
Dependency of podman.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a package for the Rockchip ATF binary blobs. These
binaries are needed to build U-Boot for some Rockchip SoCs (e.g.,
RK3588).
As there as so many binary blobs, for each suported SoCs, it is not
practical to introduce a choice, so one must manually define which
blobs (for bl31, tpl and optee) to use from the repository, that
match their actual board.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- simplify copying blobs
- slightly tweak help texts
- add hash for license file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Go 1.20 requires a minimum version of go 1.17.13 to bootstrap.
https://go.dev/doc/go1.20#bootstrap
As Go 1.4 was the previous version that could be compiled with C, there is now
no way to bootstrap go with a C compiler, unless we use a two-stage bootstrap:
- build host-go-bootstrap-1.4-20170531
- build host-go-bootstrap-1.19.10 with host-go-bootstrap-1.4-20170531
- build host-go-1.20 with host-go-bootstrap-1.19.9
This is implemented in this commit first, before upgrading host-go to 1.20.
Note: the .patch files from package/go version 1.19.x are not necessary for
package/go-bootstrap-stage2 and have not been included there.
Previous discussion of possible alternatives:
https://lore.kernel.org/all/CA+h8R2rtcynkCBsz=_9yANOEguyPCOcQDj8_ns+cv8RS8+8t9A@mail.gmail.com/https://lore.kernel.org/all/20220525234312.643dfc03@windsurf/T/
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move libclc to a new llvm-project subfolder
and specify site for the project. Since the version of libclc is more
recent than the version specified in LLVM_PROJECT_VERSION, don't change
it for now until a later update.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move clang to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move lld to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier, move llvm into the llvm-project folder
and use the defined information.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier in the future, group all llvm projects in
one subfolder and define some variables for all of them.
Introduce LLVM_PROJECT_VERSION_MAJOR to be used by the clang package
in a followup change.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is broken:
"It seems that you are using `distutils.command.build` to add
new subcommands. Using `distutils` directly is considered deprecated,
please use `setuptools.command.build`.
By 2023-Dec-13, you need to update your project and remove deprecated
calls or your builds will no longer be supported."
The last commit for this package occured on May, 30th, 2016.
The last issue was opened Jan, 31st, 2017 and was unanswered.
Fixes:
http://autobuild.buildroot.net/results/b57/b571d7838950e0b5ca67106cbcd9ba61b4f04a48/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Redis client written in C++
This is a C++ client library for Redis. It's based on hiredis, and is
compatible with C++ 17, C++ 14, and C++ 11.
https://github.com/sewenew/redis-plus-plus
Signed-off-by: Prabhu Sannachi <prabhu.sannachi@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
