Currently, we only support either Qt4 or gtk2, but OpenCV also
additionally supports Qt5 or gtk3, making for a choice of four
toolkits, one of: Qt4, Qt5, gtk3, gtk2 (and obviously, none).
Since Buildroot does not support coexistence of Qt4 and Qt5, we
can no longer select one and depend on the other, like so:
config BR2_PKG_OCV_WITH_QT4
bool "Qt4"
depends on !BR2_PKG_QT5
select BR2_PKG_QT
config BR2_PKG_OCV_WITH_QT5
bool "Qt5"
depends on !BR2_PKG_QT
select BR2_PKG_QT5
otherwise, we'd get a circular dependency chain in Kconfig, which would
complain with:
package/opencv/Config.in:57:error: recursive dependency detected!
package/opencv/Config.in:57: choice <choice> contains symbol BR2_PKG_OCV_WITH_QT5
package/opencv/Config.in:111: symbol BR2_PKG_OCV_WITH_QT5 depends on BR2_PKG_QT
package/qt/Config.in:5: symbol BR2_PKG_QT is selected by BR2_PKG_OCV_WITH_QT
package/opencv/Config.in:98: symbol BR2_PKG_OCV_WITH_QT is part of choice <choice>
Instead, we need to depend on either Qt version.
So, to have a consistent choice, we make all support for GUI toolkits
actually depend on the toolkit, rather than select it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: split-out the switch-selects-to-depends hunk
from the add-qt5 hunk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In OpenCV, only one GUI toolkit may be used at any one time, so group
the two existing options into a choice to make this situation explicit.
This will also be useful when we later add support for Qt5 and gtk3.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: tweak commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the minor version from the Kconfig symbol, so we can seamlessly
update the versions without having to handle legacy stuff.
Note: not adding legacy handling, as we haven't had any release with
those symbols yet.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Chris Becker <goabonga@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
refclock_pcf.c contains code using the tm_gmtoff member of struct tm, which
is only available on uClibc if it is built with __UCLIBC_HAS_TM_EXTENSIONS__.
This change date back to:
commit 7129da009c
Author: Eric Andersen <andersen@codepoet.org>
Date: Sat Jan 18 21:27:22 2003 +0000
Merge a bunch of stuff over from the tuxscreen buildroot, with
many updates to make things be more consistant.
-Erik
But nowadays our uClibc configs DO enable __UCLIBC_HAS_TM_EXTENSIONS__, so
it is no longer needed and can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop sed line which no longer changes anything as upstream has changed to
use strrchr. Worse, it bumps each ntpd/*.c file's modification time, which
sometimes triggers a strange dependency path causing the makefile to attempt
to run the ntpd keyword-gen app, which fails, because it's been
cross-compiled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If sane is installed system-wide on the build machine, then the
sane-config binary found is the one of the system, which returns
incorrect library paths for cross-compilation.
To fix this, this commit adds a patch to wine to make it support a
SANE_CONFIG environment variable, and then adjusts wine.mk to
explicitly pass the path to $(STAGING_DIR)/usr/bin/sane-config.
Fixes:
http://autobuild.buildroot.org/results/8bd/8bdc1eed55075313403aa8a6c9af6a427bce198e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The package comes with usable .service files for smbd, nmbd and
winbind, but does not install them.
[Thomas: use relative paths for the symbolic links.]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
squid comes with a .service file, but does not install it.
[Thomas: use relative path for symlink instead of absolute path.]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Usable .service file is provided in the package.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds 2 patches (backported from upstream) to vlc fixing the
build against opencv2 APIs.
This allows to select the minimal set of opencv modules when opencv
support is enabled.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the 2.4.10 release, OpenCV supports both Gstreamer-0.10
and Gstreamer-1, but only one can be enabled at the same time (OpenCV
chooses Gstreamer-1 over Gstreamer-0.10 when both are available).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenCV 3.0 support both gstreamer-0.10 and gstreamer-1.x, but only one
is used at the time.
This patch turns the gstreamer support into a choice, in order to prepare
adding the support for gstreamer-1 in a following patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In file included from libavcodec/cabac_functions.h:46:0,
from libavcodec/h264_cabac.c:37:
libavcodec/h264_cabac.c: In function 'ff_h264_decode_mb_cabac':
libavcodec/x86/cabac.h:192:5: error: 'asm' operand has impossible constraints
__asm__ volatile(
To reproduce the bug use this defconfig:
BR2_GCC_VERSION_5_1_X=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_NONFREE=y
BR2_PACKAGE_FFMPEG_FFPLAY=y
BR2_PACKAGE_FFMPEG_FFSERVER=y
BR2_PACKAGE_FFMPEG_FFPROBE=y
BR2_PACKAGE_FFMPEG_AVRESAMPLE=y
BR2_PACKAGE_FFMPEG_POSTPROC=y
[Thomas: add a comment in the code.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f21b2558a0 ("busybox: added
linux-pam support"), we added optional support for PAM in
Busybox. However, this support requires the toolchain to have thread
support, which causes build failures with non-thread capable
toolchains.
This commit therefore enables Busybox PAM support only if the
linux-pam package is available *and the toolchain has thread support.
Fixes:
http://autobuild.buildroot.org/results/1a3/1a380aaca9303b67cc59165d56cf12f35966fe26/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In case FOO_OVERRIDE_SRCDIR has trailing spaces, like so:
FOO_OVERRIDE_SRCDIR = /path/to/sources\x20
we would end up with a rsync command like so:
rsync -au /path/to/sources / /path/to/build/foo
which would effectively rsync the whole vfs, eventually filling the
whole disk... :-(
So, just qstrip the variable before use.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the *-install-target phase the manifest file is being updated, if multiply packages try to update it they fail.
To avoid multiple access to the manifest file use flock to sync
multiple luarocks packages.
e.g. installing three luarocks packages:
make lua-cjson-build lua-coat-build lua-coatpersistent-build
make lua-cjson lua-coat lua-coatpersistent -j
Fix error:
Updating manifest for /home/tetsuya/buildroot/br2/output/target/usr/lib/luarocks/rocks
No existing manifest. Attempting to rebuild...
Error: rock_manifest file not found for lua-coat 0.9.1-1 - not a LuaRocks 2 tree?
[Thomas: get rid of LUAROCKS_RUN, and use LUAROCKS_RUN_ENV +
LUAROCKS_RUN_CMD everywhere.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost and jack2 packages fail to build when PARALLEL_JOBS is empty
so instead of using an empty PARALLEL_JOBS don't use it in the MAKE
variable when top-level parallel make is being used.
To simplify the use of top-level parallel make, check the MAKEFLAGS
variable to know automatically if the -j option is being used, also use
the "=" operator instead of the ":=" operator because the MAKEFLAGS
variable can be checked only in a "recursively expanded variable".
The "override" keyword must be used in order to change the automatic
variable "MAKE".
When the top-parallel make is being used the sub-make are called without
specifying the "-j" option in order to let GNU make share the job slots
specified in the top make. This is done because GNU make is able
to share the job slots available between each instance of make so if you
want to increase the number of jobs you just need to increase the <jobs>
value in the top make -j<jobs> command.
If we specify the -j<jobs> option in each instance of make, it is less
efficient, e.g. in a processor with 8 cores we specify -j9 in each instance:
the number of processes goes up to 81 because each sub-make can execute
9 processes. The excessive number of processes is not a good thing
because in my tests even -j16 is slower than -j9.
Instead if we don't specify the -j<jobs> option in the sub-make, the top
make share the job slots automatically between each instance, so the
number of process in this examples goes up to 9 that is faster than
using up to 81 processes.
e.g. when the -j3 option is specified only in the top make:
possible state n. 1:
process 1 - <packagea>-build
process 2 - <packagea>-build
process 3 - <packagea>-build
possible state n. 2:
process 1 - <packagea>-extract
process 2 - <packageb>-configure
process 3 - <packagec>-build
possible state n. 3:
process 1 - <packagea>-build make -j1
process 2 - <packageb>-build make -j1
process 3 - <packagec>-build make -j1
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a set of patch to add support for warpboard
(Freescale board based on imx6sl)
The patch contains :
- defconfig for warpboard
- linux patches from Fabio Estevam to fix device tree due to last change on
warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which
use incorrect hci protocol
- specific firmware file for warpboard bluetooth
nvram : brcmfmac4330-sdio.txt
Origin of nvram config file for wifi :
https://github.com/Freescale/meta-fsl-arm-extra
[Thomas: misc rewording/improvements in the README file.]
Signed-off-by: Arthur LAMBERT <arthur@dreem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes one remotely-triggerable issue that was found by the Codenomicon
Defensics tool, one potential remote crash and countermeasures against
the "Lucky 13 strikes back" cache-based attack.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other nodejs-related packages will need to call npm with the same set of
arguments as is currently used by the nodejs package itself.
To avoid duplicating this code, set the NPM variable so those packages can
re-use it.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many packages use node-pre-gyp as a way of deploying precompiled binary
dependencies with fall back to compilation for other targets. Currently
installing node modules that use node-pre-gyp can fail to use the correct
binary for the target. This patch fixes this issue by correctly
configuring node-pre-gyp.
Firstly, node-gyp uses the option --arch to determine its target
architecture (which is already set correctly), however, node-pre-gyp uses
--target-arch. Without this set node.js packages that uses node-pre-gyp
will pick the wrong target architecture.
Secondly, the use of precompiled binary packages is not desirable due to
potential security and licensing issues. To solve this we use the
--build-from-source option to force node-pre-gyp to always build the C++
code.
This patch passes npm_config_target_arch and npm_config_build_from_source
to npm which causes --target-arch and --build-from-source to be passed to
node-pre-gyp.
I have tested this using the node.js package serialport which now
successfully builds and runs.
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch symlinks all executables in /usr/lib/node_modules/.bin
to /usr/bin so that node.js modules installed using
BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL are accessible from the command line.
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version of the V8 JavaScript engine used by node.js v0.12.5 requires
at least an ARMv6 architecture with VFPv2. For this reason v0.10.39
remains the default for ARMv5 targets, all other targets now default to
v0.12.5.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lots of fixes have been made to ltrace, including the ones for fixing a
build failure for MIPS architecture. Updating to current master will
allow us to re-enable this package for MIPS and also remove some
upstreamed patches.
At the same time we add a patch made by Jérôme Pouiller to fix a bug
introduced by 5ba9e10 ("Split type definitions from the bundled configs
into their own files"). Two new configuration files are not installed.
Therefore, ltrace fail with messages like :
/usr/share/ltrace/libm.so.conf:333: error: unknown type around 'ldouble
erfl(ldouble);
That patch has been sent upstream.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
checking for /home/fli4l/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99... unsupported
configure: error: Building libdrm requires C99 enabled compiler
using this defconfig
BR2_KERNEL_HEADERS_4_0=y
BR2_BINUTILS_VERSION_2_25=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_LIBDRM=y
Patch inspired by
http://git.buildroot.net/buildroot/commit/?id=5cf5b390385fb6325485e37dc9d38e1e3ac1f091
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptsetup does not actually depend on e2fsprogs, but on libuuid that is a
dependency of e2fsprogs. Remove the e2fsprogs dependency, and add a direct
dependency on util-linux (libuuid provider).
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, there are only two possibilities regarding the root account:
- it is enabled with no password (the default)
- it is enabled, using a clear-text, user-provided password
This is deemed insufficient in many cases, especially when the .config
file has to be published (e.g. for the GPL compliance, or any other
reason.).
Fix that in two ways:
- add a boolean option that allows/disallows root login altogether,
which defaults to 'y' to keep backward compatibility;
- accept already-encoded passwords, which we recognise as starting
with either of $1$, $5$ or $6$ (resp. for md5, sha256 or sha512).
Signed-off-by: Lorenzo M. Catucci <lorenzo@sancho.ccd.uniroma2.it>
[yann.morin.1998@free.fr:
- don't add a choice to select between clear-text/encoded password,
use a single prompt;
- differentiate in the password hook itself;
- rewrite parts of the help entry;
- rewrite and expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Acked-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-libtool can fail to build if the host is missing makeinfo, so
disable it.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In this case -DMESA_EGL_NO_X11_HEADERS is needed during compilation.
Fixes this build error
make[1]: Entering directory `/home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/cores/dvdplayer'
CPP xbmc/cores/dvdplayer/DVDPlayerVideo.o
In file included from /home/fli4l/br8_kodi/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/EGL/egl.h:36:0,
from /home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/windowing/egl/WinSystemEGL.h:28,
from /home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/windowing/WindowingFactory.h:39,
from DVDPlayerVideo.cpp:23:
/home/fli4l/br8_kodi/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/EGL/eglplatform.h:118:22: fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
^
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option is controlled later on inside this if-clause
ifeq ($(BR2_PACKAGE_KODI_OPTICALDRIVE),y)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With raspberrypi_defconfig:
libv4l2rds.c:256:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
for (int i = 0; i < tuning->station_cnt; i++) {
^
libv4l2rds.c:256:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
>From build/libv4l-1.6.2/config.log:
configure:4709: checking for .../host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc option to accept ISO C99
configure:4858: .../host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -std=gnu99 -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:54:9: error: unknown type name 'wchar_t'
const wchar_t *name;
The C99 detection problem seems more related to missing wchar_t type support than the compiler option?
Adding LIBV4L_CONF_ENV = ac_cv_prog_cc_c99='-std=c99' gives a lot of compile errors like:
libv4lconvert.c: In function 'dev_ioctl':
processing/../libv4lsyscall-priv.h:85:10: error: 'SYS_ioctl' undeclared (first use in this function)
syscall(SYS_ioctl, (int)(fd), (unsigned long)(cmd), (void *)(arg))
^
libv4lconvert.c:43:9: note: in expansion of macro 'SYS_IOCTL'
return SYS_IOCTL(fd, cmd, arg);
^
processing/../libv4lsyscall-priv.h:85:10: note: each undeclared identifier is reported only once for each function it appears in
syscall(SYS_ioctl, (int)(fd), (unsigned long)(cmd), (void *)(arg))
^
libv4lconvert.c:43:9: note: in expansion of macro 'SYS_IOCTL'
return SYS_IOCTL(fd, cmd, arg);
^
Adding LIBV4L_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' solves all configure/compile errors.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Binutils 2.24 produces broken code when compiling the kernel for
ppc64le, so prevent this combination. See:
https://sourceware.org/ml/binutils/2013-12/msg00200.html
The problem manifests early in the boot process with "Kernel access of
bad area, sig: 11" in arch_match_cpu_phys_id().
The fix has been merged upstream as commit
57fa7b8c7e59e35bced580f9bcb9668af43fdbce, which is available since
Binutils 2.25.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This combination causes a compilation failure of the host-gcc-final
recipe like this one:
/br/output/host/usr/mips-buildroot-linux-gnu/bin/ld:
.libs/gload.o: relocation R_MIPS_HI16 against `__gnu_local_gp' can not
be used when making a shared object; recompile with -fPIC
The problem is the file 'libatomic/gload.c' is compiled without -fPIC
when using binutils-2.25. All gcc (with libatomic) versions below 4.9.3
are affected by this issue.
Here is a summary of affected/unaffected versions in Buildroot:
4.7.x: unaffected (doesn't have libatomic)
4.8.x: affected
4.9.x: unaffected (we have 4.9.3 which is fixed)
5.1.x: unaffected
The fix can be found here:
57f5c0954f
However, given the following reasons...
- Upstream gcc 4.8 branch is closed.
- The fix is very hard to backport from 4.9 to 4.8.
- This stuff is insanely sensitive and not working at all could be
better than looking like it works but not quite.
...I think the best choice is to disable that combination in Buildroot.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
