Add libarchive hash. Enable lzma support.
Both xz and lzma support are provided by the xz library.
[Thomas: explicitly pass --with-lzma when xz is available.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that this situation is not ideal because it only add openmp support
to the Buildroot toolchain, not the external ones; but a couple of
packages already are in this situation.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opencv_python module needs python-numpy because it uses some numpy
headers in this wrapper.
>From its 2.4 release, OpenCV offers python bindings, but they required
most of the OpenCV modules to be enabled.
Since OpenCV-3.0.0, python bindings have been reworked:
- it now supports both python2 and python3
- only built modules supporting wrapped in python will be included in
the bindings.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change allows to reduce the size of the default OpenCV package, so
the final root filesystem.
However, this will break any existing defconfig enabling OpenCV. Indeed,
a minimal OpenCV package will be built, whereas, prior to applying this
patches, a full-featured one would have been built instead.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since its integration into Buildroot, OpenCV always enables all modules
by default because the inter-module denpedency were not supported.
Now that OpenCV inter-module dependencies are correctly set at the
Buildroot configuration level, it is possible to reduce the enabled
module list to its minimal set, letting kconfig enable the other
modules.
This change will not change anything WRT a defconfig build with opencv.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is mostly cosmetic changes improving the human interface.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).
However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The opencv plugin uses stuff from the now removed opencv's legacy module.
Note that the configure script already correctly check the opencv version
and disable the opencv plugin with opencv-3.x.
Also remove 'select ...' to prevent kconfig from complaining about
recursive dependencies.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This major version bump is in fact a bump from 2.4.10 to 2.4.11, then to
3.0.
OpenCV-2.4.11 improves a lot the Buildroot integration, including a
couple of patches that are no longer needed:
- x86 PIC code compilation fix in core module [1];
- return type fix in superes module [2];
- opencv.pc generation [3].
It also improves the gstreamer-0.10/1.x detection [4], that will be
needed in a follow-up patch.
OpenCV-3.0 still requires 2 patches (backported from upstream fixing
pthread support [5,6].
The OpenCV-3.0 does some major changes, for which a transition guide
has been published [7].
Among these changes coming with OpenCV-3.0, some new modules have been
introduced and others got removed; leading to a bunch of configure
option updates (to keep as much as possible an iso-functional-perimeter)
and the legacy menu has been updated too.
The worth noticing removals being:
- the opencv_legacy and opencv_nonfree modules no longer exist;
- the opencv_contrib module has moved out of the opencv base tree and
now has its own repository [8].
There is currently no plan to support it.
Some 3rd-party supports have been improved or added; their integrations
in Buildroot will be addressed in follow-up patches.
[1] ea50be0529
[2] 2e393ab833
[3] eceada586b
[4] 38bb0db9db
[5] 1f983ec39c
[6] a482dcce46
[7] http://docs.opencv.org/master/db/dfa/tutorial_transition_guide.html
[8] https://github.com/itseez/opencv_contrib
[Thomas:
- address most contents made by Yann E. Morin on the Config.in file.]
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No new option added nor removed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libucl is a high performance and flexible JSON/YAML/etc. parser for C.
https://github.com/vstakhov/libucl
[Thomas:
- remove hash file, should not be used for github downloads
- rewrap Config.in help text
- remove trailing white space in Config.in.
- add missing host-pkgconf dependency, without which the package
doesn't autoreconf properly.
- fix license: it is BSD-2c, not just BSD.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Helps drop some patches and hence autoreconf saving time.
Also allows parallel builds.
And fixes:
http://buildroot-busybox.2317881.n4.nabble.com/PATCH-v2-heimdal-explicitly-set-lpthread-td99422.html
without the need to hardcode libraries (disables/withouts weren't enough
though i've added them anyway for correctness).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change to new homepage since maintainer changed as well.
Add hash file based on tarball signature file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).
So drop them as they only cause confusion.
grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
if (!execute_all(iface, "pre-up")) return 0;
if (!execute_all(iface, "up")) return 0;
if (!execute_all(iface, "down")) return 0;
if (!execute_all(iface, "post-down")) return 0;
grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
if (!execute_scripts(iface, doit, "pre-up"))
if (!execute_scripts(iface, doit, "up"))
if (!execute_scripts(iface, doit, "down"))
if (!execute_scripts(iface, doit, "post-down"))
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the Git repository instead of the snapshots,
since they are not generated anymore.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove kernel headers check since it now implements local definitions to
keep working with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a fix for building uClibc 0.9.33.2 and uClibc-ng
1.0.3 with gcc 5.1 on ARM, since we're about to add support for gcc
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configure the sudo utility to support PAM if the framework is enabled.
[Peter: use install -D, reword commit message]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eglibc is a dead project and has not been making any release since a
while, now that glibc is back and kicking. So let's deprecated our
eglibc support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that both gdb 7.9 and 7.9.1 fail to build in a chroot without
texinfo, due to the infamous makeinfo issue. This should be fixed
separately.
[Peter: fixup white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:
* Kept as is, sometimes after minor adjusments:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
850-libstdcxx-uclibc-c99.patch
860-cilk-wchar.patch
* Dropped:
110-pr64896.patch
111-pr65730.patch
* Split in multiple parts:
900-musl-support.patch
The patches from Crosstool-NG for muls support are used instead of
one single patch.
* Renamed:
910-gcc-poison-system-directories.patch to
200-gcc-poison-system-directories.patch
920-libgcc-remove-unistd-header.patch to
201-libgcc-remove-unistd-header.patch
Since the 9xx part of the series is now used by the various musl
related patches.
We have tested the following configurations, with a minimal Busybox
system:
* ARM, uClibc-ng
* ARM, glibc
* ARM, musl
* x86, uClibc-ng and uClibc 0.9.33.2
* x86, glibc
* x86, musl
All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:
devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps uClibc-ng to the latest version, and drops the two
patches that have been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.
[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some egl implementations needs special compiler flags or defines (E.G.
mesa3d for wayland needs to pass -DMESA_EGL_NO_X11_HEADERS to not try to
include X11 headers). This is correctly included in the .pc file, but the
configure logic doesn't use pkg-config so help it along.
Likewise, some implementations may need to link against other libraries, so
also pass LIBS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 83e29f2656 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration option for the
eglglessink plugin as a consequence of its removal in 1.3.1. However,
that commit did not add support for glimagesink, the plugin element to
be used as a replacement, which broke support for the EGL/GLES video
sink feature in Buildroot.
This new commit adds support for the OpenGL library and the
corresponding gl plugin, including the glimagesink element among others.
The plugin needs the library, but the library can also be used
separately in order to link custom plugins or applications against it.
The library needs at least one OpenGL API, one OpenGL platform and one
compatible window system. The implementations of these requirements that
Buildroot can currently provide are:
- APIs: OpenGL, OpenGL ES 2.X,
- platforms: GLX, EGL,
- window systems: X11, Wayland, Dispmanx.
The wayland configure feature switch is shared between the corresponding
OpenGL library window system and the waylandsink plugin.
This has been tested with videotestsrc/omxmpeg4videodec/omxh264dec and
glimagesink on the Raspberry Pi, using OpenGL ES 2.X, EGL and Dispmanx.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
