Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has a buildroot local patch
0001-build-Use-MYSQL_CONFIG-variable-instead-of-mysql_con.patch
This patch was submitted and applied upstream.
https://sourceforge.net/p/libdbi-drivers/mailman/message/37370618/
Bumping to this commit allows to discard the no more needed
buildroot local patch.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since I'm the upstream maintainer, it'd be nice to get Cc:ed on any
issues with the package.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the comment so it doesn't need to be updated when changing the
version.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BLK_DEV_IDE_PMAC driver has been removed from the kernel, so use the
libata replacement PATA_MACIO. This requires enabling ATA and BLK_DEV_SD
for the disk to show up, and changing the command line to use /dev/sda.
YENTA depends on PCCARD, so enable it.
The UART does not show up in /dev without DEVTMPFS.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2021-25219: Lame cache can be abused to severely degrade resolver
performance
For details, see the advisory:
https://kb.isc.org/docs/cve-2021-25219
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the rework of boot/config
file handling in commit 689b9ac439 (fix
made in b8c8fcee7a was incomplete):
/usr/bin/install: cannot stat '/home/buildroot/autobuild/instance-0/output-1/build/rpi-firmware-2ef3800b1b71c0e30c2a61ecad6e007ae96ea342/boot/fixupx.dat': No such file or directory
Fixes:
- http://autobuild.buildroot.org/results/c91224af44327a301f87f239a73721173b81ce16
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This option is only available in master and not any release.
Fixes:
output/build/libpsl-0.21.1/meson.build:1:0: ERROR: Unknown options: "docs"
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add configuration switch BR2_PACKAGE_OPTEE_CLIENT_RPMB_EMU to define
whether RPMB emulation is enabled or not. It is default enabled for
backward compatibility.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Restore support for BR2_STATIC_LIBS in optee-client, removed by
[1] to overcome an issue introduced in OP-TEE 3.13.0 that mandates
support for shared libraries.
As OP-TEE expects to be functional on OSes without dynamic shared
library support, change [2] was merged in OP-TEE tag 3.15.0 to fix the
initial issue introducing new configuration switch CFG_TEE_SUPP_PLUGIN.
When disabled, optee-client plugin support is not embedded and
optee-client can built with static libraries support only.
Link: [1] commit 321a850bc7 ("package/optee-client: add dependency on !BR2_STATIC_LIBS")
Link: [2] f59114370f
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove efi-ldsdir meson config option which is no longer used.
Meson config variable systemd-analyze is renamed to analyze.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove python3-requests host package and combine with python-requests.
Make packages depending on host-python3-requests depend on
host-python-requests instead.
Drop idna patch that is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The php-pecl-dbus package provides a PHP extension for interaction
with D-Bus busses.
https://github.com/derickr/pecl-dbus
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for watchdogd, a watchdog daemon with built-in
process supervisor[1] as well as support for monitoring memory & file
descriptor leaks, and CPU load average. When a monitored resource
reaches a high watermark, a warning message is logged and when critical
level is reached, the cause is saved and the system is rebooted. On
reboot the reset cause can be retrieved to help locate the culprit.
Support for SysV init script in this patch, and systemd unit file is
installed from the one bundled with the package. Both files supoort
additional command line options in /etc/default/watchdogd.
The Config.in is slightly big, but allows for disabling or adjusting
the poll interval for each resource monitor.
For more information, see https://github.com/troglobit/watchdogd
[1]: processes must have their main loop instrumented for supervision.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current documentation was poorly organized, with for example the
"Here is an example walk through of running a test case" sentence
followed by the explanation of how to list available test cases, but
not how to run one.
Many other aspects of the wording were confusing, or not really
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The directory that containts tests is "support/testing/tests/", not
"supporting/testing/test".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current Gitlab CI mechanism allows to trigger all tests in a CI
pipeline by pushing a branch named <something>-runtime-tests, or to
trigger a single test in a CI pipeline by pushing a branch name
<something>-tests.<name of test>.
However, there are cases where it is useful to run a suite of tests,
for example to run all tests in tests.init.test_busybox.
This commit makes that possible by extending the current semantic of
<something>-tests.<name of test> to not expect a complete test name,
but instead to accept all tests that starts with the given pattern.
This allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox.TestInitSystemBusyboxRo
like it was the case before. But it now also allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox
to run all Busybox tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
kmscube requires a libgbm implementation, which until now, only Mesa3D
was providing, so kmscube had a direct dependency on Mesa3D.
However, now that we have a proper libgbm virtual package, so this
commit converts the kmscube package to use the libegl, libgbm and
libgles virtual packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : add dependency on recent libgbm ]
[Arnout: fix syntax of Config.in comment; order depends alphabetically]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce gbm features so that each packages depending
on it can choose which implementation is required.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since 18.0-Leia, Kodi implements stand-alone gbm support alongside x11 &
wayland. To enable building libgbm in mesa3d without x11 & wayland we
need to create a virtual package for libgbm.
Also other packages besides mesa3d may provide libgbm.so, see
http://patchwork.ozlabs.org/patch/647235/http://patchwork.ozlabs.org/patch/939703/
It turns out that libgbm has seen several additions in its API over
time, and therefore not all libgbm implementations provide support for
all features. In order to account for this, this commit adds two hidden
boolean options that allow libgbm providers to indicate which optional
features they support:
BR2_PACKAGE_LIBGBM_HAS_FEATURE_FORMAT_MODIFIER_PLANE_COUNT and
BR2_PACKAGE_LIBGBM_HAS_FEATURE_DMA_BUF. These booleans must be selected
by the packages providing libgbm implementations, and depended on by
packages using libgbm.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[ Kamel : introduce gbm api features ]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Linux supports No-MMU RISC-V 64-bits since kernel version 5.8. Make
MMU optional to enable building for RISC-V 64-bits boards that do not
have one. MMU use of RISC-V 32-bits builds remains mandatory for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using *-uclinux-* seems like an only partially followed convention.
And at least RISC-V 64-bits gcc does not know about uclinux tuples.
So switch back to the normal "linux" one for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Make the change conditional on BR2_RISCV_64 being "y".
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable selecting elf2flt for RISC-V 64-bits no MMU builds and add
support for it in the form of an additional patch (upstream pull request
https://github.com/uclinux-dev/elf2flt/pull/22).
Also modify the package Makefile.in file to add the -fPIC option to
the target CFLAGS for RISC-V 64-bits no MMU builds.
This patch is based on initial work by Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_BINFMT_FLAT_ONE is selected, elf2flt must be invoked with the
"-r" option to ensure that a single contiguous binary image is created,
regardless of the architecture default image format implemented by
elf2flt.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
