All in-tree configs with the uboot bootloader use a custom version,
so this patch is mostly for the menuconfig default uboot version
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested on a Raspberry PI4 with a SNOM 360 and a SIP Trunk to Easybell.
Attention: chan_sip is deprecated, use chan_pjsip instead.
For chan_pjsip you need to enable openssl otherwise the module will not
load.
Patches 0005 and 0006 are applied upstream.
Remove unused configure options:
--without-curses
--without-isdnnet
--without-misdn
--without-nbs
--without-oss
--without-sqlite
--without-suppserv
--without-termcap
--without-tinfo
--without-vpb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of openssl to version
3.2.0 in commit 973b1eba5a:
In file included from BnValues.h:327,
from Global.h:80,
from Tpm.h:78,
from ACTCommands.c:62:
TpmToOsslMath.h:83:5: error: #error Untested OpenSSL version
83 | # error Untested OpenSSL version
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/f22867e71dca64d4ab5fee4db39fe9b1899f4b85
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix#27: possible buffer overrun in uev_run()
- Update hash of LICENSE file (update in year with
0f59096154)
https://github.com/troglobit/libuev/blob/v2.4.1/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The condition checking whether the webrtc-audio-processing package is
enabled, added in commit
3ccd3b4c38 ("package/pipewire: bump to
version 0.3.32") is obviously incorrect, and can never be true.
Fix the condition to use the correct variable instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom Northstar images allow installing (flashing) them using vendor UI
or CFE bootloader.
The change of DTS files paths ("broadcom/" prefix introduction in Linux
6.5+) prevented post script from generating them.
Adjust post-image.sh to deal with new paths.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is now support in both upstream U-Boot and upstream Linux.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.14.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that profile mode is an option for the flutter-engine package, the logic
in package/flutter-sdk-bin/flutter-sdk-bin.mk is no longer sufficient.
The profile/debug/release logic was inspired by:
https://github.com/meta-flutter/meta-flutter/blob/kirkstone/conf/include/
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- make FLUTTER_ENGINE_RUNTIME_MODE_PROFILE win over
BR2_ENABLE_RUNTIME_DEBUG
- don't set variables to empty string
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that it is handled globally in TARGET_MAKE_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A number of packages try to detect if they are running in a git repo and run
git describe at build time instead of using the hard coded version number if
it succeed, leading to odd version numbers as they end up picking up the
Buildroot git version if building inside a Buildroot git checkout, E.G.:
rauc --version
rauc 2023.11-562-g9c954953b4+
This is because rauc builds with meson and uses vcs_tag:
https://github.com/rauc/rauc/blob/v1.11/meson.build#L168-L171https://mesonbuild.com/Reference-manual_functions.html#vcs_tag
Another example is micropython, where we already work around it by passing
GIT_DIR=.
In the context of Buildroot the packages are never built in their own git
checkout, so pass GIT_DIR=. to ensure git doesn't walk back up the
directory tree and finds the Buildroot git repo, which fixes the rauc (and
similar) issues.
>>> rauc 1.11 Building
..
ninja: Entering directory `/home/peko/source/buildroot/output-rauc/build/rauc-1.11//build'
[1/29] Generating version.h with a custom command
fatal: not a git repository: '.'
cat output-rauc/build/rauc-1.11/build/version.h
#define PACKAGE_STRING "rauc 1.11"
#define PACKAGE_VERSION "1.11"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building for i386 raises the following build failure since the additon
of the package in commit 3e4b479f39:
Makefile:23: *** "The architecture i386 isn't supported". Stop.
Setting ARCH=x86 won't work either as it results in the following build
failure:
compel/arch/x86/plugins/std/memcpy.S: Assembler messages:
compel/arch/x86/plugins/std/memcpy.S:20: Error: bad register name `%rdi'
compel/arch/x86/plugins/std/memcpy.S:21: Error: bad register name `%rdx'
compel/arch/x86/plugins/std/memcpy.S:22: Error: `shrq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/memcpy.S:24: Error: `movsq' is only supported in 64-bit mode
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S: Assembler messages:
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:13: Error: bad register name `%rcx'
compel/arch/x86/plugins/std/syscalls/syscall-common-x86-64.S:19: Error: bad register name `%rax'
Fixes:
- http://autobuild.buildroot.org/results/94cc463762b57efacf743d107a8dda7660a995a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot only offers two possible runtime modes for Flutter that are
automatically selected based on what the user has selected:
- debug if BR2_ENABLE_RUNTIME_DEBUG is enabled.
- release if BR2_ENABLE_RUNTIME_DEBUG is not enabled.
However, Flutter also offers the profile runtime mode option.
From https://docs.flutter.dev/testing/build-modes:
```
"Use profile mode when you want to analyze performance."
What is profile mode?
Some debugging ability is maintained in profile mode, which is enough to
profile your app's performance. Profile mode is turned off on the emulator
and simulator because their behavior does not represent actual performance.
```
As Flutter projects can be heavy and consume many resources, it is necessary
to allow users developing a Flutter application to profile their application
during development.
This patch introduces a new choice: FLUTTER_ENGINE_RUNTIME_MODE_PROFILE.
If unselected, the global option BR2_ENABLE_RUNTIME_DEBUG continues to
determine whether to build Flutter in release or debug mode. This new option
may confuse some users who wonder where the release and debug options are, so
the help menu section under the FLUTTER_ENGINE_RUNTIME_MODE_PROFILE option
explains that the global BR2_ENABLE_RUNTIME_DEBUG option controls the debug
and release modes.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- move plugin description, from commit log, to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There are 14 commits between the current version of d62e84 and f34d7b.
Some highlights include:
- egl_gbm_render_surface: fix initialization of is_locked:
- src/egl_gbm_render_surface: properly fallback to surface with no modifier
(so we can drop our patch)
- user input: store mt positions separately
- video player: Transition to READY before NULL
- check all malloc returns
In addition, commit 6a28738 introduces the charset_converter, which is a
platform-side implementation of the charset_converter plugin found here:
https://pub.dev/packages/charset_converter
As this is a new plugin, disable it; a follow-up commit will add an
option to enable it.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently the tests TestRust and TestRustBin do check for vendoring by
requiring package ripgrep to be built but only if the download
directory is already empty, otherwise the existing contents of the download
directory will be reused and therefore not be redownloaded.
This new test will only verify that the required packages are downloaded
and vendored correctly without doing a runtime test. It does so by setting a
path to a folder "dl" inside the build directory (output-directory/testname/)
and then setting the environment variable BR2_DL_DIR to this path before the
build starts. BR2_DL_DIR is not set in the config options because it would be
overridden by the user's own environment variable if defined. This code was
essentially copied from the file test_gitforge.py which was added in commit
1ca6ab6ace
We want the package ripgrep to be built since it requires vendoring
directly. Additionally we want the package python-cryptography to be
built because it has rust dependencies and therefore indirectly also requires
vendoring.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 768f9f80f6 (support/download: generate even more reproducible
tarballs) causes non-reproducibility in tarballs we previousy
generated, especially the archives for two cargo-vendored packages,
ripgrep and sentry-cli.
The cause is that those two pakcages eventually vendor a file that has
the u+x bit set, but is otehrwise go-x. With 768f9f80f6, the files are
now go+x, so the hash for those generated archives has changed.
Besides, that commit was wrong: it did not account for the 'r' bit for
go part, leaving some non-reproducibility still unaccounted for.
So, to generate really reproducible archives, we would need to fix that
read bit as well, and that has the potential to affect all the archives
we generated so far. If we wanted to do so, we'd need a way to version
all generated archives, like we do for git and svn, but now for all the
different CVSes, as well as for all the vendoring post-processes.
For 768f9f80f6, all that was of conern was the working copies of CVSes
(i.e. git, svn, cvs...) that we cache in the Buildroot download dir, not
the temporary files during post-processing. Indeed, in that latter case,
the user has virtually no way to mangle with the mode of the
intermediate extract before repack.
And we do have a big fat warning that users should not attempt to meddle
with the git tree that Buildroot caches.
As 768f9f80f6 however demonstrates, is that it took quite a long time
between the introduction of the git caching, and the time someone
eventually discovered they could meddle in there. This shows that the
issue it not actually critical in most setups.
Also, the tar manual [0] hints at a better solution to handle
reproducibility, which even avoids touching the files on disk which is
even nicer:
‘--mode='go+u,go-w'’
Omit irrelevant information about file permissions.
If we were to actually handle the mode bit for reproducibility, we'd
need to:
- introduce archive versioning for all download backends and
prost-processing
- use the tar officially suggested method
So, revert that change, as it was incomplete, was not really fixing much
issues, and causes actual issues.
This reverts commit 768f9f80f6.
[0] https://www.gnu.org/software/tar/manual/tar.html#Reproducibility
Thanks to Vincent and Arnout for pointing at the tar manual.
Reported-by: Antoine Coutant <antoine.coutant@smile.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Commit 6d163e12a4 (package/udev: move render and sgx to
package/systemd) moved the sgx group creation to the systemd package because
eudev at that time did not reference it. This changed in eudev 3.1.12 with
commit a8ffcd1b985fb4 (rules/50-udev-default.rules: fix issue 160) so move
it back to get rid of a warning from udevd:
udevd[303]: specified group 'sgx' unknown
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed their --{en,dis}able-telemetry option, and replaced it
with --{en,dis}able-analytics.
A subsequent look at the rest of the file including the logic around the
change of the name of the above option provides no other elevant changes
that would apply to this package update.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-gallery was erroneously placed under the "Graphic libraries"
section of the menu "Graphic libraries and applications (graphic/text)"
menu. However, as flutter-gallery is a flutter-based graphical user
interface (GUI) application, it is better suited to be placed under the
"Graphic applications" section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi was erroneously placed under the "Graphic libraries" section
of the menu "Graphic libraries and applications (graphic/text)" menu.
However, as flutter-pi is an application that runs graphic applicaitons
it is better suited to be placed under the "Graphic applications"
section.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's drop local patch thas has been upstreamed but another one to fix
linking failure due to meson and Makefile unalignment. Also, now libtracefs
samples require pthread, but we don't want samples to be built to save
target size and reduce dependencies counot, so let's disable it by setting
meson samples variable to false in LIBTRACEFS_CONF_OPTS.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: do an actual backport now it's upstreamed]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a choice to allow using the Wayland variant of the r6p2 Mali driver.
When selected, the package is marked as provider for libgbm as
libMali.so includes the symbols and a libgbm.so symlink is installed;
and both BR2_PACKAGE_HAS_{LIBGBM,LIBEGL_WAYLAND} are selected
accordingly.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Much like flutter-pi, this package is a Flutter embedder used to run Flutter
applications. However, unlike Flutter-pi, this package requires a Wayland
compositor to run, which flutter-pi does not support. Furthermore, flutter-pi
lacks several plugins and features that ivi-homescreen supports, such as:
- Dart VM console redirection
- DLT logging
- Accessibility
- Compositor region
- Compositor surface
- Desktop Window
- Go Router
- Isolate
- Keyboard Manager
- Layer Playground
- Mouse Cursor
- PackageInfo
- Platform
- Platform Views
- Restoration
The following plugins and options are hardcoded to off:
- Crash handler: Requires a newer version of sentry-native.
- File selector: Requires the zenity package.
- Firebase-core: Requires the firebase-cpp-sdk package.
- URL Launcher: Requires a runtime-dependency on xdg-open.
- BUILD_TEXTURE_NAVI_RENDER_EGL: Failes to build.
- BUILD_TEXTURE_TEST_EGL: Fails to build.
- ENABLE_AGL_CLIENT: Used for Automitve Grade Linux (AGL).
The ENABLE_XDG_CLIENT=ON option is a requirement to run Flutter apps.
If this option is disabled, ivi-homescreen segfaults when starting an
application.
Finally, there is a need for a patch that fixes the audio-players plugin:
If the audio-players plugin is the only plugin selected, several compilation
errors occure because of undeclared definitions, as the standard_method_codec.h
header file is missing.
Upstream-status: https://github.com/toyota-connected/ivi-homescreen/pull/133
This package has been tested on a x86_64 host with an AMD Ryzen 9 6900HS
with Docker 24.0.5:
- The following distributions:
- Fedora 39: Host system
- Ubuntu 22.04: Docker
- Debian 11: Docker
- The following targets:
- BR2_aarch64
- BR2_arm
- BR2_x86_64
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure on sparc64 raised since bump to version
0.85 in commit 470f0fb1ec:
error[E0308]: mismatched types
--> /home/autobuild/autobuild/instance-7/output-1/build/nushell-0.85.0/VENDOR/uucore/src/lib/features/fs.rs:121:16
|
111 | pub fn number_of_links(&self) -> u64 {
| --- expected `u64` because of return type
...
121 | return self.0.st_nlink;
| ^^^^^^^^^^^^^^^ expected `u64`, found `u32`
|
help: you can convert a `u32` to a `u64`
|
121 | return self.0.st_nlink.into();
| +++++++
For more information about this error, try `rustc --explain E0308`.
error: could not compile `uucore` (lib) due to previous error
Fixes:
- http://autobuild.buildroot.org/results/f9f0287a8e39c65895014ca513ed25071f020add
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (not needed anymore)
- Switch to meson-package
- libabseil-cpp is a mandatory dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
imxrt1050-evk was using uImage switch to using zImage
now.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.7 and U-Boot to 2024.01
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While updating ARC GNU toolchain version (see [1]) we unintentionally
got rid of "0001-poison-system-directories.patch" which still makes
sense.
Even though one may think that we do not need these Binutils patches
because we do "poisoning" of system directories in toolchain wrapper,
but these wrappers don't exist for tools originated from Binutils, only
for gcc, g++ etc.
So we need to keep that patch still, sorry.
[1] https://git.buildroot.net/buildroot/commit/?id=045ab73702b8bc09f94ca1f3b8e5bf3acb0b0843
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure raised since the addition of the package
in commit ea45b95c0e:
/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py:40: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html
import pkg_resources
Traceback (most recent call last):
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 289, in <module>
if check_linker_need_libatomic():
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/build/python-grpcio-1.60.0/setup.py", line 223, in check_linker_need_libatomic
cpp_test = subprocess.Popen(
^^^^^^^^^^^^^^^^^
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1026, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/home/autobuild/autobuild/instance-12/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/lib/python3.11/subprocess.py", line 1950, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'no'
Fixes:
- http://autobuild.buildroot.org/results/58ac25b4e426712269c5fc144121c955b714c760
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
