Configuring the network interface with DHCP via
/etc/network/interfaces generally does not work when NFS booting. The
DHCP configuration will initially bring the interface down and system
then hangs at that point as the root filesystem is no longer
accessable.
This adds a script to be run via a pre-up line in
/etc/network/interfaces. It checks for a NFS root filesystem and if
the interface to be configured is used for access to the NFS server.
If this is the case, then it returns a failure code so that ifup will
not configure the interface. This works for DHCP and another config
methods (static, bootp, etc.). This system does detect if the
interface to be configured isn't the one used for NFS and doesn't skip
it when that is the case.
NFS filesystems that aren't the root fs aren't considered.
Fixes bug #4790.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The QEMU configure script incorrectly assumes SSP is supported by the
toolchain in some cases where the compiler accepts -fstack-protector*
flags but the C library does not provide the necessary __stack_chk_*()
functions.
Even though a full compile and link test is performed by the script,
this is done with a code fragment which does not actually meet any of
the conditions required to cause the compiler to emit canary code when
the -fstack-protector-strong variant is used. As no compile or link
failure occurs in this case, a false positive is generated and a
subsequent error is seen when the probe for pthreads is performed.
The fix consists in patching the configure script to use a more
appropriate test program for the SSP support checks.
Fixes:
http://autobuild.buildroot.net/results/efb/efbb4e940543894b8745bb405478a096c90a5ae2/http://autobuild.buildroot.net/results/32d/32d6d984febad2dee1f0d31c5fa0aea823297096/http://autobuild.buildroot.net/results/aa6/aa6e71c957fb6f07e7bded35a8e47be4dadd042c/
...and many others.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Created a readme.txt for the Intel Galileo Gen 1/2 that describes,
* How to build for the Intel Galileo Gen 1/2
* How to access the console on the Intel Galileo Gen 1/2
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In all other package the condition for BR2_PACKAGE_LIBGUDEV selection is
BR2_INIT_SYSTEMD. Do the same for udisks.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the case of adding libgudev as a dependency more consistent with all
other dependency packages. The <pkg>_DEPENDENCIES variable sets the build
order which is conceptually independent of the underlying reason for that
dependency.
Also, remove the comments in hidapi.mk and udisks.mk. These comments explain
why BR2_PACKAGE_LIBGUDEV is selected, so the comments in corresponding
Config.in files are enough.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Board support package includes:
* Toplevel build root configuration
* Github based 3.8.7 Kernel
* Upstream 3.8.7
* Linux 3.8.7 Kernel Driver Patches
* Linux 3.8.7 configuration
* Grub configuration
* Init Script to load modules
* genimage config to create sdcard image.
[Thomas: simplify post-image script since there is now only one call
to genimage.]
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Packages built with automake use a `py-compile` helper to byte-compile
Python source files. This script uses the "py_compile" module from the
standard library. In turn, the compile() function in the "py_compile"
module invokes the cache_from_source() function provided by importlib.
This commit adds a new patch named "020-importlib-no-pep3147.patch"
that changes cache_from_source() and source_from_cache() in importlib
to get rid of the "__pycache__" directory.
This commit fixes the following import error in kmod when the module
is built for Python 3:
>>> from kmod import Kmod
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: cannot import name 'Kmod'
Moreover, this commit removes two patches that are no longer necessary
since modifying cache_from_source() and source_from_cache() disables
PEP 3147 for the standard library and distutils / setuptools.
* 004-old-stdlib-cache.patch
* 016-distutils-no-pep3147.patch
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
/etc/inputrc is configuration file for readline. However, until now, it
was provided by skeleton. This patch install /etc/inputrc from readline
recipe.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of using a patch to specify the architecture variant for
sparc, use some Boost configure variables.
[Thomas: reword commit log.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
/etc/issue is managed with BR2_TARGET_GENERIC_ISSUE. In case
BR2_TARGET_GENERIC_ISSUE is set (which is default), /etc/issue
is overwritten. In case BR2_TARGET_GENERIC_ISSUE is not set,
we don't want /etc/issue exist.
Finaly, remove /etc/issue from skeleton.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- use BR2_INIT_SYSTEMD instead of BR2_PACKAGE_SYSTEMD for the
libgudev handling. This is consistent with what we do in libmbim,
modem-manager and network-manager. Only udisks is diverging from
this by using BR2_PACKAGE_SYSTEMD.
- Fix the license info: it is GPLv3 *or* BSD-3c *or* the specific
HIDAPI license. Added LICENSE-orig.txt to LICENSE_FILES.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It contained a typo that prevented the driver from being built.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that uclibc-ng was bumped to version 1.0.9 nothing prevents x86
from working correctly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're unable to build liquid-dsp successfully resulting in an internal
compiler error. Fixes:
http://autobuild.buildroot.net/results/2ac/2acd745f4e5ec6edfd09afcd57b9ece216724c1b/
[Thomas: propagate the dependencies to the comment.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently Qt 5.5 only detects and build the eglfs_mali device
integration if the commercial Mali driver package from ARM is used.
This patch makes sure the Qt configure script also test for the
sunxi-mali driver package. It also removes the dependency of
the proprietary fbdev_window.h.
This issue is set to be fixed in upcoming Qt 5.6:
https://codereview.qt-project.org/#/c/125837/
[Thomas: renumber patch from 0010 to 0009.]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Tested-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: build tested before the patch, verified that indeed the
eglfs-mali plugin doesn't get built, and that after the patch it gets
built as expected.]
This commit adds a patch to pulseaudio (already submitted upstream)
that avoids a structure redefinition build failure that occurs with
old gcc versions.
Fixes:
http://autobuild.buildroot.org/results/a1e/a1e7e59f9c65a6ce38800439c78b7808048ad708/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Trying to build anything at patch time will result in a broken
legal-info, as the needed host dependencies are not yet built.
Make that hook a pre-configure hook rather than a post-extract
hook.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To build libcurl, we need to override LD_LIBRARY and force it to a sane
value, otherwise libcurl is confused when target == host (see a51ce319,
libcurl: fix configure with openssl when target == host).
That is currently OK, since we always set LD_LIBRARY_PATH to a non-empty
value.
However, we're soon to stop setting it at all.
So, if the user has an empty (or no) LD_LIBRARY_PATH in his envirnment,
we'd end up adding the current working directory to LD_LIBRARY_PATH (as
an empty entry in a colon-separated list is most probably interpreted as
meaning the current working directory, which we do know can cause issue,
and which we expressely check against in support/dependencies/dependencies.sh
Fix that by only using an existing LD_LIBRARY_PATH if it is not empty.
Also use a Makefile construct as it is easier to read than a shell one
(we can do that, as all variables from the environment are available as
make variables).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It does not build, and no one depends on it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To build the host-mysql, we only build parts of the source, just the
strictly minimum required to then cross-compile it.
However, the host variables (conf opts, build and install cmds) are only
defined when the mysql server is enabled in the configuration.
So, this breaks:
make defconfig; make host-mysql
Even though it is not much use to have that partial host-mysql on its
own, it is still very interesting to be able to build it, if at least
for testing changes in the core package infrastructures (like new step
hooks or the likes...)
Move the definitions of the host variant out of the server conditional
block.
[Peter: add comment about what we build and why as suggested by Arnout]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marcelo Gutiérrez(UTN/FRH) <kuyurix@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mkfs.axfs uses zlib, but does not have an rpath to our host dir.
That's because:
- we're not passing our host CFLAGS or LDFLAGS
- it is forcibly setting CFLAGS in the Makefile, overriding anything
specified by the user
- it is not using LDFLAGS at all
Add two patches so that CFLAGS and LDFLAGS from the environment are
used if present.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a series file exists, we should use every file mentioned in it,
not just the ones ending with .patch or .diff. Also, there's no need
to uncompress anything if it's mentioned in a series file (the tools
that manipulate series files don't support compressed patches).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Doug Kehn <rdkehn@yahoo.com>
Tested-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These were forgotten when the subarches were added in cd88e49.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Alvaro Gamez <alvaro.gamez@hazent.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building with -mtune=e6500 led to build failures in glibc (probably in
uclibc as well) because gcc was built for a 32-bit target even though
the target tuple is powerpc64-*. This lead to a mix of 32-bit and
64-bit support and build errors like:
fatal error: gnu/lib-names-32.h: No such file or directory
The root cause is that the configure script is not handling e6500
correctly, because of stupid typo in the condition.
Change has been submitted upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Alvaro Gamez <alvaro.gamez@hazent.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARC is supported by uClibc-ng, cleanup old code.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a fanotify include bug where old kernels (2.6.x) fail to build.
Fixes recent failures on x86 with Linux 4.3.x kernel regarding
network sockets. Includes the removed patch.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force to use internal libatomic_ops of gauche, since the external
libatomic_ops packaged in Buildroot is not compatible with gauche.
Fixes:
http://autobuild.buildroot.org/results/a97/a979f6a58f0fbb1896830461d6c384f4a65c9429/
[Thomas: tweak commit log.]
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is ported from bdwgc package. Since Gauche uses an internal
copy of the boehm gc code, it is affected by the same problem.
Both configure and configure.ac are modified because autoreconf fails
due to an incompatibility with the version of the autotools used by
Buildroot.
Fixes:
http://autobuild.buildroot.org/results/8c6/8c6ce526735a36b8c8b4c6047e3c69039c4527cb/http://autobuild.buildroot.org/results/894/89460829a737a4dab19103f7a46905636420b0a8/
[Thomas: adjust commit log and patch description.]
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, with the original patch bootcmd runs sdboot before loading uEnv.txt.
Consequently, if the user change modeboot, the user's defined content is updated
too late.
By loading uEnv.txt before 'run $modeboot' the correct boot mode is used instead
of default mode.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Acked-By: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost context module does not build on sparc, even if sparc is
advertised as a supported architecture by the boost documentation. So
let's disallow this module for the time being.
Fixes:
http://autobuild.buildroot.org/results/206/2060e6e31c4d739947097faf6587e0a06681fee2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-8023 - authentication bypass vulnerability in the eap-mschapv2
plugin that was caused by insufficient verification of the internal
state when handling EAP-MSCHAPv2 Success messages received by the
client.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcap neds headers >= 3.0, so propagate that down to fastd which
selects libcap.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexander Dahl <post@lespocky.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
