Changelog (see [1] for details):
- Added support when active framebuffer is not starting at offset 0
- Fixed broken re-ordering of colors, rgba to argb
- Fixed broken path for man page
[1] http://fbgrab.monells.se
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust pulseview/libsigrok for the gcc >= 4.8 dependency.
Line wrap comment depends for pulseview.
Drop redundant libsigrok depend on comment for libsigrok++.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (see [1] for details):
Only a small fix, the suggested hwdb entry that the touchpad-edge-detector
printed used the wrong codes for ABS_X and ABS_Y. Fixed with this release,
the output is now suitable for copy/paste into the udev hwdb.
[1] http://lists.freedesktop.org/archives/input-tools/2015-November/001227.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
png_set_PLTE/png_get_PLTE functions failed to check for
an out-of-range palette when reading or writing PNG files with a bit_depth
less than 8.
CVE not yet assigned.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script uses pkg-config to find the optional dependencies, so
make sure it is present:
checking pkg-config is at least version 0.9.0... yes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With SD, USB and PCI-E variants available for several chips,
bus-prefixed entries get mis-aligned badly.
Rearrange them to use bus-suffixes instead.
Config options and the files themselves remain bus-prefixed.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Firmware blobs for Marvell WiFi-Ex 8797, 8887, 8897 were already
there in linux-firmware tree but relevant options were not in Config.in.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a potential heap corruption on Windows when
mbedtls_x509_crt_parse_path() is passed a path longer than 2GB. This
cannot be triggered remotely. Found by Guido Vranken, Intelworks.
Fixes a potential buffer overflow in some asn1_write_xxx() functions.
This cannot be triggered remotely unless you create X.509 certificates
based on untrusted input or write keys of untrusted origin. Found by
Guido Vranken, Intelworks.
The X509 max_pathlen constraint was not enforced on intermediate
certificates. Found by Nicholas Wilson, and fix and tests provided by
Janos Follath.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped
mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer
qemu versions.
sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000
driver which works fine.
x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc
(any variant) based toolchains.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.3 2.3.0 YES OK
arm_nuri 3.10.93 2.3.0 NO(1) OK(2)
arm_versatile 4.3 2.3.0 YES OK
arm_vexpress 4.3 2.3.0 YES OK
microblazebe 4.3 2.3.0 YES OK
microblazeel 4.3 2.3.0 YES OK
mips64el_malta 4.3 2.3.0 YES OK
mips64_malta 4.3 2.3.0 YES OK
mipsel_malta 4.3 2.3.0 YES OK
mips_malta 4.3 2.3.0 YES OK
ppc_g3beige 4.3 2.3.0 YES OK
ppc_mpc8544ds 4.3 2.3.0 YES OK
ppc_virtex_ml507 4.3 2.3.0 NO OK
ppc64_pseries 4.3 2.3.0 YES OK
sh4 4.3 2.3.0 YES OK
sh4eb 4.3 2.3.0 NO(1) OK
sparc_ss10 4.3 2.3.0 YES OK
sparc64_sun4u 4.3 2.3.0 YES OK
sparc_sun4u 4.3 2.3.0 YES OK
x86 4.2.6 2.3.0 YES OK(3)
x86_64 4.3 2.3.0 YES OK
xtensa_lx60 4.3 2.3.0 YES OK
(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was causing unexpected HTTP requests by the setup.py script for
python-protobuf. These "dependencies" aren't actually required for a successful
build, and are not staged into the target install directory.
Fixes:
http://autobuild.buildroot.org/results/e44/e44694f30e39266491a1040e284e504d6d37ef9e/
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To export a variable in .bashrc we shouldn't put a '$' at the
beginning of the line, and there must be a '=' between key and value.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg was already marked as not available for the NIOS2 Sourcery
toolchains, but it could still be built with the internal toolchain
backend or a custom external toolchain.
However, an inspection of the latest glibc source code indicates that
FE_INVALID, FE_OVERFLOW and FE_UNDERFLOW and indeed not available in
the nios2 variant of <fenv.h>.
Consequently, this patch makes ffmpeg not available on nios2, which
allows to simplify a bit the dependencies.
It propagates this dependency to:
- minidlna (and at the same time makes sure the minidlna comment is
not displayed on nios2, which wasn't properly taken into account
until now)
- mpd
- opencv
- opencv3
- squeezelite
- tovid
Even if it selects ffmpeg, Kodi does not need an update since Kodi is
only available on a limited number of architectures (which don't
include nios2, obviously). Other packages only make use of ffmpeg when
available.
Fixes:
http://autobuild.buildroot.org/results/921/9212f5a6432c5e695ac0630695405cea05e28610/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the patches since this is a major bump and they're no longer
relevant.
Introduce the new RRDTOOL_RRDGRAPH option, in previous versions the
graphing functionality was bundled with the stats/database backend,
however for newer versions this can be disabled.
Since it's normally expected functionality the default is yes, however
all of the buildroot rrd-using applications can work without this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump trinity version to 1.6. Remove backported vt.c missing include patch
as it is now included in the upstream release.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
