Update to use the latest kernel 3.5.4.
And also update to the latest .config knobs, otherwise we were just
building a mips(32) target which failed miserably.
This config is still flaky, you get a login prompt but usually fail to
login, passing along an init=/bin/sh helps some but crashes are quite
usual.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the qemu samples configs that used kernel 3.3.4 to 3.3.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Beautify and lock down kernel version to avoid future issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new powerpc-mpc8544ds sample qemu config.
Useful for SPE ABI testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This configuration provides a basic setup for using Buildroot
to create all of the images needed for a BeagleBone.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for Panda and PandaES, tested on both
platforms.
DEVTMPFS is enabled, to use static dev configuration one would need
to update the generic dev table for ttyO driver.
Panda is well supported in mainline kernel with omap2plus_defconfig,
so this should be safe.
U-boot SPL support is enabled by default as x-loader is now
deprecated.
With OMAP platforms u-boot,img format is prefered now, so it's enabled
by default as well. Also, on PandaBoard, the name of SPL target file
is MLO.
Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to use kernel version 3.2.16
Still keep sh4-r2d qemu sample config on 3.2 series since the sh-sci
driver from 3.3 uses unimplemented functionality (as of qemu 1.0.1)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Target a powerpc 750 rather than the incorrect 440fp to avoid issues and
for correctness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: also add to 9g0dfc]
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also switch documentation to use qemu-system-i386
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately kernel 3.3 doesn't seem to work properly at the moment.
So lock down headers to version 3.2.x and kernel to 3.2.12.
Tested on qemu 1.0.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Avnet S6LX9 Microboard is a small USB-Stick sized module
containing a Spartan6 FPGA capable of running the Microblaze
softcore processor together with RAM and FLASH memory.
This board support pachage assumes that the Microblaze Bitfile
available from the Avnet website is programmed into the FPGA.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the patch for kernel >= 3.3
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
at91sam9260_defconfig contains support for the EVM (since v3.2).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use git:// URLs for freescale git trees
- Enable hard fpu for A8
- Board uses uSD cards, so enable ext2 filesystem
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot config and Linux Kernel config.
Freescale binaries (xf86 video driver and multimedia codecs) not supported yet.
Signed-off-by: Mathieu Briand <mbriand@adeneo-embedded.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While upgrading the configs, it proved necessary to make more space on
the dataflash for u-boot since it grew because of relocation.
dataflash is then repartitionned to make more room for u-boot and a redundant
environment.
Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a new qemu_mips_malta sample configuration for big endian MIPS
testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update configuration to use kernel version 3.2
Also update the readme to use buildroot basedir as a reference for
kernel and rootfs like the other samples do.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The APF9328 is an i.MXL+FPGA based SOM (System On Module). Here only minimal
support is added: booting Linux kernel (UART, Ethernet and NOR), Buildroot
toolchain and JFFS2 rootfs.
[Peter: Remove redundant BR2_TARGET_OPTIMIZATION]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a new qemu sample config for the SPARC architecture.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh4-r2d has a serial port, however it's the second SH UART that's
emulated by Qemu so we need to adjust the kernel configuration for it to
see the relevant UART and adjust the qemu command line for it too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mini2440 has been supported in the mainline kernel since early 2009,
so use that instead of a custom tarball.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump kernel versions of qemu/mips-malta and qemu/arm-versatile sample
configuration files to 2.6.38.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This way we'll get something in images/ by default, and hopefully people
will be less likely to try to use target/ directly.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's pretty uncommon to use ext2fs on embedded systems, so don't enable
it by default.
Adjust defconfigs to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's really not very useful, all it does is install a target
strace and ldd in a target_utils directory in staging.
While at it clean up the strace makefile a bit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas:
* renamed sh4_defconfig to qemu_sh4_r2d_defconfig, for consistency
with other Qemu platforms supported
* renamed board/qemu/sh4 to board/qemu/sh4-r2d
* minor fixes in the readme.txt
* remove useless statements in the minimal defconfig
* switch to a fixed kernel version instead of "same as headers"
]
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Paul Jones documented at
http://pauljones.id.au/blog/2010/07/using-buildroot-on-a-mini2440/ how
to use Buildroot to generate a system for the FriendlyARM Mini2440
platform. This patch integrates Paul's work into Buildroot.
Unfortunately, the kernel being 2.6.32, we can't easily use a minimal
defconfig here. The mini2440 support has been merged into more recent
kernels, but I don't have the hardware to test.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This default configuration did not even build a kernel image, which is
the main point of having board default configuration. So remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Neither the kernel nor U-Boot have support for a 1005 board, so let's
get rid of this board configuration, the corresponding target
skeleton, kernel and busybox configuration and device table.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use recent U-Boot and kernel version, remove target skeleton and use
the default one instead, remove useless kernel configuration, busybox
configuration and device table.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It was supposed to be the support for AT91SAM9260 using a parallel flash
(instead of the usual dataflash). But the provided U-Boot configuration
at91sam9260pf.h was not used anywhere, and it was unsufficient to add
correct support in U-Boot (some changes in U-Boot Makefile would also be
needed). Additionnally, this configuration has not been merged into U-Boot
upstream since 2007 (when it was added to Buildroot).
Therefore, let's get rid of this configuration. If some users are
interested, we can re-introduce it properly with their help.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use recent U-Boot and kernel versions, remove useless kernel
configuration file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use recent U-Boot and kernel versions, remove useless kernel
configuration file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Minimize the board defconfig, remove custom busybox configuration,
custom kernel configuration (use the kernel defconfig instead), custom
device table and target skeleton. The only difference in the target
skeleton was the support of mdev and the usage of an automount
script. Instead of adding this in a board-specific way, we should
provide board-independent configuration options. There are already
patches contributed to add support for mdev.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Minimize atngw100_defconfig, remove atngw100-base_defconfig, and
remove the target skeleton and device table. Instead of having
complete copies of new target skeletons (making them hard to
maintain), we should just have a post-build script that
adds/removes/tweaks the existing target skeleton.
Moreover, most of the tweaks in this target skeleton were for specific
packages, but the policy now is that board defconfig should just build
a basic root filesystem with Busybox, and let the user select
whichever set of packages (s)he wants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Those are not associated with any specific hardware system (PC or
another i386 system). Moreover, the fact that those configurations
require the build of a JFFS2 filesystem, very uncommon on PC systems,
seems to indicate that those configurations are not really being used
today.
It would make more sense to have a qemu_i388_defconfig (building a
kernel with just the device drivers for Qemu) and possibly a
pc_i386_defconfig (building a kernel with many device drivers, and a
bootloader such as Grub or Grub 2).
We also remove the corresponding kernel configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
One config per board is enough.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use modern U-Boot and kernel versions, get rid of the now unused
kernel configuration file since we use the kernel defconfig instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use modern U-Boot and kernel versions, and get rid of the useless
kernel configuration file, since we now use the kernel defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use modern kernel and U-Boot versions, and get rid of the now useless
kernel configuration file since we use the kernel defconfig file
instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configuration cache shared between packages, while being in
principle a nice idea to speed-up the configuration of packages by
avoiding repetitive identical checks, turned out to be unreliable due
to the subtle differences between similar but not identical checks in
different packages. After spending some time trying to fix those, we
concluded that supporting the shared configuration cache is definitely
too hard and too unreliable, and that we'd better get rid of it
altogether.
This patch therefore removes the shared configuration cache
infrastructure and usage.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated on http://pcmcia-cs.sourceforge.net/: "The Linux pcmcia-cs
package is officially deprecated. It can only be used with 2.4 and
older kernels.".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch modifies current toolchain build sequence so that
NPTL enabled toolchain can be built. The new sequence works
well with linuxthreads as well.
It introduces a new pass for gcc cross compilation. The new
sequence is binutils->gcc-initial->linux-headers -> uclibc-configured
(some cheats to generate phony shared libc.so and libm.o)
-> gcc-intermediate(with shared lib support) -> uclibc -> gcc-final
I also added a new sample config arm_nptl_toolchain_defconfig which
builds the toolchain and busybox.
I have only tried it on arm. However it should work for other
architectures which support NPTL on uclibc e.g. mips, sh, x86, ppc, x86_64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Supporting multilib is much more than just passing --enable-multilib
to gcc. You have to actually build the C library several times (once
for each multilib variant you want to support in your toolchain), and
to pass MULTILIB_OPTIONS/MULTILIB_EXCEPTIONS values to gcc to let it
know the set of multilib variants you're interested in.
Since we'll probably never support multilib toolchains in Buildroot,
just get rid of this BR2_ENABLE_MULTILIB option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a very advanced option, and it seems, according to
http://choices.cs.uiuc.edu/exceptions.pdf that SJLJ exceptions aren't
really interesting.
Users really interested by this can always use the
BR2_EXTRA_GCC_CONFIG_OPTIONS is they want.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
