NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

board: simplify kb9202 board

Browse Source 
Minimize the board defconfig, remove custom busybox configuration,
custom kernel configuration (use the kernel defconfig instead), custom
device table and target skeleton. The only difference in the target
skeleton was the support of mdev and the usage of an automount
script. Instead of adding this in a board-specific way, we should
provide board-independent configuration options. There are already
patches contributed to add support for mdev.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit is contained in:
Thomas Petazzoni 2010-12-05 21:53:02 +01:00 committed by Peter Korsgaard
parent 9096556689
commit 630ba981a0
42 changed files with 8 additions and 3547 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

733
configs/kb9202_defconfig
View File

@ -1,732 +1,15 @@
#
# Automatically generated make config: don't edit
# Sun Jun 22 16:27:47 2008
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="0.10.0-svn"
# BR2_alpha is not set
# Architecture
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_s390 is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
BR2_arm920t=y
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM920T"
BR2_ARM_OABI=y
# BR2_ARM_EABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm920t"
#
# Target options
#
#
# Project Options
#
BR2_PROJECT="kb9202"
BR2_HOSTNAME="KB9202"
BR2_BANNER="Welcome to the KwikByte 9202"
#
# Preset Devices
#
# BR2_TARGET_ARMLTD is not set
# BR2_TARGET_ATMEL is not set
BR2_BOARD_NAME="kb9202"
BR2_AT91_LINUXPATCH_SITE="http://maxim.org.za/AT91RM9200/2.6"
BR2_BOARD_PATH="target/device/KwikByte/$(BR2_BOARD_NAME)"
# BR2_TARGET_SHARP is not set
BR2_TARGET_KWIKBYTE=y
#
# Board Selection
#
BR2_TARGET_KB9202=y
BR2_ARCH_AT91_2_6_24=y
BR2_KERNEL_ARCH_PATCH_VERSION="2.6.24"
BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-arm/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
#
# Generic Architecture support
#
BR2_TARGET_ARM=y
#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set
# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
#
# Build options
#
BR2_PRIMARY_SITE=""
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN="svn"
BR2_GIT="git"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
#
# Mirrors and Download locations
#
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
#
# Atmel Mirrors
#
BR2_STAGING_DIR="$(BASE_DIR)/staging"
# BR2_FPU_SUFFIX is not set
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_ROOTFS_PREFIX="rootfs"
BR2_JLEVEL=2
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_DEVFILES is not set
#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_4_25 is not set
# BR2_KERNEL_HEADERS_2_4_27 is not set
# BR2_KERNEL_HEADERS_2_4_29 is not set
# BR2_KERNEL_HEADERS_2_4_31 is not set
# BR2_KERNEL_HEADERS_2_6_9 is not set
# BR2_KERNEL_HEADERS_2_6_11 is not set
# BR2_KERNEL_HEADERS_2_6_12 is not set
# BR2_KERNEL_HEADERS_2_6_20_4 is not set
# BR2_KERNEL_HEADERS_2_6_20 is not set
# BR2_KERNEL_HEADERS_2_6_21_5 is not set
# BR2_KERNEL_HEADERS_2_6_21 is not set
# BR2_KERNEL_HEADERS_2_6_22_1 is not set
# BR2_KERNEL_HEADERS_2_6_22_10 is not set
# BR2_KERNEL_HEADERS_2_6_22 is not set
# BR2_KERNEL_HEADERS_2_6_23 is not set
BR2_KERNEL_HEADERS_2_6_24=y
# BR2_KERNEL_HEADERS_2_6_25 is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.24.7"
#
# uClibc Options
#
BR2_UCLIBC_VERSION_0_9_29=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.29.config"
# BR2_ENABLE_LOCALE is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_PTHREAD_DEBUG is not set
# BR2_PROGRAM_INVOCATION is not set
#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
BR2_BINUTILS_VERSION_2_18=y
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
BR2_BINUTILS_VERSION="2.18"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
#
# GCC Options
#
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_3 is not set
BR2_GCC_VERSION_4_2_4=y
# BR2_GCC_VERSION_4_3_1 is not set
# BR2_GCC_IS_SNAP is not set
BR2_GCC_SUPPORTS_SYSROOT=y
# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
BR2_GCC_VERSION="4.2.4"
BR2_TOOLCHAIN_SYSROOT=y
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
BR2_GCC_CROSS_CXX=y
# BR2_GCC_CROSS_FORTRAN is not set
BR2_INSTALL_LIBSTDCPP=y
# BR2_INSTALL_LIBGCJ is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
#
# Ccache Options
#
# BR2_CCACHE is not set
#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
#
# Common Toolchain Options
#
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
# BR2_LARGEFILE is not set
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
# BR2_USE_WCHAR is not set
BR2_SOFT_FLOAT=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
# BR2_BUSYBOX_VERSION_1_6_1 is not set
# BR2_BUSYBOX_VERSION_1_7_X is not set
# BR2_BUSYBOX_VERSION_1_8_X is not set
# BR2_BUSYBOX_VERSION_1_9_X is not set
BR2_BUSYBOX_VERSION_1_13_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.13.4"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_BASH is not set
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_DIFFUTILS is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_GREP is not set
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_PATCH is not set
#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_PCRE is not set
#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_BOOTUTILS is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_DASH is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LESS is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBFLOAT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_LTT is not set
# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
# BR2_PACKAGE_MODUTILS is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_PORTAGE is not set
# BR2_PACKAGE_PROCPS is not set
# BR2_PACKAGE_PSMISC is not set
# BR2_PACKAGE_RPM is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SQLITE is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_SYSKLOGD is not set
# BR2_PACKAGE_SYSVINIT is not set
# BR2_PACKAGE_TINYLOGIN is not set
# BR2_PACKAGE_UTIL-LINUX is not set
# BR2_PACKAGE_WHICH is not set
BR2_DATABASE_SUPPORT=y
# BR2_PACKAGE_MYSQL_CLIENT is not set
BR2_TEXTEDIT_SUPPORT=y
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set
# BR2_PACKAGE_VIM is not set
BR2_NETWORK_SUPPORT=y
#
# Networking applications
#
#
# argus - disabled (requires libpcap)
#
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BOA is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_CURL is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_DHCP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_IPERF is not set
# BR2_PACKAGE_IPROUTE2 is not set
#
# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
#
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MDNSRESPONDER is not set
# BR2_PACKAGE_MICROCOM is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETCAT is not set
# BR2_PACKAGE_NETKITBASE is not set
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_OPENVPN is not set
# BR2_PACKAGE_OPENSWAN is not set
#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
#
# quagga suite
#
# BR2_PACKAGE_QUAGGA_ZEBRA is not set
# BR2_PACKAGE_QUAGGA_BGPD is not set
# BR2_PACKAGE_QUAGGA_RIPD is not set
# BR2_PACKAGE_QUAGGA_RIPNGD is not set
# BR2_PACKAGE_QUAGGA_OSPFD is not set
# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
# BR2_PACKAGE_QUAGGA_ISISD is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
#
# vpnc - disabled (requires libgcrypt and libgpg_error)
#
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WGET is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
BR2_BLOCKDEV_SUPPORT=y
#
# dbus not available (need expat or libxml2)
#
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DM is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_E2FSPROGS is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HDPARM is not set
# BR2_PACKAGE_HOTPLUG is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS-3G is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_RAIDTOOLS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SFDISK is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_UDEV is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set
BR2_AUDIO_SUPPORT=y
# BR2_PACKAGE_ALSA_LIB is not set
#
# asterisk - disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
#
# libvorbis requires the package libogg to build
#
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_FESTIVAL is not set
BR2_GRAPHIC_SUPPORT=y
#
# text rendering libraries
#
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set
#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set
#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_SDL_MIXER is not set
# BR2_PACKAGE_SDL_TTF is not set
# BR2_PACKAGE_TIFF is not set
#
# busybox graphic applications
#
#
# --> (May be broken in busybox)
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set
#
# other GUIs
#
# BR2_PACKAGE_QTE is not set
# BR2_PACKAGE_QT is not set
BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_XSERVER_x11r7 is not set
# BR2_PACKAGE_XSERVER_xorg is not set
# BR2_PACKAGE_XSERVER_tinyx is not set
#
# X libraries and helper libraries
#
#
# atk - disabled (requires libglib2)
#
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBSEXY is not set
#
# fltk - disabled (requires Xorg(7))
#
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_WEBKIT is not set
#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set
#
# blackbox - disabled (requires Xorg(7))
#
#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set
#
# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
#
# BR2_PACKAGE_DOCKER is not set
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_LEAFPAD is not set
#
# midori - disabled (requires Xorg(7))
#
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set
# BR2_PACKAGE_XVKBD is not set
#
# Video libraries/codecs and applications
#
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_VLC is not set
BR2_COMPRESSOR_SUPPORT=y
# BR2_PACKAGE_GZIP is not set
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_LZMA is not set
# BR2_PACKAGE_LZMA_HOST is not set
# BR2_PACKAGE_ZLIB is not set
BR2_SCRIPTING_SUPPORT=y
#
# lua - disabled (requires readline and ncurses)
#
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set
BR2_XML_SUPPORT=y
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_XERCES is not set
BR2_JAVA_SUPPORT=y
# BR2_PACKAGE_CLASSPATH is not set
BR2_GAMES=y
# BR2_PACKAGE_LXDOOM is not set
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_XBOARD is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_VICE is not set
#
# Target filesystem options
#
#
# filesystem for target device
#
BR2_ROOTFS_DEVICE_TABLE="target/device/KwikByte/kb9202/device_table.txt"
BR2_ROOTFS_SKELETON_CUSTOM=y
BR2_ROOTFS_SKELETON_CUSTOM_PATH="target/device/KwikByte/kb9202/target_skeleton"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# Filesystem
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_GZIP is not set
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set
#
# bootloader for target device
#
# BR2_TARGET_UBOOT is not set
#
# Kernel
#
# BR2_KERNEL_none is not set
BR2_KERNEL_LINUX_ADVANCED=y
# BR2_KERNEL_LINUX is not set
BR2_PACKAGE_LINUX=y
BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX26_VERSION).config"
BR2_PACKAGE_LINUX_FORMAT="uImage"
BR2_KERNEL_CURRENT_VERSION="2.6.24.4"
BR2_KERNEL_NEXT_VERSION="2.6.25"
BR2_KERNEL_THIS_VERSION="2.6.24"
BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6/"
BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
# BR2_LINUX_2_6_STABLE is not set
BR2_LINUX_2_6_24=y
# BR2_LINUX_2_6_23 is not set
# BR2_LINUX_2_6_22_10 is not set
# BR2_LINUX_2_6_22_1 is not set
# BR2_LINUX_2_6_22 is not set
# BR2_LINUX_2_6_21_7 is not set
# BR2_LINUX_2_6_21_5 is not set
# BR2_LINUX_2_6_21 is not set
# BR2_LINUX_2_6_20 is not set
# BR2_LINUX_2_6_25 is not set
# BR2_LINUX26_CUSTOM is not set
#
# Patches
#
# BR2_KERNEL_ADD_KERNEL_ORG_PATCH is not set
# BR2_KERNEL_ADD_PATCH is not set
BR2_KERNEL_ARCH_PATCH_ENABLED=y
BR2_LINUX_BSP_PATCH=""
# BR2_KERNEL_PREPATCHED is not set
BR2_KERNEL_BASE=y
# BR2_KERNEL_LATEST is not set
BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
#
# Linux Kernel Configuration
#
BR2_PACKAGE_LINUX_USE_KCONFIG=y
# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
# BR2_MAKE_XCONFIG is not set
BR2_MAKE_MENUCONFIG=y
BR2_KERNEL_CONFIG_METHOD="menuconfig"
# BR2_LINUX_BIN_BZIMAGE is not set
BR2_LINUX_BIN_UIMAGE=y
# BR2_LINUX_BIN_VMLINUX is not set
# BR2_LINUX_BIN_ZIMAGE is not set
# BR2_LINUX_BIN_CUSTOM is not set
#
# Destinations for linux kernel binaries
#
# BR2_LINUX_COPYTO_ROOTFS is not set
# BR2_LINUX_COPYTO_TFTPBOOT is not set
BR2_LINUX_COPYTO=""
# BR2_LINUX_COPY_CONFIGURATION is not set
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.33"
BR2_LINUX_KERNEL_PATCH="http://maxim.org.za/AT91RM9200/2.6/2.6.33-at91.patch.gz"
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="kb9202"

829
target/device/KwikByte/kb9202/busybox.config
View File

@ -1,829 +0,0 @@
#
# Automatically generated make config: don't edit
# Busybox version: 1.10.3
# Wed Jun 18 14:08:22 2008
#
CONFIG_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
CONFIG_NITPICK=y
CONFIG_DESKTOP=y
CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
# CONFIG_FEATURE_COMPRESS_USAGE is not set
CONFIG_FEATURE_INSTALLER=y
# CONFIG_LOCALE_SUPPORT is not set
CONFIG_GETOPT_LONG=y
CONFIG_FEATURE_DEVPTS=y
CONFIG_FEATURE_CLEAN_UP=y
# CONFIG_FEATURE_PIDFILE is not set
CONFIG_FEATURE_SUID=y
# CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
# CONFIG_SELINUX is not set
# CONFIG_FEATURE_PREFER_APPLETS is not set
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
CONFIG_FEATURE_SYSLOG=y
# CONFIG_FEATURE_HAVE_RPC is not set
#
# Build Options
#
# CONFIG_STATIC is not set
# CONFIG_NOMMU is not set
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
# CONFIG_LFS is not set
#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_WERROR is not set
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set
CONFIG_INCLUDE_SUSv2=y
#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="/work/users/beattie/KB9202/buildroot/project_build_arm/kb9202/root"
#
# Busybox Library Tuning
#
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SIZE_VS_SPEED=2
# CONFIG_FEATURE_FAST_TOP is not set
# CONFIG_FEATURE_ETC_NETWORKS is not set
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
CONFIG_FEATURE_EDITING_VI=y
CONFIG_FEATURE_EDITING_HISTORY=999
CONFIG_FEATURE_EDITING_SAVEHISTORY=y
CONFIG_FEATURE_TAB_COMPLETION=y
# CONFIG_FEATURE_USERNAME_COMPLETION is not set
CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
CONFIG_FEATURE_COPYBUF_KB=4
CONFIG_MONOTONIC_SYSCALL=y
CONFIG_IOCTL_HEX2STR_ERROR=y
#
# Applets
#
#
# Archival Utilities
#
CONFIG_AR=y
# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
CONFIG_BUNZIP2=y
# CONFIG_BZIP2 is not set
CONFIG_CPIO=y
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
CONFIG_GUNZIP=y
# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
CONFIG_GZIP=y
# CONFIG_RPM2CPIO is not set
# CONFIG_RPM is not set
# CONFIG_FEATURE_RPM_BZ2 is not set
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_GZIP=y
CONFIG_FEATURE_TAR_BZIP2=y
CONFIG_FEATURE_TAR_LZMA=y
# CONFIG_FEATURE_TAR_COMPRESS is not set
# CONFIG_FEATURE_TAR_AUTODETECT is not set
CONFIG_FEATURE_TAR_FROM=y
# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_FEATURE_TAR_LONG_OPTIONS=y
# CONFIG_FEATURE_TAR_UNAME_GNAME is not set
# CONFIG_UNCOMPRESS is not set
CONFIG_UNLZMA=y
# CONFIG_FEATURE_LZMA_FAST is not set
CONFIG_UNZIP=y
#
# Common options for cpio and tar
#
# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
# CONFIG_FEATURE_DEB_TAR_GZ is not set
# CONFIG_FEATURE_DEB_TAR_BZ2 is not set
# CONFIG_FEATURE_DEB_TAR_LZMA is not set
#
# Coreutils
#
CONFIG_BASENAME=y
# CONFIG_CAL is not set
CONFIG_CAT=y
CONFIG_CATV=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_CHROOT=y
CONFIG_CKSUM=y
# CONFIG_COMM is not set
CONFIG_CP=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_DD=y
CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
CONFIG_FEATURE_DD_IBS_OBS=y
CONFIG_DF=y
# CONFIG_FEATURE_DF_INODE is not set
CONFIG_DIRNAME=y
CONFIG_DOS2UNIX=y
CONFIG_UNIX2DOS=y
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
# CONFIG_EXPAND is not set
# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set
CONFIG_EXPR=y
CONFIG_EXPR_MATH_SUPPORT_64=y
CONFIG_FALSE=y
CONFIG_FOLD=y
CONFIG_HEAD=y
CONFIG_FEATURE_FANCY_HEAD=y
CONFIG_HOSTID=y
CONFIG_ID=y
CONFIG_INSTALL=y
CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
CONFIG_LENGTH=y
CONFIG_LN=y
CONFIG_LOGNAME=y
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_MD5SUM=y
CONFIG_MKDIR=y
CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
CONFIG_MKFIFO=y
CONFIG_MKNOD=y
CONFIG_MV=y
CONFIG_FEATURE_MV_LONG_OPTIONS=y
CONFIG_NICE=y
CONFIG_NOHUP=y
CONFIG_OD=y
CONFIG_PRINTENV=y
CONFIG_PRINTF=y
CONFIG_PWD=y
CONFIG_READLINK=y
CONFIG_FEATURE_READLINK_FOLLOW=y
CONFIG_REALPATH=y
CONFIG_RM=y
CONFIG_RMDIR=y
# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
CONFIG_SEQ=y
CONFIG_SHA1SUM=y
CONFIG_SLEEP=y
# CONFIG_FEATURE_FANCY_SLEEP is not set
CONFIG_SORT=y
CONFIG_FEATURE_SORT_BIG=y
# CONFIG_SPLIT is not set
# CONFIG_FEATURE_SPLIT_FANCY is not set
# CONFIG_STAT is not set
# CONFIG_FEATURE_STAT_FORMAT is not set
CONFIG_STTY=y
# CONFIG_SUM is not set
CONFIG_SYNC=y
# CONFIG_TAC is not set
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TEST=y
CONFIG_FEATURE_TEST_64=y
CONFIG_TOUCH=y
CONFIG_TR=y
CONFIG_FEATURE_TR_CLASSES=y
CONFIG_FEATURE_TR_EQUIV=y
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
# CONFIG_UNEXPAND is not set
# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
CONFIG_UNIQ=y
CONFIG_USLEEP=y
CONFIG_UUDECODE=y
CONFIG_UUENCODE=y
CONFIG_WC=y
# CONFIG_FEATURE_WC_LARGE is not set
CONFIG_WHO=y
CONFIG_WHOAMI=y
CONFIG_YES=y
#
# Common options for cp and mv
#
CONFIG_FEATURE_PRESERVE_HARDLINKS=y
#
# Common options for ls, more and telnet
#
CONFIG_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y
#
# Common options for md5sum, sha1sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
#
# Console Utilities
#
CONFIG_CHVT=y
CONFIG_CLEAR=y
CONFIG_DEALLOCVT=y
CONFIG_DUMPKMAP=y
# CONFIG_KBD_MODE is not set
CONFIG_LOADFONT=y
CONFIG_LOADKMAP=y
CONFIG_OPENVT=y
CONFIG_RESET=y
CONFIG_RESIZE=y
CONFIG_FEATURE_RESIZE_PRINT=y
CONFIG_SETCONSOLE=y
# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
CONFIG_SETKEYCODES=y
CONFIG_SETLOGCONS=y
#
# Debian Utilities
#
CONFIG_MKTEMP=y
CONFIG_PIPE_PROGRESS=y
CONFIG_RUN_PARTS=y
CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
CONFIG_START_STOP_DAEMON=y
CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
CONFIG_WHICH=y
#
# Editors
#
CONFIG_AWK=y
CONFIG_FEATURE_AWK_MATH=y
CONFIG_CMP=y
CONFIG_DIFF=y
CONFIG_FEATURE_DIFF_BINARY=y
CONFIG_FEATURE_DIFF_DIR=y
# CONFIG_FEATURE_DIFF_MINIMAL is not set
# CONFIG_ED is not set
CONFIG_PATCH=y
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_MAX_LEN=4096
CONFIG_FEATURE_VI_8BIT=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
CONFIG_FEATURE_ALLOW_EXEC=y
#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_PRINT0=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_MMIN=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_MAXDEPTH=y
CONFIG_FEATURE_FIND_NEWER=y
# CONFIG_FEATURE_FIND_INUM is not set
CONFIG_FEATURE_FIND_EXEC=y
CONFIG_FEATURE_FIND_USER=y
CONFIG_FEATURE_FIND_GROUP=y
CONFIG_FEATURE_FIND_NOT=y
CONFIG_FEATURE_FIND_DEPTH=y
CONFIG_FEATURE_FIND_PAREN=y
CONFIG_FEATURE_FIND_SIZE=y
CONFIG_FEATURE_FIND_PRUNE=y
# CONFIG_FEATURE_FIND_DELETE is not set
CONFIG_FEATURE_FIND_PATH=y
CONFIG_FEATURE_FIND_REGEX=y
# CONFIG_FEATURE_FIND_CONTEXT is not set
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
#
# Init Utilities
#
CONFIG_INIT=y
# CONFIG_DEBUG_INIT is not set
CONFIG_FEATURE_USE_INITTAB=y
CONFIG_FEATURE_KILL_REMOVED=y
CONFIG_FEATURE_KILL_DELAY=0
CONFIG_FEATURE_INIT_SCTTY=y
CONFIG_FEATURE_INIT_SYSLOG=y
CONFIG_FEATURE_EXTRA_QUIET=y
# CONFIG_FEATURE_INIT_COREDUMPS is not set
CONFIG_FEATURE_INITRD=y
CONFIG_HALT=y
CONFIG_MESG=y
#
# Login/Password Management Utilities
#
CONFIG_FEATURE_SHADOWPASSWDS=y
# CONFIG_USE_BB_SHADOW is not set
# CONFIG_USE_BB_PWD_GRP is not set
CONFIG_ADDGROUP=y
# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set
CONFIG_DELGROUP=y
# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
# CONFIG_FEATURE_CHECK_NAMES is not set
CONFIG_ADDUSER=y
# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
CONFIG_DELUSER=y
CONFIG_GETTY=y
CONFIG_FEATURE_UTMP=y
CONFIG_FEATURE_WTMP=y
CONFIG_LOGIN=y
# CONFIG_PAM is not set
# CONFIG_LOGIN_SCRIPTS is not set
CONFIG_FEATURE_NOLOGIN=y
CONFIG_FEATURE_SECURETTY=y
CONFIG_PASSWD=y
CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
# CONFIG_CRYPTPW is not set
# CONFIG_CHPASSWD is not set
CONFIG_SU=y
CONFIG_FEATURE_SU_SYSLOG=y
CONFIG_FEATURE_SU_CHECKS_SHELLS=y
CONFIG_SULOGIN=y
CONFIG_VLOCK=y
#
# Linux Ext2 FS Progs
#
CONFIG_CHATTR=y
CONFIG_FSCK=y
CONFIG_LSATTR=y
#
# Linux Module Utilities
#
CONFIG_INSMOD=y
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
CONFIG_FEATURE_INSMOD_LOAD_MAP=y
CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
CONFIG_RMMOD=y
CONFIG_LSMOD=y
CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
CONFIG_MODPROBE=y
CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
#
# Options common to multiple modutils
#
CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
# CONFIG_FEATURE_2_4_MODULES is not set
CONFIG_FEATURE_2_6_MODULES=y
# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
#
# Linux System Utilities
#
CONFIG_DMESG=y
CONFIG_FEATURE_DMESG_PRETTY=y
# CONFIG_FBSET is not set
# CONFIG_FEATURE_FBSET_FANCY is not set
# CONFIG_FEATURE_FBSET_READMODE is not set
CONFIG_FDFLUSH=y
CONFIG_FDFORMAT=y
# CONFIG_FDISK is not set
# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
# CONFIG_FEATURE_FDISK_WRITABLE is not set
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
# CONFIG_FEATURE_FDISK_ADVANCED is not set
# CONFIG_FINDFS is not set
CONFIG_FREERAMDISK=y
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_FEATURE_MINIX2 is not set
CONFIG_GETOPT=y
CONFIG_HEXDUMP=y
# CONFIG_FEATURE_HEXDUMP_REVERSE is not set
# CONFIG_HD is not set
CONFIG_HWCLOCK=y
CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
CONFIG_IPCRM=y
CONFIG_IPCS=y
CONFIG_LOSETUP=y
CONFIG_MDEV=y
CONFIG_FEATURE_MDEV_CONF=y
# CONFIG_FEATURE_MDEV_RENAME is not set
CONFIG_FEATURE_MDEV_EXEC=y
# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set
CONFIG_MKSWAP=y
# CONFIG_FEATURE_MKSWAP_V0 is not set
CONFIG_MORE=y
CONFIG_FEATURE_USE_TERMIOS=y
# CONFIG_VOLUMEID is not set
# CONFIG_FEATURE_VOLUMEID_EXT is not set
# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
# CONFIG_FEATURE_VOLUMEID_FAT is not set
# CONFIG_FEATURE_VOLUMEID_HFS is not set
# CONFIG_FEATURE_VOLUMEID_JFS is not set
# CONFIG_FEATURE_VOLUMEID_XFS is not set
# CONFIG_FEATURE_VOLUMEID_NTFS is not set
# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set
# CONFIG_FEATURE_VOLUMEID_UDF is not set
# CONFIG_FEATURE_VOLUMEID_LUKS is not set
# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
# CONFIG_FEATURE_VOLUMEID_SYSV is not set
# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set
CONFIG_MOUNT=y
# CONFIG_FEATURE_MOUNT_FAKE is not set
# CONFIG_FEATURE_MOUNT_VERBOSE is not set
# CONFIG_FEATURE_MOUNT_HELPERS is not set
# CONFIG_FEATURE_MOUNT_LABEL is not set
# CONFIG_FEATURE_MOUNT_NFS is not set
CONFIG_FEATURE_MOUNT_CIFS=y
CONFIG_FEATURE_MOUNT_FLAGS=y
CONFIG_FEATURE_MOUNT_FSTAB=y
CONFIG_PIVOT_ROOT=y
CONFIG_RDATE=y
CONFIG_READPROFILE=y
# CONFIG_RTCWAKE is not set
CONFIG_SETARCH=y
CONFIG_SWAPONOFF=y
CONFIG_SWITCH_ROOT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_UMOUNT_ALL=y
#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
# CONFIG_FEATURE_MTAB_SUPPORT is not set
#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
# CONFIG_BBCONFIG is not set
# CONFIG_CHAT is not set
# CONFIG_FEATURE_CHAT_NOFAIL is not set
# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set
# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
CONFIG_CHRT=y
CONFIG_CROND=y
CONFIG_DEBUG_CROND_OPTION=y
# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
CONFIG_CRONTAB=y
CONFIG_DC=y
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
CONFIG_EJECT=y
# CONFIG_FEATURE_EJECT_SCSI is not set
CONFIG_LAST=y
CONFIG_LESS=y
CONFIG_FEATURE_LESS_MAXLINES=9999999
CONFIG_FEATURE_LESS_BRACKETS=y
CONFIG_FEATURE_LESS_FLAGS=y
CONFIG_FEATURE_LESS_FLAGCS=y
# CONFIG_FEATURE_LESS_MARKS is not set
CONFIG_FEATURE_LESS_REGEXP=y
CONFIG_HDPARM=y
CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
CONFIG_MAKEDEVS=y
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
CONFIG_FEATURE_MAKEDEVS_TABLE=y
# CONFIG_MICROCOM is not set
CONFIG_MOUNTPOINT=y
CONFIG_MT=y
# CONFIG_RAIDAUTORUN is not set
# CONFIG_READAHEAD is not set
CONFIG_RUNLEVEL=y
# CONFIG_RX is not set
# CONFIG_SCRIPT is not set
CONFIG_STRINGS=y
CONFIG_SETSID=y
# CONFIG_TASKSET is not set
# CONFIG_FEATURE_TASKSET_FANCY is not set
CONFIG_TIME=y
# CONFIG_TTYSIZE is not set
CONFIG_WATCHDOG=y
#
# Networking Utilities
#
# CONFIG_FEATURE_IPV6 is not set
# CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set
CONFIG_VERBOSE_RESOLUTION_ERRORS=y
# CONFIG_ARP is not set
CONFIG_ARPING=y
# CONFIG_BRCTL is not set
# CONFIG_FEATURE_BRCTL_FANCY is not set
CONFIG_DNSD=y
CONFIG_ETHER_WAKE=y
# CONFIG_FAKEIDENTD is not set
# CONFIG_FTPGET is not set
# CONFIG_FTPPUT is not set
# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
CONFIG_HOSTNAME=y
# CONFIG_HTTPD is not set
# CONFIG_FEATURE_HTTPD_RANGES is not set
# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
# CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP is not set
# CONFIG_FEATURE_HTTPD_SETUID is not set
# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
# CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES is not set
# CONFIG_FEATURE_HTTPD_CGI is not set
# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
# CONFIG_FEATURE_HTTPD_PROXY is not set
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
CONFIG_FEATURE_IFCONFIG_SLIP=y
CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
CONFIG_FEATURE_IFCONFIG_HW=y
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFENSLAVE is not set
CONFIG_IFUPDOWN=y
CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
CONFIG_FEATURE_IFUPDOWN_IP=y
# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
CONFIG_FEATURE_IFUPDOWN_IPV4=y
# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
CONFIG_FEATURE_IFUPDOWN_MAPPING=y
# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
# CONFIG_FEATURE_INETD_RPC is not set
CONFIG_IP=y
CONFIG_FEATURE_IP_ADDRESS=y
CONFIG_FEATURE_IP_LINK=y
CONFIG_FEATURE_IP_ROUTE=y
CONFIG_FEATURE_IP_TUNNEL=y
CONFIG_FEATURE_IP_RULE=y
CONFIG_FEATURE_IP_SHORT_FORMS=y
# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
CONFIG_IPADDR=y
CONFIG_IPLINK=y
CONFIG_IPROUTE=y
CONFIG_IPTUNNEL=y
CONFIG_IPRULE=y
# CONFIG_IPCALC is not set
# CONFIG_FEATURE_IPCALC_FANCY is not set
# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
CONFIG_NAMEIF=y
# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
# CONFIG_NC is not set
# CONFIG_NC_SERVER is not set
# CONFIG_NC_EXTRA is not set
CONFIG_NETSTAT=y
# CONFIG_FEATURE_NETSTAT_WIDE is not set
CONFIG_NSLOOKUP=y
CONFIG_PING=y
# CONFIG_PING6 is not set
CONFIG_FEATURE_FANCY_PING=y
# CONFIG_PSCAN is not set
CONFIG_ROUTE=y
# CONFIG_SENDMAIL is not set
# CONFIG_FETCHMAIL is not set
# CONFIG_SLATTACH is not set
CONFIG_TELNET=y
CONFIG_FEATURE_TELNET_TTYPE=y
CONFIG_FEATURE_TELNET_AUTOLOGIN=y
# CONFIG_TELNETD is not set
# CONFIG_FEATURE_TELNETD_STANDALONE is not set
CONFIG_TFTP=y
# CONFIG_TFTPD is not set
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
CONFIG_FEATURE_TFTP_BLOCKSIZE=y
# CONFIG_DEBUG_TFTP is not set
CONFIG_TRACEROUTE=y
CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE=y
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
CONFIG_APP_UDHCPD=y
CONFIG_APP_DHCPRELAY=y
CONFIG_APP_DUMPLEASES=y
# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases"
CONFIG_APP_UDHCPC=y
CONFIG_FEATURE_UDHCPC_ARPING=y
# CONFIG_FEATURE_UDHCP_PORT is not set
# CONFIG_FEATURE_UDHCP_DEBUG is not set
# CONFIG_FEATURE_RFC3397 is not set
CONFIG_DHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
CONFIG_VCONFIG=y
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
# CONFIG_ZCIP is not set
# CONFIG_TCPSVD is not set
# CONFIG_UDPSVD is not set
#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_FUSER=y
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_KILLALL5=y
# CONFIG_NMETER is not set
# CONFIG_PGREP is not set
CONFIG_PIDOF=y
CONFIG_FEATURE_PIDOF_SINGLE=y
CONFIG_FEATURE_PIDOF_OMIT=y
# CONFIG_PKILL is not set
CONFIG_PS=y
CONFIG_FEATURE_PS_WIDE=y
# CONFIG_FEATURE_PS_TIME is not set
# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
CONFIG_RENICE=y
CONFIG_BB_SYSCTL=y
CONFIG_TOP=y
CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
# CONFIG_FEATURE_TOP_DECIMALS is not set
# CONFIG_FEATURE_TOPMEM is not set
CONFIG_UPTIME=y
CONFIG_WATCH=y
#
# Shells
#
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_MSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_ASH=y
#
# Ash Shell Options
#
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_READ_NCHARS=y
CONFIG_ASH_READ_TIMEOUT=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_MATH_SUPPORT=y
CONFIG_ASH_MATH_SUPPORT_64=y
# CONFIG_ASH_GETOPTS is not set
CONFIG_ASH_BUILTIN_ECHO=y
CONFIG_ASH_BUILTIN_TEST=y
CONFIG_ASH_CMDCMD=y
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
CONFIG_ASH_RANDOM_SUPPORT=y
CONFIG_ASH_EXPAND_PRMT=y
# CONFIG_HUSH is not set
# CONFIG_HUSH_HELP is not set
# CONFIG_HUSH_INTERACTIVE is not set
# CONFIG_HUSH_JOB is not set
# CONFIG_HUSH_TICK is not set
# CONFIG_HUSH_IF is not set
# CONFIG_HUSH_LOOPS is not set
# CONFIG_LASH is not set
# CONFIG_MSH is not set
#
# Bourne Shell Options
#
CONFIG_FEATURE_SH_EXTRA_QUIET=y
# CONFIG_FEATURE_SH_STANDALONE is not set
# CONFIG_CTTYHACK is not set
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
# CONFIG_FEATURE_SYSLOGD_DUP is not set
# CONFIG_FEATURE_IPC_SYSLOG is not set
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
# CONFIG_LOGREAD is not set
# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
CONFIG_KLOGD=y
CONFIG_LOGGER=y
#
# Runit Utilities
#
# CONFIG_RUNSV is not set
# CONFIG_RUNSVDIR is not set
# CONFIG_SV is not set
# CONFIG_SVLOGD is not set
# CONFIG_CHPST is not set
# CONFIG_SETUIDGID is not set
# CONFIG_ENVUIDGID is not set
# CONFIG_ENVDIR is not set
# CONFIG_SOFTLIMIT is not set
# CONFIG_CHCON is not set
# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
# CONFIG_GETENFORCE is not set
# CONFIG_GETSEBOOL is not set
# CONFIG_LOAD_POLICY is not set
# CONFIG_MATCHPATHCON is not set
# CONFIG_RESTORECON is not set
# CONFIG_RUNCON is not set
# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
# CONFIG_SELINUXENABLED is not set
# CONFIG_SETENFORCE is not set
# CONFIG_SETFILES is not set
# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
# CONFIG_SETSEBOOL is not set
# CONFIG_SESTATUS is not set
#
# Print Utilities
#
# CONFIG_LPD is not set
# CONFIG_LPR is not set
# CONFIG_LPQ is not set

164
target/device/KwikByte/kb9202/device_table.txt
View File

@ -1,164 +0,0 @@
# When building a target filesystem, it is desirable to not have to
# become root and then run 'mknod' a thousand times. Using a device
# table you can create device nodes and directories "on the fly".
#
# This is a sample device table file for use with genext2fs. You can
# do all sorts of interesting things with a device table file. For
# example, if you want to adjust the permissions on a particular file
# you can just add an entry like:
# /sbin/foobar f 2755 0 0 - - - - -
# and (assuming the file /sbin/foobar exists) it will be made setuid
# root (regardless of what its permissions are on the host filesystem.
# Furthermore, you can use a single table entry to create a many device
# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
# I could just use the following two table entries:
# /dev/hda b 640 0 0 3 0 0 0 -
# /dev/hda b 640 0 0 3 1 1 1 15
#
# Device table entries take the form of:
# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
# where name is the file name, type can be one of:
# f A regular file
# d Directory
# c Character special device file
# b Block special device file
# p Fifo (named pipe)
# uid is the user id for the target file, gid is the group id for the
# target file. The rest of the entries (major, minor, etc) apply only
# to device special files.
# Have fun
# -Erik Andersen <andersen@codepoet.org>
#
#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
/dev d 755 0 0 - - - - -
/dev/pts d 755 0 0 - - - - -
/dev/fb d 755 0 0 - - - - -
/tmp d 1777 0 0 - - - - -
/etc d 755 0 0 - - - - -
/disk d 755 0 0 - - - - -
/home/default d 2755 1000 1000 - - - - -
#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
/bin/busybox f 4755 0 0 - - - - -
/etc/shadow f 600 0 0 - - - - -
/etc/passwd f 644 0 0 - - - - -
/etc/network/if-up.d d 755 0 0 - - - - -
/etc/network/if-pre-up.d d 755 0 0 - - - - -
/etc/network/if-down.d d 755 0 0 - - - - -
/etc/network/if-post-down.d d 755 0 0 - - - - -
/usr/share/udhcpc/default.script f 755 0 0 - - - - -
# uncomment this to allow starting x as non-root
#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
# Normal system devices
#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
/dev/mem c 640 0 0 1 1 0 0 -
/dev/kmem c 640 0 0 1 2 0 0 -
/dev/null c 666 0 0 1 3 0 0 -
/dev/zero c 666 0 0 1 5 0 0 -
/dev/urandom c 666 0 0 1 9 0 0 -
/dev/ram b 640 0 0 1 1 0 0 -
/dev/ram b 640 0 0 1 0 0 1 4
/dev/loop b 640 0 0 7 0 0 1 2
/dev/rtc c 640 0 0 10 135 - - -
/dev/console c 666 0 0 5 1 - - -
/dev/tty c 666 0 0 5 0 - - -
/dev/tty c 666 0 0 4 0 0 1 2
#/dev/ttyp c 666 0 0 3 0 0 1 10
#/dev/ptyp c 666 0 0 2 0 0 1 10
/dev/ptmx c 666 0 0 5 2 - - -
#/dev/ttyP c 666 0 0 57 0 0 1 4
/dev/ttyS c 666 0 0 4 64 0 1 4
/dev/fb c 640 0 5 29 0 0 32 4
#/dev/ttySA c 666 0 0 204 5 0 1 3
/dev/psaux c 666 0 0 10 1 0 0 -
#/dev/ppp c 666 0 0 108 0 - - -
# MTD stuff
#/dev/mtd c 640 0 0 90 0 0 2 4
#/dev/mtdblock b 640 0 0 31 0 0 1 4
#Tun/tap driver
/dev/net d 755 0 0 - - - - -
/dev/net/tun c 660 0 0 10 200 - - -
# Audio stuff
#/dev/audio c 666 0 29 14 4 - - -
#/dev/audio1 c 666 0 29 14 20 - - -
#/dev/dsp c 666 0 29 14 3 - - -
#/dev/dsp1 c 666 0 29 14 19 - - -
#/dev/sndstat c 666 0 29 14 6 - - -
# User-mode Linux stuff
#/dev/ubda b 640 0 0 98 0 0 0 -
#/dev/ubda b 640 0 0 98 1 1 1 15
# IDE Devices
#/dev/hda b 640 0 0 3 0 0 0 -
#/dev/hda b 640 0 0 3 1 1 1 15
#/dev/hdb b 640 0 0 3 64 0 0 -
#/dev/hdb b 640 0 0 3 65 1 1 15
#/dev/hdc b 640 0 0 22 0 0 0 -
#/dev/hdc b 640 0 0 22 1 1 1 15
#/dev/hdd b 640 0 0 22 64 0 0 -
#/dev/hdd b 640 0 0 22 65 1 1 15
#/dev/hde b 640 0 0 33 0 0 0 -
#/dev/hde b 640 0 0 33 1 1 1 15
#/dev/hdf b 640 0 0 33 64 0 0 -
#/dev/hdf b 640 0 0 33 65 1 1 15
#/dev/hdg b 640 0 0 34 0 0 0 -
#/dev/hdg b 640 0 0 34 1 1 1 15
#/dev/hdh b 640 0 0 34 64 0 0 -
#/dev/hdh b 640 0 0 34 65 1 1 15
# SCSI Devices
/dev/sda b 640 0 0 8 0 0 0 -
/dev/sda b 640 0 0 8 1 1 1 15
/dev/sdb b 640 0 0 8 16 0 0 -
/dev/sdb b 640 0 0 8 17 1 1 15
/dev/sdc b 640 0 0 8 32 0 0 -
/dev/sdc b 640 0 0 8 33 1 1 15
/dev/sdd b 640 0 0 8 48 0 0 -
/dev/sdd b 640 0 0 8 49 1 1 15
#/dev/sde b 640 0 0 8 64 0 0 -
#/dev/sde b 640 0 0 8 65 1 1 15
#/dev/sdf b 640 0 0 8 80 0 0 -
#/dev/sdf b 640 0 0 8 81 1 1 15
#/dev/sdg b 640 0 0 8 96 0 0 -
#/dev/sdg b 640 0 0 8 97 1 1 15
#/dev/sdh b 640 0 0 8 112 0 0 -
#/dev/sdh b 640 0 0 8 113 1 1 15
#/dev/sg c 640 0 0 21 0 0 1 15
#/dev/scd b 640 0 0 11 0 0 1 15
#/dev/st c 640 0 0 9 0 0 1 8
#/dev/nst c 640 0 0 9 128 0 1 8
#/dev/st c 640 0 0 9 32 1 1 4
#/dev/st c 640 0 0 9 64 1 1 4
#/dev/st c 640 0 0 9 96 1 1 4
# Floppy disk devices
#/dev/fd b 640 0 0 2 0 0 1 2
#/dev/fd0d360 b 640 0 0 2 4 0 0 -
#/dev/fd1d360 b 640 0 0 2 5 0 0 -
#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
# All the proprietary cdrom devices in the world
#/dev/aztcd b 640 0 0 29 0 0 0 -
#/dev/bpcd b 640 0 0 41 0 0 0 -
#/dev/capi20 c 640 0 0 68 0 0 1 2
#/dev/cdu31a b 640 0 0 15 0 0 0 -
#/dev/cdu535 b 640 0 0 24 0 0 0 -
#/dev/cm206cd b 640 0 0 32 0 0 0 -
#/dev/sjcd b 640 0 0 18 0 0 0 -
#/dev/sonycd b 640 0 0 15 0 0 0 -
#/dev/gscd b 640 0 0 16 0 0 0 -
#/dev/sbpcd b 640 0 0 25 0 0 0 -
#/dev/sbpcd b 640 0 0 25 0 0 1 4
#/dev/mcd b 640 0 0 23 0 0 0 -
#/dev/optcd b 640 0 0 17 0 0 0 -

1208
target/device/KwikByte/kb9202/kb9202-linux-2.6.24.config
View File

File diff suppressed because it is too large Load Diff

0
target/device/KwikByte/kb9202/target_skeleton/bin/.empty
View File

11
target/device/KwikByte/kb9202/target_skeleton/etc/fstab
View File

@ -1,11 +0,0 @@
# /etc/fstab: static file system information.
#
# <file system> <mount pt> <type> <options> <dump> <pass>
/dev/root / ext2 rw,noauto 0 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
tmpfs /tmp tmpfs defaults 0 0
none /proc/bus/usb usbfs defaults 0 0
/dev/sys /sys sysfs defaults 0 0

7
target/device/KwikByte/kb9202/target_skeleton/etc/group
View File

@ -1,7 +0,0 @@
root:x:0:root
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
adm:x:4:root,adm,daemon
tty:x:5:
lp:x:7:daemon,lp
nobody:x:99:

1
target/device/KwikByte/kb9202/target_skeleton/etc/hostname
View File

@ -1 +0,0 @@
KB9202B

15
target/device/KwikByte/kb9202/target_skeleton/etc/init.d/rcS
View File

@ -1,15 +0,0 @@
#!/bin/sh
/bin/mount -n -t proc proc /proc
/bin/mount -o remount,rw /
/bin/mount /sys
echo /sbin/mdev > /proc/sys/kernel/hotplug
/sbin/mdev -a
/bin/mount -a
/bin/hostname -F /etc/hostname
/sbin/ifconfig lo 127.0.0.1 up
/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
/sbin/ifup eth0
#telnetd -l /bin/sh

33
target/device/KwikByte/kb9202/target_skeleton/etc/inittab
View File

@ -1,33 +0,0 @@
# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels. The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id == tty to run on, or empty for /dev/console
# runlevels == ignored
# action == one of sysinit, respawn, askfirst, wait, and once
# process == program to run
# Startup the system
# now run any rc scripts
null::sysinit:/etc/init.d/rcS
# Put a getty on the serial port
ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
#tty1::respawn:-/bin/sh
#tty2::respawn:-/bin/sh
# Stuff to do for the 3-finger salute
::ctrlaltdel:/sbin/reboot
# Stuff to do before rebooting
null::shutdown:/usr/bin/killall klogd
null::shutdown:/usr/bin/killall syslogd
null::shutdown:/bin/umount -a -r
null::shutdown:/sbin/swapoff -a

7
target/device/KwikByte/kb9202/target_skeleton/etc/issue
View File

@ -1,7 +0,0 @@
----------------------------------
- -
- Sample file system for KB9202B -
- -
----------------------------------

6
target/device/KwikByte/kb9202/target_skeleton/etc/issue.net
View File

@ -1,6 +0,0 @@
----------------------------------
- -
- Sample file system for KB9202B -
- -
----------------------------------

BIN
target/device/KwikByte/kb9202/target_skeleton/etc/ld.so.cache
View File

Binary file not shown.

0
target/device/KwikByte/kb9202/target_skeleton/etc/ld.so.conf
View File

50
target/device/KwikByte/kb9202/target_skeleton/etc/mdev.conf
View File

@ -1,50 +0,0 @@
# mdev.conf for KB9202
#
# Syntax:
# <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
# @: run <CMD> after creating
# $: run <CMD> before removal
# *: like @ and $ at the same time
# <CMD> is run inside /dev using system()
full 0:0 666
null 0:0 777
zero 0:0 666
random 0:0 444
urandom 0:0 444
console 0:5 0600
kmem 0:9 000
mem 0:9 0640
ptmx 0:5 0660
sd[a-d] 0:6 0660
sd[a-d][1-8] 0:6 0660 *(/sbin/automount.script)
sdb.* 0:6 0660
hda.* 0:6 0660
hdb.* 0:6 0660
mtd.* 0:6 0660
mmc.* 0:6 0660
# Move input devices to input directory
event.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
mice 0:0 0660 @(mkdir -p input&&mv $MDEV input)
mouse.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
# Move sound devices to sound directory
pcm.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
seq 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
timer 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
control.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
tty 0:5 0660
tty0.* 0:5 0660
tty1.* 0:5 0660
tty2.* 0:5 0660
tty3.* 0:5 0660
tty4.* 0:5 0660
tty5.* 0:5 0660
tty6.* 0:5 0660
ttyS.* 0:20 640

1
target/device/KwikByte/kb9202/target_skeleton/etc/mtab
View File

@ -1 +0,0 @@
../proc/mounts

0
target/device/KwikByte/kb9202/target_skeleton/etc/network/if-down.d/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/etc/network/if-post-down.d/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/etc/network/if-pre-up.d/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/etc/network/if-up.d/.empty
View File

20
target/device/KwikByte/kb9202/target_skeleton/etc/network/interfaces
View File

@ -1,20 +0,0 @@
# /etc/network/interfaces -- configuration file for ifup/ifdown
# The loopback interface
# automatically added when upgrading
auto lo
iface lo inet loopback
# the first network card - this entry was created during the
# installation automatically added when upgrading
# static IP mode
# uncomment the next lines in this section (remove leading '#' characters)
#auto eth0
#iface eth0 inet static
# address 192.160.1.79
# netmask 255.255.255.0
# DHCP mode
# uncomment the next lines in this section (remove leading '#' characters)
#auto eth0
#iface eth0 inet dhcp

13
target/device/KwikByte/kb9202/target_skeleton/etc/passwd
View File

@ -1,13 +0,0 @@
root:x:0:0:root:/root:/bin/sh
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
bin:x:2:2:bin:/bin:/bin/sh
sys:x:3:3:sys:/dev:/bin/sh
sync:x:4:100:sync:/bin:/bin/sync
mail:x:8:8:mail:/var/spool/mail:/bin/sh
proxy:x:13:13:proxy:/bin:/bin/sh
www-data:x:33:33:www-data:/var/www:/bin/sh
backup:x:34:34:backup:/var/backups:/bin/sh
operator:x:37:37:Operator:/var:/bin/sh
sshd:x:103:99:Operator:/var:/bin/sh
nobody:x:99:99:nobody:/home:/bin/sh
default:x:1000:1000:Default non-root user:/home/default:/bin/sh

2
target/device/KwikByte/kb9202/target_skeleton/etc/profile
View File

@ -1,2 +0,0 @@
PATH="/usr/sbin:/bin:/usr/bin:/sbin"
PS1="[\u@\h:\w] "

31
target/device/KwikByte/kb9202/target_skeleton/etc/protocols
View File

@ -1,31 +0,0 @@
# /etc/protocols:
# $Id: protocols,v 1.1.1.1 2001/09/12 19:03:24 andersee Exp $
#
# Internet (IP) protocols
#
# from: @(#)protocols 5.1 (Berkeley) 4/17/89
#
# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
ip 0 IP # internet protocol, pseudo protocol number
icmp 1 ICMP # internet control message protocol
igmp 2 IGMP # Internet Group Management
ggp 3 GGP # gateway-gateway protocol
ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
st 5 ST # ST datagram mode
tcp 6 TCP # transmission control protocol
egp 8 EGP # exterior gateway protocol
pup 12 PUP # PARC universal packet protocol
udp 17 UDP # user datagram protocol
hmp 20 HMP # host monitoring protocol
xns-idp 22 XNS-IDP # Xerox NS IDP
rdp 27 RDP # "reliable datagram" protocol
iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
xtp 36 XTP # Xpress Tranfer Protocol
ddp 37 DDP # Datagram Delivery Protocol
idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
rspf 73 RSPF #Radio Shortest Path First.
vmtp 81 VMTP # Versatile Message Transport
ospf 89 OSPFIGP # Open Shortest Path First IGP
ipip 94 IPIP # Yet Another IP encapsulation
encap 98 ENCAP # Yet Another IP encapsulation

302
target/device/KwikByte/kb9202/target_skeleton/etc/services
View File

@ -1,302 +0,0 @@
# /etc/services:
# $Id: services,v 1.2 2003/06/14 00:12:17 timriker Exp $
#
# Network services, Internet style
#
# Note that it is presently the policy of IANA to assign a single well-known
# port number for both TCP and UDP; hence, most entries here have two entries
# even if the protocol doesn't support UDP operations.
# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
# are included, only the more common ones.
tcpmux 1/tcp # TCP port service multiplexer
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users
daytime 13/tcp
daytime 13/udp
netstat 15/tcp
qotd 17/tcp quote
msp 18/tcp # message send protocol
msp 18/udp # message send protocol
chargen 19/tcp ttytst source
chargen 19/udp ttytst source
ftp-data 20/tcp
ftp 21/tcp
fsp 21/udp fspd
ssh 22/tcp # SSH Remote Login Protocol
ssh 22/udp # SSH Remote Login Protocol
telnet 23/tcp
# 24 - private
smtp 25/tcp mail
# 26 - unassigned
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource # resource location
nameserver 42/tcp name # IEN 116
whois 43/tcp nicname
re-mail-ck 50/tcp # Remote Mail Checking Protocol
re-mail-ck 50/udp # Remote Mail Checking Protocol
domain 53/tcp nameserver # name-domain server
domain 53/udp nameserver
mtp 57/tcp # deprecated
bootps 67/tcp # BOOTP server
bootps 67/udp
bootpc 68/tcp # BOOTP client
bootpc 68/udp
tftp 69/udp
gopher 70/tcp # Internet Gopher
gopher 70/udp
rje 77/tcp netrjs
finger 79/tcp
www 80/tcp http # WorldWideWeb HTTP
www 80/udp # HyperText Transfer Protocol
link 87/tcp ttylink
kerberos 88/tcp kerberos5 krb5 # Kerberos v5
kerberos 88/udp kerberos5 krb5 # Kerberos v5
supdup 95/tcp
# 100 - reserved
hostnames 101/tcp hostname # usually from sri-nic
iso-tsap 102/tcp tsap # part of ISODE.
csnet-ns 105/tcp cso-ns # also used by CSO name server
csnet-ns 105/udp cso-ns
# unfortunately the poppassd (Eudora) uses a port which has already
# been assigned to a different service. We list the poppassd as an
# alias here. This should work for programs asking for this service.
# (due to a bug in inetd the 3com-tsmux line is disabled)
#3com-tsmux 106/tcp poppassd
#3com-tsmux 106/udp poppassd
rtelnet 107/tcp # Remote Telnet
rtelnet 107/udp
pop-2 109/tcp postoffice # POP version 2
pop-2 109/udp
pop-3 110/tcp # POP version 3
pop-3 110/udp
sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
auth 113/tcp authentication tap ident
sftp 115/tcp
uucp-path 117/tcp
nntp 119/tcp readnews untp # USENET News Transfer Protocol
ntp 123/tcp
ntp 123/udp # Network Time Protocol
netbios-ns 137/tcp # NETBIOS Name Service
netbios-ns 137/udp
netbios-dgm 138/tcp # NETBIOS Datagram Service
netbios-dgm 138/udp
netbios-ssn 139/tcp # NETBIOS session service
netbios-ssn 139/udp
imap2 143/tcp # Interim Mail Access Proto v2
imap2 143/udp
snmp 161/udp # Simple Net Mgmt Proto
snmp-trap 162/udp snmptrap # Traps for SNMP
cmip-man 163/tcp # ISO mgmt over IP (CMOT)
cmip-man 163/udp
cmip-agent 164/tcp
cmip-agent 164/udp
xdmcp 177/tcp # X Display Mgr. Control Proto
xdmcp 177/udp
nextstep 178/tcp NeXTStep NextStep # NeXTStep window
nextstep 178/udp NeXTStep NextStep # server
bgp 179/tcp # Border Gateway Proto.
bgp 179/udp
prospero 191/tcp # Cliff Neuman's Prospero
prospero 191/udp
irc 194/tcp # Internet Relay Chat
irc 194/udp
smux 199/tcp # SNMP Unix Multiplexer
smux 199/udp
at-rtmp 201/tcp # AppleTalk routing
at-rtmp 201/udp
at-nbp 202/tcp # AppleTalk name binding
at-nbp 202/udp
at-echo 204/tcp # AppleTalk echo
at-echo 204/udp
at-zis 206/tcp # AppleTalk zone information
at-zis 206/udp
qmtp 209/tcp # The Quick Mail Transfer Protocol
qmtp 209/udp # The Quick Mail Transfer Protocol
z3950 210/tcp wais # NISO Z39.50 database
z3950 210/udp wais
ipx 213/tcp # IPX
ipx 213/udp
imap3 220/tcp # Interactive Mail Access
imap3 220/udp # Protocol v3
ulistserv 372/tcp # UNIX Listserv
ulistserv 372/udp
https 443/tcp # MCom
https 443/udp # MCom
snpp 444/tcp # Simple Network Paging Protocol
snpp 444/udp # Simple Network Paging Protocol
saft 487/tcp # Simple Asynchronous File Transfer
saft 487/udp # Simple Asynchronous File Transfer
npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
#
# UNIX specific services
#
exec 512/tcp
biff 512/udp comsat
login 513/tcp
who 513/udp whod
shell 514/tcp cmd # no passwords used
syslog 514/udp
printer 515/tcp spooler # line printer spooler
talk 517/udp
ntalk 518/udp
route 520/udp router routed # RIP
timed 525/udp timeserver
tempo 526/tcp newdate
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp # -for emergency broadcasts
uucp 540/tcp uucpd # uucp daemon
afpovertcp 548/tcp # AFP over TCP
afpovertcp 548/udp # AFP over TCP
remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
klogin 543/tcp # Kerberized `rlogin' (v5)
kshell 544/tcp krcmd # Kerberized `rsh' (v5)
kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
#
webster 765/tcp # Network dictionary
webster 765/udp
#
# From ``Assigned Numbers'':
#
#> The Registered Ports are not controlled by the IANA and on most systems
#> can be used by ordinary user processes or programs executed by ordinary
#> users.
#
#> Ports are used in the TCP [45,106] to name the ends of logical
#> connections which carry long term conversations. For the purpose of
#> providing services to unknown callers, a service contact port is
#> defined. This list specifies the port used by the server process as its
#> contact port. While the IANA can not control uses of these ports it
#> does register or list uses of these ports as a convienence to the
#> community.
#
nfsdstatus 1110/tcp
nfsd-keepalive 1110/udp
ingreslock 1524/tcp
ingreslock 1524/udp
prospero-np 1525/tcp # Prospero non-privileged
prospero-np 1525/udp
datametrics 1645/tcp old-radius # datametrics / old radius entry
datametrics 1645/udp old-radius # datametrics / old radius entry
sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
radius 1812/tcp # Radius
radius 1812/udp # Radius
radacct 1813/tcp # Radius Accounting
radacct 1813/udp # Radius Accounting
nfsd 2049/tcp nfs
nfsd 2049/udp nfs
cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
mysql 3306/tcp # MySQL
mysql 3306/udp # MySQL
rfe 5002/tcp # Radio Free Ethernet
rfe 5002/udp # Actually uses UDP only
cfengine 5308/tcp # CFengine
cfengine 5308/udp # CFengine
bbs 7000/tcp # BBS service
#
#
# Kerberos (Project Athena/MIT) services
# Note that these are for Kerberos v4, and are unofficial. Sites running
# v4 should uncomment these and comment out the v5 entries above.
#
kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
kerberos_master 751/udp # Kerberos authentication
kerberos_master 751/tcp # Kerberos authentication
passwd_server 752/udp # Kerberos passwd server
krb_prop 754/tcp # Kerberos slave propagation
krbupdate 760/tcp kreg # Kerberos registration
kpasswd 761/tcp kpwd # Kerberos "passwd"
kpop 1109/tcp # Pop with Kerberos
knetd 2053/tcp # Kerberos de-multiplexor
zephyr-srv 2102/udp # Zephyr server
zephyr-clt 2103/udp # Zephyr serv-hm connection
zephyr-hm 2104/udp # Zephyr hostmanager
eklogin 2105/tcp # Kerberos encrypted rlogin
#
# Unofficial but necessary (for NetBSD) services
#
supfilesrv 871/tcp # SUP server
supfiledbg 1127/tcp # SUP debugging
#
# Datagram Delivery Protocol services
#
rtmp 1/ddp # Routing Table Maintenance Protocol
nbp 2/ddp # Name Binding Protocol
echo 4/ddp # AppleTalk Echo Protocol
zip 6/ddp # Zone Information Protocol
#
# Services added for the Debian GNU/Linux distribution
poppassd 106/tcp # Eudora
poppassd 106/udp # Eudora
mailq 174/tcp # Mailer transport queue for Zmailer
mailq 174/tcp # Mailer transport queue for Zmailer
omirr 808/tcp omirrd # online mirror
omirr 808/udp omirrd # online mirror
rmtcfg 1236/tcp # Gracilis Packeten remote config server
xtel 1313/tcp # french minitel
coda_opcons 1355/udp # Coda opcons (Coda fs)
coda_venus 1363/udp # Coda venus (Coda fs)
coda_auth 1357/udp # Coda auth (Coda fs)
coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
coda_filesrv 1361/udp # Coda filesrv (Coda fs)
codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
coda_aux1 1431/udp # coda auxiliary service (Coda fs)
coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
coda_aux2 1433/udp # coda auxiliary service (Coda fs)
coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
coda_aux3 1435/udp # coda auxiliary service (Coda fs)
cfinger 2003/tcp # GNU Finger
afbackup 2988/tcp # Afbackup system
afbackup 2988/udp # Afbackup system
icp 3130/tcp # Internet Cache Protocol (Squid)
icp 3130/udp # Internet Cache Protocol (Squid)
postgres 5432/tcp # POSTGRES
postgres 5432/udp # POSTGRES
fax 4557/tcp # FAX transmission service (old)
hylafax 4559/tcp # HylaFAX client-server protocol (new)
noclog 5354/tcp # noclogd with TCP (nocol)
noclog 5354/udp # noclogd with UDP (nocol)
hostmon 5355/tcp # hostmon uses TCP (nocol)
hostmon 5355/udp # hostmon uses TCP (nocol)
ircd 6667/tcp # Internet Relay Chat
ircd 6667/udp # Internet Relay Chat
webcache 8080/tcp # WWW caching service
webcache 8080/udp # WWW caching service
tproxy 8081/tcp # Transparent Proxy
tproxy 8081/udp # Transparent Proxy
mandelspawn 9359/udp mandelbrot # network mandelbrot
amanda 10080/udp # amanda backup services
amandaidx 10082/tcp # amanda backup services
amidxtape 10083/tcp # amanda backup services
isdnlog 20011/tcp # isdn logging system
isdnlog 20011/udp # isdn logging system
vboxd 20012/tcp # voice box system
vboxd 20012/udp # voice box system
binkp 24554/tcp # Binkley
binkp 24554/udp # Binkley
asp 27374/tcp # Address Search Protocol
asp 27374/udp # Address Search Protocol
tfido 60177/tcp # Ifmail
tfido 60177/udp # Ifmail
fido 60179/tcp # Ifmail
fido 60179/udp # Ifmail
# Local services

12
target/device/KwikByte/kb9202/target_skeleton/etc/shadow
View File

@ -1,12 +0,0 @@
root::10933:0:99999:7:::
bin:*:10933:0:99999:7:::
daemon:*:10933:0:99999:7:::
adm:*:10933:0:99999:7:::
lp:*:10933:0:99999:7:::
sync:*:10933:0:99999:7:::
shutdown:*:10933:0:99999:7:::
halt:*:10933:0:99999:7:::
uucp:*:10933:0:99999:7:::
operator:*:10933:0:99999:7:::
nobody:*:10933:0:99999:7:::
default::10933:0:99999:7:::

32
target/device/KwikByte/kb9202/target_skeleton/etc/vsftpd.conf
View File

@ -1,32 +0,0 @@
# Standalone mode
listen=YES
max_clients=200
max_per_ip=4
# Access rights
anonymous_enable=YES
local_enable=NO
write_enable=NO
anon_upload_enable=NO
anon_mkdir_write_enable=NO
anon_other_write_enable=NO
# Security
anon_world_readable_only=YES
connect_from_port_20=YES
hide_ids=YES
pasv_min_port=50000
pasv_max_port=60000
# Features
xferlog_enable=YES
ls_recurse_enable=NO
ascii_download_enable=NO
async_abor_enable=YES
# Performance
one_process_model=YES
idle_session_timeout=120
data_connection_timeout=300
accept_timeout=60
connect_timeout=60
anon_max_rate=500000
ftpd_banner=Welcome to KwikByte KB9202B FTP Server

0
target/device/KwikByte/kb9202/target_skeleton/home/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/lib/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/proc/.empty
View File

15
target/device/KwikByte/kb9202/target_skeleton/root/.ash_history
View File

@ -1,15 +0,0 @@
ls
ls
cd
mount /dev/mmcblk0p1 /mnt/mmc
insmod /mnt/mmc/modules/2.6.24/kernel/drivers/usb/gadget/g_zero.ko
umount /mnt/mmc
mount /dev/mmcblk0p1 /mnt/mmc
insmod /mnt/mmc/g_zero.ko
insmod /mnt/mmc/g_zero.ko
cd /var/log/
ls
cd
cd /proc
lsmod
ls

21
target/device/KwikByte/kb9202/target_skeleton/sbin/automount.script
View File

@ -1,21 +0,0 @@
#! /bin/sh
if [ x$ACTION = "x" ] ; then
echo "$0: should be called by mdev"
exit -1
fi
if [ $ACTION = "remove" ] ; then
umount -f /dev/$MDEV
rmdir /disk/$MDEV
exit 0
fi
if [ $ACTION = "add" ] ; then
mkdir -p /disk/$MDEV
mount -o sync /dev/$MDEV /disk/$MDEV
exit 0
fi
echo "$0: $ACTION=ACTION not recognized" > /dev/console
env > /dev/console

0
target/device/KwikByte/kb9202/target_skeleton/sys/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/tmp/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/usr/bin/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/usr/lib/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/usr/sbin/.empty
View File

40
target/device/KwikByte/kb9202/target_skeleton/usr/share/udhcpc/default.script
View File

@ -1,40 +0,0 @@
#!/bin/sh
# udhcpc script edited by Tim Riker <Tim@Rikers.org>
[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
RESOLV_CONF="/etc/resolv.conf"
[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
[ -n "$subnet" ] && NETMASK="netmask $subnet"
case "$1" in
deconfig)
/sbin/ifconfig $interface 0.0.0.0
;;
renew|bound)
/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
if [ -n "$router" ] ; then
echo "deleting routers"
while route del default gw 0.0.0.0 dev $interface ; do
:
done
metric=0
for i in $router ; do
route add default gw $i dev $interface metric $((metric++))
done
fi
echo -n > $RESOLV_CONF
[ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
for i in $dns ; do
echo adding dns $i
echo nameserver $i >> $RESOLV_CONF
done
;;
esac
exit 0

1
target/device/KwikByte/kb9202/target_skeleton/var/adm
View File

@ -1 +0,0 @@
log

0
target/device/KwikByte/kb9202/target_skeleton/var/log/.empty
View File

0
target/device/KwikByte/kb9202/target_skeleton/var/run/.empty
View File

1
target/device/KwikByte/kb9202/target_skeleton/var/tmp
View File

@ -1 +0,0 @@
../tmp