qemu/microblazeel-mmu: add new sample config
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Tested-by: Stephan Hoffmann <sho@reLinux.de> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit is contained in:
Gustavo Zacarias
Peter Korsgaard
parent
1eb46725de
commit
2bf6c987e6
67
board/qemu/microblazeel-mmu/kernel-3.3.config
Normal file
67
board/qemu/microblazeel-mmu/kernel-3.3.config
Normal file
@ -0,0 +1,67 @@
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
|
||||
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_KALLSYMS_EXTRA_PASS=y
|
||||
# CONFIG_HOTPLUG is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_SIGNALFD is not set
|
||||
# CONFIG_SHMEM is not set
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
|
||||
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
|
||||
CONFIG_HZ_100=y
|
||||
CONFIG_MMU=y
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE_FORCE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_XILINX_EMACLITE=y
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_UARTLITE=y
|
||||
CONFIG_SERIAL_UARTLITE_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_CIFS=y
|
||||
CONFIG_CIFS_STATS=y
|
||||
CONFIG_CIFS_STATS2=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_DEBUG_SLAB=y
|
||||
CONFIG_DEBUG_SPINLOCK=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
6
board/qemu/microblazeel-mmu/readme.txt
Normal file
6
board/qemu/microblazeel-mmu/readme.txt
Normal file
@ -0,0 +1,6 @@
|
||||
Run the emulation with:
|
||||
|
||||
qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
|
||||
|
||||
The login prompt will appear in the terminal that started Qemu.
|
||||
|
||||
367
board/qemu/microblazeel-mmu/system.dts
Normal file
367
board/qemu/microblazeel-mmu/system.dts
Normal file
@ -0,0 +1,367 @@
|
||||
/*
|
||||
* Device Tree Generator version: 1.1
|
||||
*
|
||||
* (C) Copyright 2007-2008 Xilinx, Inc.
|
||||
* (C) Copyright 2007-2009 Michal Simek
|
||||
*
|
||||
* Michal SIMEK <monstr@monstr.eu>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* CAUTION: This file is automatically generated by libgen.
|
||||
* Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
|
||||
*
|
||||
* XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,microblaze";
|
||||
hard-reset-gpios = <&LEDs_8Bit 2 1>;
|
||||
model = "testing";
|
||||
DDR2_SDRAM: memory@90000000 {
|
||||
device_type = "memory";
|
||||
reg = < 0x90000000 0x10000000 >;
|
||||
} ;
|
||||
aliases {
|
||||
ethernet0 = &Hard_Ethernet_MAC;
|
||||
serial0 = &RS232_Uart_1;
|
||||
} ;
|
||||
chosen {
|
||||
bootargs = "console=ttyUL0,115200 highres=on";
|
||||
linux,stdout-path = "/plb@0/serial@84000000";
|
||||
} ;
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#cpus = <0x1>;
|
||||
#size-cells = <0>;
|
||||
microblaze_0: cpu@0 {
|
||||
clock-frequency = <125000000>;
|
||||
compatible = "xlnx,microblaze-7.10.d";
|
||||
d-cache-baseaddr = <0x90000000>;
|
||||
d-cache-highaddr = <0x9fffffff>;
|
||||
d-cache-line-size = <0x10>;
|
||||
d-cache-size = <0x2000>;
|
||||
device_type = "cpu";
|
||||
i-cache-baseaddr = <0x90000000>;
|
||||
i-cache-highaddr = <0x9fffffff>;
|
||||
i-cache-line-size = <0x10>;
|
||||
i-cache-size = <0x2000>;
|
||||
model = "microblaze,7.10.d";
|
||||
reg = <0>;
|
||||
timebase-frequency = <125000000>;
|
||||
xlnx,addr-tag-bits = <0xf>;
|
||||
xlnx,allow-dcache-wr = <0x1>;
|
||||
xlnx,allow-icache-wr = <0x1>;
|
||||
xlnx,area-optimized = <0x0>;
|
||||
xlnx,cache-byte-size = <0x2000>;
|
||||
xlnx,d-lmb = <0x1>;
|
||||
xlnx,d-opb = <0x0>;
|
||||
xlnx,d-plb = <0x1>;
|
||||
xlnx,data-size = <0x20>;
|
||||
xlnx,dcache-addr-tag = <0xf>;
|
||||
xlnx,dcache-always-used = <0x1>;
|
||||
xlnx,dcache-byte-size = <0x2000>;
|
||||
xlnx,dcache-line-len = <0x4>;
|
||||
xlnx,dcache-use-fsl = <0x1>;
|
||||
xlnx,debug-enabled = <0x1>;
|
||||
xlnx,div-zero-exception = <0x1>;
|
||||
xlnx,dopb-bus-exception = <0x0>;
|
||||
xlnx,dynamic-bus-sizing = <0x1>;
|
||||
xlnx,edge-is-positive = <0x1>;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,endianness = <0x1>;
|
||||
xlnx,fpu-exception = <0x1>;
|
||||
xlnx,fsl-data-size = <0x20>;
|
||||
xlnx,fsl-exception = <0x0>;
|
||||
xlnx,fsl-links = <0x0>;
|
||||
xlnx,i-lmb = <0x1>;
|
||||
xlnx,i-opb = <0x0>;
|
||||
xlnx,i-plb = <0x1>;
|
||||
xlnx,icache-always-used = <0x1>;
|
||||
xlnx,icache-line-len = <0x4>;
|
||||
xlnx,icache-use-fsl = <0x1>;
|
||||
xlnx,ill-opcode-exception = <0x1>;
|
||||
xlnx,instance = "microblaze_0";
|
||||
xlnx,interconnect = <0x1>;
|
||||
xlnx,interrupt-is-edge = <0x0>;
|
||||
xlnx,iopb-bus-exception = <0x0>;
|
||||
xlnx,mmu-dtlb-size = <0x4>;
|
||||
xlnx,mmu-itlb-size = <0x2>;
|
||||
xlnx,mmu-tlb-access = <0x3>;
|
||||
xlnx,mmu-zones = <0x10>;
|
||||
xlnx,number-of-pc-brk = <0x1>;
|
||||
xlnx,number-of-rd-addr-brk = <0x0>;
|
||||
xlnx,number-of-wr-addr-brk = <0x0>;
|
||||
xlnx,opcode-0x0-illegal = <0x1>;
|
||||
xlnx,pvr = <0x2>;
|
||||
xlnx,pvr-user1 = <0x0>;
|
||||
xlnx,pvr-user2 = <0x0>;
|
||||
xlnx,reset-msr = <0x0>;
|
||||
xlnx,sco = <0x0>;
|
||||
xlnx,unaligned-exceptions = <0x1>;
|
||||
xlnx,use-barrel = <0x1>;
|
||||
xlnx,use-dcache = <0x1>;
|
||||
xlnx,use-div = <0x1>;
|
||||
xlnx,use-ext-brk = <0x1>;
|
||||
xlnx,use-ext-nm-brk = <0x1>;
|
||||
xlnx,use-extended-fsl-instr = <0x0>;
|
||||
xlnx,use-fpu = <0x2>;
|
||||
xlnx,use-hw-mul = <0x2>;
|
||||
xlnx,use-icache = <0x1>;
|
||||
xlnx,use-interrupt = <0x1>;
|
||||
xlnx,use-mmu = <0x3>;
|
||||
xlnx,use-msr-instr = <0x1>;
|
||||
xlnx,use-pcmp-instr = <0x1>;
|
||||
} ;
|
||||
} ;
|
||||
mb_plb: plb@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
|
||||
ranges ;
|
||||
FLASH: flash@a0000000 {
|
||||
bank-width = <2>;
|
||||
compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
|
||||
reg = < 0xa0000000 0x2000000 >;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,include-datawidth-matching-0 = <0x1>;
|
||||
xlnx,include-datawidth-matching-1 = <0x0>;
|
||||
xlnx,include-datawidth-matching-2 = <0x0>;
|
||||
xlnx,include-datawidth-matching-3 = <0x0>;
|
||||
xlnx,include-negedge-ioregs = <0x0>;
|
||||
xlnx,include-plb-ipif = <0x1>;
|
||||
xlnx,include-wrbuf = <0x1>;
|
||||
xlnx,max-mem-width = <0x10>;
|
||||
xlnx,mch-native-dwidth = <0x20>;
|
||||
xlnx,mch-plb-clk-period-ps = <0x1f40>;
|
||||
xlnx,mch-splb-awidth = <0x20>;
|
||||
xlnx,mch0-accessbuf-depth = <0x10>;
|
||||
xlnx,mch0-protocol = <0x0>;
|
||||
xlnx,mch0-rddatabuf-depth = <0x10>;
|
||||
xlnx,mch1-accessbuf-depth = <0x10>;
|
||||
xlnx,mch1-protocol = <0x0>;
|
||||
xlnx,mch1-rddatabuf-depth = <0x10>;
|
||||
xlnx,mch2-accessbuf-depth = <0x10>;
|
||||
xlnx,mch2-protocol = <0x0>;
|
||||
xlnx,mch2-rddatabuf-depth = <0x10>;
|
||||
xlnx,mch3-accessbuf-depth = <0x10>;
|
||||
xlnx,mch3-protocol = <0x0>;
|
||||
xlnx,mch3-rddatabuf-depth = <0x10>;
|
||||
xlnx,mem0-width = <0x10>;
|
||||
xlnx,mem1-width = <0x20>;
|
||||
xlnx,mem2-width = <0x20>;
|
||||
xlnx,mem3-width = <0x20>;
|
||||
xlnx,num-banks-mem = <0x1>;
|
||||
xlnx,num-channels = <0x0>;
|
||||
xlnx,priority-mode = <0x0>;
|
||||
xlnx,synch-mem-0 = <0x0>;
|
||||
xlnx,synch-mem-1 = <0x0>;
|
||||
xlnx,synch-mem-2 = <0x0>;
|
||||
xlnx,synch-mem-3 = <0x0>;
|
||||
xlnx,synch-pipedelay-0 = <0x2>;
|
||||
xlnx,synch-pipedelay-1 = <0x2>;
|
||||
xlnx,synch-pipedelay-2 = <0x2>;
|
||||
xlnx,synch-pipedelay-3 = <0x2>;
|
||||
xlnx,tavdv-ps-mem-0 = <0x1adb0>;
|
||||
xlnx,tavdv-ps-mem-1 = <0x3a98>;
|
||||
xlnx,tavdv-ps-mem-2 = <0x3a98>;
|
||||
xlnx,tavdv-ps-mem-3 = <0x3a98>;
|
||||
xlnx,tcedv-ps-mem-0 = <0x1adb0>;
|
||||
xlnx,tcedv-ps-mem-1 = <0x3a98>;
|
||||
xlnx,tcedv-ps-mem-2 = <0x3a98>;
|
||||
xlnx,tcedv-ps-mem-3 = <0x3a98>;
|
||||
xlnx,thzce-ps-mem-0 = <0x88b8>;
|
||||
xlnx,thzce-ps-mem-1 = <0x1b58>;
|
||||
xlnx,thzce-ps-mem-2 = <0x1b58>;
|
||||
xlnx,thzce-ps-mem-3 = <0x1b58>;
|
||||
xlnx,thzoe-ps-mem-0 = <0x1b58>;
|
||||
xlnx,thzoe-ps-mem-1 = <0x1b58>;
|
||||
xlnx,thzoe-ps-mem-2 = <0x1b58>;
|
||||
xlnx,thzoe-ps-mem-3 = <0x1b58>;
|
||||
xlnx,tlzwe-ps-mem-0 = <0x88b8>;
|
||||
xlnx,tlzwe-ps-mem-1 = <0x0>;
|
||||
xlnx,tlzwe-ps-mem-2 = <0x0>;
|
||||
xlnx,tlzwe-ps-mem-3 = <0x0>;
|
||||
xlnx,twc-ps-mem-0 = <0x2af8>;
|
||||
xlnx,twc-ps-mem-1 = <0x3a98>;
|
||||
xlnx,twc-ps-mem-2 = <0x3a98>;
|
||||
xlnx,twc-ps-mem-3 = <0x3a98>;
|
||||
xlnx,twp-ps-mem-0 = <0x11170>;
|
||||
xlnx,twp-ps-mem-1 = <0x2ee0>;
|
||||
xlnx,twp-ps-mem-2 = <0x2ee0>;
|
||||
xlnx,twp-ps-mem-3 = <0x2ee0>;
|
||||
xlnx,xcl0-linesize = <0x4>;
|
||||
xlnx,xcl0-writexfer = <0x1>;
|
||||
xlnx,xcl1-linesize = <0x4>;
|
||||
xlnx,xcl1-writexfer = <0x1>;
|
||||
xlnx,xcl2-linesize = <0x4>;
|
||||
xlnx,xcl2-writexfer = <0x1>;
|
||||
xlnx,xcl3-linesize = <0x4>;
|
||||
xlnx,xcl3-writexfer = <0x1>;
|
||||
} ;
|
||||
Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,compound";
|
||||
ranges ;
|
||||
ethernet@81c00000 {
|
||||
compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
|
||||
device_type = "network";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 5 2 >;
|
||||
llink-connected = <&PIM3>;
|
||||
local-mac-address = [ 00 0a 35 00 00 00 ];
|
||||
reg = < 0x81c00000 0x40 >;
|
||||
xlnx,bus2core-clk-ratio = <0x1>;
|
||||
xlnx,phy-type = <0x1>;
|
||||
xlnx,phyaddr = <0x1>;
|
||||
xlnx,rxcsum = <0x0>;
|
||||
xlnx,rxfifo = <0x1000>;
|
||||
xlnx,temac-type = <0x0>;
|
||||
xlnx,txcsum = <0x0>;
|
||||
xlnx,txfifo = <0x1000>;
|
||||
} ;
|
||||
} ;
|
||||
IIC_EEPROM: i2c@81600000 {
|
||||
compatible = "xlnx,xps-iic-2.00.a";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 6 2 >;
|
||||
reg = < 0x81600000 0x10000 >;
|
||||
xlnx,clk-freq = <0x7735940>;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,gpo-width = <0x1>;
|
||||
xlnx,iic-freq = <0x186a0>;
|
||||
xlnx,scl-inertial-delay = <0x0>;
|
||||
xlnx,sda-inertial-delay = <0x0>;
|
||||
xlnx,ten-bit-adr = <0x0>;
|
||||
} ;
|
||||
LEDs_8Bit: gpio@81400000 {
|
||||
compatible = "xlnx,xps-gpio-1.00.a";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 7 2 >;
|
||||
reg = < 0x81400000 0x10000 >;
|
||||
xlnx,all-inputs = <0x0>;
|
||||
xlnx,all-inputs-2 = <0x0>;
|
||||
xlnx,dout-default = <0x0>;
|
||||
xlnx,dout-default-2 = <0x0>;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,gpio-width = <0x8>;
|
||||
xlnx,interrupt-present = <0x1>;
|
||||
xlnx,is-bidir = <0x1>;
|
||||
xlnx,is-bidir-2 = <0x1>;
|
||||
xlnx,is-dual = <0x0>;
|
||||
xlnx,tri-default = <0xffffffff>;
|
||||
xlnx,tri-default-2 = <0xffffffff>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
} ;
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
heartbeat {
|
||||
label = "Heartbeat";
|
||||
gpios = <&LEDs_8Bit 4 1>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
yellow {
|
||||
label = "Yellow";
|
||||
gpios = <&LEDs_8Bit 5 1>;
|
||||
};
|
||||
|
||||
red {
|
||||
label = "Red";
|
||||
gpios = <&LEDs_8Bit 6 1>;
|
||||
};
|
||||
|
||||
green {
|
||||
label = "Green";
|
||||
gpios = <&LEDs_8Bit 7 1>;
|
||||
};
|
||||
} ;
|
||||
RS232_Uart_1: serial@84000000 {
|
||||
clock-frequency = <125000000>;
|
||||
compatible = "xlnx,xps-uartlite-1.00.a";
|
||||
current-speed = <115200>;
|
||||
device_type = "serial";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 8 0 >;
|
||||
port-number = <0>;
|
||||
reg = < 0x84000000 0x10000 >;
|
||||
xlnx,baudrate = <0x1c200>;
|
||||
xlnx,data-bits = <0x8>;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,odd-parity = <0x0>;
|
||||
xlnx,use-parity = <0x0>;
|
||||
} ;
|
||||
SysACE_CompactFlash: sysace@83600000 {
|
||||
compatible = "xlnx,xps-sysace-1.00.a";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 4 2 >;
|
||||
reg = < 0x83600000 0x10000 >;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,mem-width = <0x10>;
|
||||
} ;
|
||||
debug_module: debug@84400000 {
|
||||
compatible = "xlnx,mdm-1.00.d";
|
||||
reg = < 0x84400000 0x10000 >;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,interconnect = <0x1>;
|
||||
xlnx,jtag-chain = <0x2>;
|
||||
xlnx,mb-dbg-ports = <0x1>;
|
||||
xlnx,uart-width = <0x8>;
|
||||
xlnx,use-uart = <0x1>;
|
||||
xlnx,write-fsl-ports = <0x0>;
|
||||
} ;
|
||||
mpmc@90000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,mpmc-4.02.a";
|
||||
ranges ;
|
||||
PIM3: sdma@84600180 {
|
||||
compatible = "xlnx,ll-dma-1.00.a";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 2 2 1 2 >;
|
||||
reg = < 0x84600180 0x80 >;
|
||||
} ;
|
||||
} ;
|
||||
xps_intc_0: interrupt-controller@81800000 {
|
||||
#interrupt-cells = <0x2>;
|
||||
compatible = "xlnx,xps-intc-1.00.a";
|
||||
interrupt-controller ;
|
||||
reg = < 0x81800000 0x10000 >;
|
||||
xlnx,kind-of-intr = <0x100>;
|
||||
xlnx,num-intr-inputs = <0x9>;
|
||||
} ;
|
||||
xps_timer_1: timer@83c00000 {
|
||||
compatible = "xlnx,xps-timer-1.00.a";
|
||||
interrupt-parent = <&xps_intc_0>;
|
||||
interrupts = < 3 2 >;
|
||||
reg = < 0x83c00000 0x10000 >;
|
||||
xlnx,count-width = <0x20>;
|
||||
xlnx,family = "virtex5";
|
||||
xlnx,gen0-assert = <0x1>;
|
||||
xlnx,gen1-assert = <0x1>;
|
||||
xlnx,one-timer-only = <0x0>;
|
||||
xlnx,trig0-assert = <0x1>;
|
||||
xlnx,trig1-assert = <0x1>;
|
||||
} ;
|
||||
} ;
|
||||
} ;
|
||||
17
configs/qemu_microblazeel_mmu_defconfig
Normal file
17
configs/qemu_microblazeel_mmu_defconfig
Normal file
@ -0,0 +1,17 @@
|
||||
BR2_microblaze=y
|
||||
BR2_microblazeel=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="microblazeel-unknown-linux-gnu"
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CXX=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_ROOTFS_INITRAMFS=y
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/kernel-3.3.config"
|
||||
BR2_LINUX_KERNEL_DTS_FILE="board/qemu/microblazeel-mmu/system.dts"
|
||||
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
|
||||
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="linux.bin"
|
||||
Loading…
Reference in New Issue
Block a user