Switch to proper homepage, download from homepage and add a hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop md5 and calculated sha256 and switch to upstream-provided sha512.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the toolchain is always wrapped and the wrapper already passes
BR2_TARGET_OPTIMIZATION (through BR_ADDITIONAL_CFLAGS), there is no longer
any need to pass it in TARGET_CFLAGS as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--enable-sandboxed and --with-driver options were used in 0.9.1
>From 0.9.2 they are not used anymore.
Signed-off-by: David Kosir <david.kosir@bylapis.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: resend without whitespace errors]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The content of the saned.socket and saned@.service files is based on the
instructions of the sane-backends manual.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license for libcurl is actually 'ISC' not 'ICS'.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case cairo support is (auto-)detected cairo PNG support
is required.
Fixes ([1]):
../gst-libs/gst/video/.libs/libgstvalidatevideo-1.0.so: undefined reference to `cairo_surface_write_to_png'
../gst-libs/gst/video/.libs/libgstvalidatevideo-1.0.so: undefined reference to `cairo_image_surface_create_from_png'
collect2: error: ld returned 1 exit status
[1] http://autobuild.buildroot.net/results/c5e/c5eb6cb12dba559226c67f5d258cc151aa8a8d3a
[Peter: reworded comment, dropped extra line]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
my previous patch about static build (0001-fix-EUMM.patch) was not the good fix.
see discussion: http://github.com/arsv/perl-cross/issues/18
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove upstream or unneeded patches. Renumber and refresh the doc disable
patch. Add a different version of the lanplus disable fix (sent upstream) that
integrates with upstream change in this area.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For quite some time all ARC changes have been pushed upstream.
So both uClibc master branch and uClibc-ng have full ARC support
including the most recent changes.
I.e. finally we have reached the point when there's no need in
Synopsys fork of uClibc on GitHub and it will soon be obsoleted and
removed at some pint of time.
Now since vanilla uClibc hasn't seen any releases for many years we cannot
really use it for ARC. Fortunately there exists uClibc-ng and Waldemar
cuts releases regularly - that works perfectly fine for us.
That patch removes all mentions of ARC's uClibc which in turn makes
uClibc-ng default libc for ARC.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-By: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes if host-python is around it doesn't work too well with the
distro python (Gentoo, FC20 at least) leading to build failures.
This failure is very hard to trigger, it's normally easier to do so by
enabling top-level parallel builds.
Fixes:
http://autobuild.buildroot.net/results/0f8/0f881e322b7f9d244b8dd2440ba0afd3a8418027/
While at it update the configure options to avoid any host
libraries/tools from leaking in, new naming conventions and options.
And remove dead code dealing with the nothreaded variant.
Signed-off-by: Gustavo Zacarias <gustavozacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch caused an unfortunate regression that prevents any handlers
from being registered (runtime issue). This means swupdate cannot
perform any update. Upstream has reverted it.
See discussion:
https://groups.google.com/d/msg/swupdate/oVIhJmYPT8A/eq3uZvYVDQAJ
This reverts commit a8cc6eeec5.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
add this heuristic when no specific license file is found
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
with the option -noxs, the Pure Perl version is always built.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
replace true/false with ON/OFF for consistency
Signed-off-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use KMOD_BIN_PATH instead of doubling logic, add comment explaining
why this is needed]
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A typo sneaked in during my cleanups of x265, fix it.
Reported-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use BR2_SHARED_STATIC_LIBS for building both static and shared boost libs.
The static libs are copied to the staging directory. Only the shared libs are
copied to the rootfs image.
[Thomas:
- remove empty else clause, and instead add a comment that explains
why we're doing something only for the BR2_STATIC_LIBS=y and
BR2_SHARED_LIBS=y.
- remove trailing backslash at the end of the BOOST_CONF_OPTS
definition.]
Signed-off-by: Jonathan Ben Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than pointing at a developer's github repository point at the
official Balabit one. The commit SHAs are the same so no other change is
needed.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At the same time perform a GitHub migration, since Google Code will
disappear soon.
- Bump to version release-5-2-122
- Switch to GitHub
- Remove trailing slash from OPENPGM_SUBDIR
- Remove unnecessary python dependencies
- Add a hook to create the missing m4 directory, needed to autoreconf
- Add a hash file
- Rewrap the help text to 72 characters length
- Change the project URL
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
x265 is a H.265 / HEVC video encoder application library, designed to encode
video or images into an H.265 / HEVC encoded bitstream.
http://x265.org
[Peter: use positive logic for CLI option]
Signed-off-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes following problems:
- mips64 toolchain building when UCLIBC_HAS_CONTEXT_FUNCS is enabled
- segfault when SSP and NPTL is used for static binaries
- Updates for ARC and Xtensa
- missing syscalls for fanotify_init() and fanotify_mark() are added
- support for the syncfs() system call added
- problems compiling freeswitch are fixed
- problems running LTP regarding fallocate are fixed
Tested with defconfigs for Qemu arm/ppc/sh/mips/x86/x86_64/xtensa.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow building jq as host utility for use in post-build scripts.
This can be useful to created, edit, merge or even perform syntax checking
on JSON files.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reason for the patch is not entirely clear as it dates back to the
original addition of avahi (in 2006), and it contains no description - But
presumably it is to work around a permission issue with the address files,
similar to what is explained here:
https://bugs.launchpad.net/ubuntu/+source/avahi/+bug/83521
That particular issue got fixed by upstream in 2007 using umask(2):
747f753720
So the patch isn't needed any more and can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gstreamer 0.10 support code seems to have bitrotten as the build fails
with undefined references to various functions:
.obj/qgstreameraudiodecodersession.o: In function `QGstreamerAudioDecoderSession::read()':
qgstreameraudiodecodersession.cpp:(.text+0x13a0): undefined reference to `QGstUtils::audioFormatForBuffer(_GstBuffer*)'
collect2: error: ld returned 1 exit status
Makefile:111: recipe for target '../../../../plugins/mediaservice/libgstaudiodecoder.so' failed
make[6]: *** [../../../../plugins/mediaservice/libgstaudiodecoder.so] Error 1
Makefile:45: recipe for target 'sub-audiodecoder-make_first' failed
make[5]: *** [sub-audiodecoder-make_first] Error 2
make[5]: *** Waiting for unfinished jobs....
.obj/qgstreamercapturesession.o: In function `QGstreamerCaptureSession::probeBuffer(_GstBuffer*) [clone .part.30]':
qgstreamercapturesession.cpp:(.text+0x3fc8): undefined reference to `QGstUtils::bufferToImage(_GstBuffer*)'
collect2: error: ld returned 1 exit status
Makefile:153: recipe for target '../../../../plugins/mediaservice/libgstmediacapture.so' failed
make[6]: *** [../../../../plugins/mediaservice/libgstmediacapture.so] Error 1
Makefile:95: recipe for target 'sub-mediacapture-make_first' failed
make[5]: *** [sub-mediacapture-make_first] Error 2
.obj/qgstreamerplayersession.o: In function `QGstreamerPlayerSession::QGstreamerPlayerSession(QObject*)':
qgstreamerplayersession.cpp:(.text+0xecc): undefined reference to `gst_video_connector_get_type'
.obj/qgstreamerplayersession.o: In function `QGstreamerPlayerSession::processBusMessage(QGstreamerMessage const&)':
qgstreamerplayersession.cpp:(.text+0x5b4c): undefined reference to `QGstUtils::gstTagListToMap(_GstStructure const*)'
collect2: error: ld returned 1 exit status
Makefile:129: recipe for target '../../../../plugins/mediaservice/libgstmediaplayer.so' failed
make[6]: *** [../../../../plugins/mediaservice/libgstmediaplayer.so] Error 1
Makefile:70: recipe for target 'sub-mediaplayer-make_first' failed
make[5]: *** [sub-mediaplayer-make_first] Error 2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since it's automatic via libmnl being present it's just dead code that's
not defined any longer, so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, feh installs into /usr/local. Adjusting the prefix to point
to a system distribution path.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ranger is a console file manager with VI key bindings. It provides a
minimalistic and nice curses interface with a view on the directory hierarchy.
It ships with "rifle", a file launcher that is good at automatically finding
out which program to use for what file type.
http://ranger.nongnu.org
Signed-off-by: Thijs Vermeir <thijsvermeir@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes (works around) #8421
Util-linux has optional systemd support, but we cannot enable it as systemd
depends on util-linux, so that would create a circular dependency.
The systemd unit directory location detection also fails as pkg-config
0.9.12+ prefixes all directory variables with the sysroot, and the configure
script expects to see the target location, so disable that as well for good
measure.
The systemd support doesn't seem to add much, so it isn't a big loss.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add new onvif option
- add new dtls option
- add new openh264 option
- add new x265 option
- removed real plugin option
- add new rtp option
- remove always disabled legacy options: directdraw, osx_video,
quicktime and mythtv
- add '--disable-bs2b' and '--disable-libde265' to options
which require currently unpackaged libraries
- add '--disable-gtk3' and '--disable-qt'
[Thomas: improve wording of Config.in.legacy option.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 8f1c4c49a2 (ltp-testsuite: don't link with libtirpc)
ltp-testsuite does not need libtirpc. Don't select it.
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Romain:
- Wrap Config.in help text at 72 columns.
- Move sdl2 package after sdl modules in Config.in. (Arnout)
- Explicitly disable dbus and wayland.
- Remove double underscore (SDL2__*).
- Unify autotools options to use --enable/--disable.
- Use x-includes and x-libraries to avoid path poisoning.
- Remove xlib_libXrender, xproto_inputproto and xproto_scrnsaverproto
dependencies since the build system doesn't depend on them.
- Add Xlib_libXi, xlib_libScrnSaver and xlib_libXxf86vm dependencies.
- Handle autotools options (--enable/--disable) for each X11
dependencies.]
[Thomas:
- Minor tweaks to Config.in
- Addition of hash file.
- Addition of SDL2_CONFIG_SCRIPTS, as suggested by Vincent Stehlé.]
Signed-off-by: Guillaume GARDET <guillaume.gardet@oliseo.fr>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 1.5, maintainer mode is enabled by default. We don't need
this, and is in particular problematic because it requires bison 3.0.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency reasons, this commit adjusts the noip package to pass
$(TARGET_MAKE_ENV) in the environment when calling $(MAKE).
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erlang can be built without threads support, by passing an
appropriate config option.
This commit drops the config dependency on BR2_TOOLCHAIN_HAS_THREADS
and instead passes --disable-threads if the toolchain doesn't support
threads.
While here, change the wording of the config comment to "dynamic
library" to be consistent with similar comments elsewhere.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency reasons with other packages, let's pass
$(TARGET_MAKE_ENV) in the environment when calling $(MAKE).
[Thomas: improved commit log.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And also add a trailing slash to the URL.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We switched to our mirror because because the official site started to
fail, but now it works again.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option --enable-video-directfb=no was being assigned to
SDL_CONF_OPTS instead of being appended to it when
BR2_PACKAGE_SDL_DIRECTFB was disabled. That would clobber any options
previously added to SDL_CONF_OPTS (namely --enable-video-fbcon=yes|no).
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For targets prepared with a usr-move, coreutils should not be attempting
to move binaries from `usr/bin` to `bin`.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch depends on http://patchwork.ozlabs.org/patch/512480/
and adds sftp support to the virtual filesystems supported by Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb has full support for aarch64 since version 7.6,
current minimum is 7.7.1.
Target build was re-enabled over a year ago, but host-gdb was not.
Related commits:
0e49733b30 gdb disabled for aarch64
4372449a4f target-gdb re-enabled
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tstools has migrated to GitHub, so let's use this opportuninty to rework
this package as well.
- Change site to GitHub.
- No releases of tags yet, so let's use the latest commit ID from the
master branch as a version.
- There is currently no license file attributed to tstools, so state that
in the tstools.mk file and add empty license file variable. This issue is
being tracked upstream: https://github.com/kynesim/tstools/issues/32
- Wrap the help text in the Config.in to 72 characters, and also change
the project URL to the GitHub one.
- Add a hash file.
- Rename the patch to use a four digit numbering (001 -> 0001).
[Peter: leave license as MPLv1.1, adjust comment to match]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to github homepage and site.
Drop patch, it's not required any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to github homepage and site.
Package is now autotools-based.
libc patch no longer required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to github homepage and site.
Package is now autotools-based.
musl tweak no longer required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We add a new version, because it is not API-compatible with the previous
versions.
Also, nodejs-4.1.2 requires gcc >= 4.8.
Forward-port patches from 0.12.7:
- 0001-Remove-dependency-on-Python-bz2-module.patch partially applied
upstream;
- 0002-gyp-force-link-command-to-use-CXX.patch slightly refreshed;
- 0003-Use-a-python-variable-instead-of-hardcoding-Python.patch
largely refreshed to address new occurences of hard-coded calls;
- 0004-fix-build-error-without-OpenSSL-support.patch applied upstream
- 0005-Fix-typo-for-arm-predefined-macro-in-atomicops_inte.patch
applied upstream.
New patch:
- 0004-fix-arm-vfpv2.patch to fix the gcc -mfpu option for VFPv2.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Martin Bark <martin@barkynet.com>
Cc: Jaap Crezee <jaap@jcz.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On ARM, starting with v0.12.x, the V8 JS engine is now requires at least
an armv6 and at least a VFPv2.
Since we're about to introduce the v4.x version, which has the same
requirements, introduce an intermediate variable to hold that condition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Martin Bark <martin@barkynet.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow the `ntptime` utility to be included on a target.
[Peter: add comment why AUTORECONF is needed]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
External toolchain use requires a static libc (as buildroot uses
`gcc --print-file-name libc.a` to find the sysroot); thus, the static portion
of a musl build should not be conditional.
Signed-off-by: Charles Duffy <chaduffy@cisco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CONFIG_UBOOT needs libz [1]. So CONFIG_UBOUT mustn't be available when
HAVE_ZLIB=n.
Add patch from upstream to fix a link error for CONFIG_UBOOT and missing libz.
Note, that this link error does not affect the default config provided by
Buildroot.
[1] cf495e23ad
[Thomas: use a single <pkg>_PATCH variable.]
Reported-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchains used in Buildroot (x86-64 and mips64) have a problem to compile
a set of object files into one object file as it is done for the
`builtin-target` declared in swupdate's Kbuild Makefile.build. This target
collects all object files from every subdirectory declared in `objs-dir` and
compiles them into a single object file named `build-in.o` using the linker ld.
For the addressed toolchains the default emulation of ld is not the correct one
leading to different kind of relocation errors:
/usr/bin/i686-pc-linux-gnu-ld: Relocatable linking with relocations from
format elf64-x86-64 (core/swupdate.o) to format elf32-i386 (core/built-in.o)
is not supported.
or
/usr/bin/mips-linux-gnu-ld: handlers/raw_handler.o: endianness incompatible
with that of the selected emulation
or
/usr/bin/mips64el-linux-ld: core/swupdate.o: ABI is incompatible with that
of the selected
As there is no need to have single object file `built-in.o` to be compiled for
the subdirectories core and handlers we can easily allow swupdate to be built
with these toolchains by compiling the source files from core and handlers with
the `lib-target` target by assigning them to the `libs-y` variable as it is done
for all other subdirectories. The `lib-target` compiles a set of object files
into one archive file. With this target we avoid using the ld linker and use the
ar archiver instead.
Add a patch from upstream to fix a whole bunch of autobuild errors.
Fixes:
http://autobuild.buildroot.net/results/de9/de920298075d32f3de83a0cfb7417846eb833425/http://autobuild.buildroot.net/results/975/975915aa33005806e78260bae385cd4b3e359ca8/http://autobuild.buildroot.net/results/c54/c54e7a2ea353d95d41a1e966de0dffa7b6ac432e/http://autobuild.buildroot.net/results/019/0198596ebfed05ab86552b628da2274d55bf42ae/
and many more.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lots of changes, add support for libnfs, udev, libbluray, cleanup afp
support, gtk3, and systemd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prerequisite for the gvfs 1.26.1.1 bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In iptables versions 1.4.20 and 1.4.21, any call to iptables
would generate a message
cannot open connlabel.conf, not registering 'connlabel' match: No
such file or directory
This problem was reported at [1] and subsequently fixed with commit [2], but
no upstream release has been made since. This patch imports the fix into
Buildroot, awaiting a new release of iptables.
[1] http://marc.info/?l=netfilter-devel&m=140990442432002&w=2
[2] http://git.netfilter.org/iptables/commit/?id=825fbda5482a7d5ec5a6619c81fe07ff865c7d6e
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch site to gnu mirror since the stable releases are mirrored there.
Also use gpg sig to calculate hash, from the gnu mirror.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting from uClibc 0.9.32 "test_compile" target builds tests flawlessly.
For 0.9.31 it lead to build failure, but now when AVR32 support was dropped
I think this change worth applying.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- always disable new gio_unix_2_0 option (only used for testing)
[Thomas: add comment in .mk file.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
syslog-ng is an enhanced log daemon, supporting a wide range of input
and output methods: syslog, unstructured text, queueing, SQL & NoSQL.
[Thomas:
- Rewrap Config.in.help text
- Pass --pidfile option when starting syslog-ng so that its PID file
is created in /var/run/syslog-ng.pid, which allows
start-stop-daemon to actually stop syslog-ng. Without this,
S01logging was not able to stop syslog-ng.
- Pass the executable path at stop time in S01logging, so that
start-stop-daemon can check we're not incorrectly stopping
something completely different.
- Add busybox as a dependency of syslog-ng if busybox is enabled,
since we want to override Busybox's S01logging init script.
- Simplify the python condition, since python and python3 are
mutually exclusive.
- Rewrap the comment above SYSLOG_NG_FIXUP_CONFIG.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DVBlast is a simple and powerful MPEG-2/TS demux and streaming
application.
[Thomas:
- add missing hash file.
- rewrap Config.in help text
- remove unneeded "DVBLAST_INSTALL_TARGET = YES", since this is the
default behavior
- pass TARGET_MAKE_ENV in the environment when calling make.
- use TARGET_CONFIGURE_OPTS instead of just CC/LD.]
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BiTStream is a set of headers to ease processing of mpeg ts
streams. It is used by dvblast.
[Thomas:
- add missing hash file.
- add missing BITSTREAM_LICENSE_FILES information.
- rewrap Config.in help text.
- use lowercase name for the package in the comment header in
bitstream.mk.]
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit does a number of fixes to the inadyn package to make it
work properly "out of the box":
* inadyn is installed in /usr/sbin, not /usr/bin, so we fix the path
in the init script
* Use "printf" for the Starting and Stopping messages, so that the OK
/ FAIL stay on the same line.
* Pass the -q option to the start sequence, since it's passed in the
stop sequence.
* Fix the configuration file to use an existing dyndns_system and
avoid a failure at startup.
* Use a variable called ENABLED in /etc/default/inadyn to decide
whether to start the service or not. By default, it is not started,
as suggested by Gustavo, and an explicit ENABLED="yes" is needed.
* Store the PID file in /var/run/inadyn.pid, like we do for all other
daemons.
[Thomas: drop silly comment about uncommenting the alias line in the
configuration file, which is already uncommented. Noticed by Yann.]
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we are always explicitly passing gcc_cv_libc_provides_ssp,
there is no longer any reason to modify the gcc configure/configure.ac
to take into account the musl case. When a musl toolchain is being
built, BR2_TOOLCHAIN_HAS_SSP is always 'y', and therefore
gcc_cv_libc_provides_ssp=yes is always passed when building
gcc-initial and gcc-final.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the gcc-initial build, we already pass
gcc_cv_libc_provides_ssp=yes explicitly when SSP support will be
available in the C library: at this point in time the C library is not
yet built, so gcc cannot detect if it will support SSP or not.
However, it turns out that there are some situations for which it is
also useful to tell gcc explicitly whether the SSP support is
available or not: the gcc logic to decide whether uClibc has SSP
support or not is broken since uClibc-ng bumped the glibc version it
pretends to be.
So, this commit makes sure that we explicitly pass
gcc_cv_libc_provides_ssp both to gcc-initial and gcc-final, and that
we're always passing either 'yes' or 'no'.
Fixes:
http://autobuild.buildroot.org/results/778/778e6309ba834cc70f8243a4f6c664c0bcaeb7c5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Musl doesn't implemented wmtp, and its utmp support is not sufficient
to build the latest versions of Busybox, so let's disable wtmp and
utmp support in Busybox for musl toolchains.
We re-use an existing define BUSYBOX_INTERNAL_SHADOW_PASSWORDS that
was used to do some musl-related tweaks to the Busybox configuration
around shadow password functions, and extend it to also do the
utmp/wtmp tweaks. In the process, we rename the define to
BUSYBOX_MUSL_TWEAKS.
Note that BUSYBOX_KCONFIG_FIXUP_CMDS continues to call
BUSYBOX_INTERNAL_SHADOW_PASSWORDS because there is another definition
of this macro under other conditions.
Fixes:
http://autobuild.buildroot.org/results/b96/b96ffad13bca5e6fbf7ce79538aacbfe27b1eff3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the already existing fix for EGL/X11 header issue to fix
an additional problem encountered on my system where I had
compile errors in qeglplatformscreen.cpp. The problem was related
to the wrong order of includes. The X11 headers must always be
included last, as indicated in
http://lists.qt-project.org/pipermail/development/2013-March/010511.html
The fix is done in the existing 0003-xcb-egl-fixes.patch patch, since
it is an additional fix for the same problem.
[Thomas: tweak commit log, and adjust SoB details as suggested by
Arnout.]
Signed-off-by: Marc Andre <marc.andre@netline.ch>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Grab the content of BR2_PACKAGE_FFMPEG_EXTRACONF after guessing the CPU,
so the user will still have the possibility to override it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ofono's service file was not being installed when systemd was selected
as the init system.
Without ofono.conf in /etc/dbus-1/system.d, ofonod cannot take its
dbus name on the system bus and will fail to start with a permission
denied error.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without connman.conf in /etc/dbus-1/system.d/, connmand cannot take
its name on the dbus system bus and will fail to start with a
permission denied error.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable libcdio and libilbc since they are incompatible with ffmpeg.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In librtmp/Makefile the variable CRYPTO defaults to OpenSSL. When
building with GnuTLS support instead, librtmp.pc includes wrong
libraries:
$ grep Req output/staging/usr/lib/pkgconfig/librtmp.pc
Requires: libssl,libcrypto
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_GNUTLS=y
BR2_PACKAGE_RTMPDUMP=y
Pass RTMPDUMP_CRYPTO also to INSTALL_*_CMDS to fix this problem.
Patch supposed by Thomas:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/129525
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added back the hash as it was discussed during the last Buildroot Dev
Days.
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a hash file - github release tarballs are considered stable now.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turned out one of the previous fixes (required to build Linux
kernel)
------------------>8-------------------
ARC Binutils: a65b844aed
Buildroot: http://git.buildroot.net/buildroot/commit/?id=2d4e2e238a0ea9395152ae71d882d79b1f35094c
------------------>8-------------------
broke building of some other software packages.
In particular perf built for ARCv2 had corrupted .plt entries that lead
to immediate crash on perf execution.
That's an example of normal .plt entries:
------------------>8-------------------
< 1-st PLT entry >:
12c24: 30 27 8c 7f 0d 00 74 95 ld r12,[pcl,0x000d9574]
12c2c: 21 20 00 03 j.d [r12]
12c30: 0a 24 c0 1f mov r12,pcl
< 2-nd PLT entry >:
12c34: 30 27 8c 7f 0d 00 68 95 ld r12,[pcl,0x000d9568]
12c3c: 21 20 00 03 j.d [r12]
12c40: 0a 24 c0 1f mov r12,pcl
------------------>8-------------------
Note right after jump in its delay-slot r12 gets set with current value
of program counter. This is required for the first symbol resolution,
see implementation of _dl_linux_resolve here:
http://git.uclibc.org/uClibc/tree/ldso/ldso/arc/resolve.S#n46
And that's what we got in .plt after mentioned fixes:
------------------>8-------------------
< 1-st PLT entry>:
13384: 30 27 8c 7f 0f 00 84 75 ld r12,[pcl,0x000f7584]
1338c: 21 20 00 03 j.d [r12]
< 2-nd PLT entry>:
13390: 30 27 8c 7f 0f 00 78 75 ld r12,[pcl,0x000f7578]
13398: 21 20 00 03 j.d [r12]
------------------>8-------------------
Note r12 setup is missing.
That happened because linker thought the size of PLT entry is 12 bytes
(which is exactly the size of PLT entry for ARCv1, read ARC750/770)
while for ARCv2 PLT entry is 16-bytes long. And erroneously trailing 4
bytes were truncated.
Current commit fixes this misbehavior and PLT gets generated properly
again.
Now we have a fix for that issue, see
5df50c6108
This fix is in arc-2.23-dev branch and will be a part of the next
release of ARC tools, so then this patch must be removed from buildroot.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a global instrumentation hook that collects the list
of files installed in $(TARGET_DIR) by each package, and stores this
list into a file called $(BUILD_DIR)/packages-file-list.txt. It can
later be used to determine the size contribution of each package to
the target root filesystem.
Note that in order to detect if a file installed by one package is
later overriden by another package, we calculate the md5 of installed
files and compare them at each installation of a new package.
Collecting the list of files installed by each package is done
unconditionally, as tests have shown that the performance impact of
doing this is negligible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Ryan Barnett <ryanbarnett3@gmail.com>
Tested-by: Ryan Barnett <ryanbarnett3@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autoreconf is not necessary anymore.
WavPack "autodetects" CPU type to enable ASM code. However, the assembly code
for ARM is written for ARMv7 only and building WavPack for an ARM-non-v7
architecture will fail. We explicitly enable ASM for the supported
architectures x86, x64 and ARMv7 and disable it for all others.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If an externally built (non-Buildroot) toolchain also wraps the toolchain
executables, there is a risk that it will also use the '.real' extension.
To minimise this risk, use a more buildroot-specific extension instead:
'.br_real', so we can detect that the external toolchain is built using
Buildroot and get to the raw toolchain binaries.
[Peter: reword description]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-5291 - Remote attack on clients using session tickets or SNI
Also includes countermeasures against Lenstra's RSA-CRT attach for
PKCS#1 v1.5 signatures (1.2.16) and the Logjam attack (1.2.15).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some machines, the network interface is slow to appear. For example,
on the Raspberry Pi, the network interface eth0 is an ethernet-over-USB,
and our standard boot process is too fast, so our network startup script
is called before the USB bus is compeltely enumerated, thus it can't
configure eth0.
Closes#8116.
[Peter: move to S40network, handle multiple interfaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch that fixes a sysfs path in br_set.
The patch is on top of the latest release 1.5, which already dates from
2011.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disabling sconesite image isn't enough to avoid imagemagick
autodetection, and if it's present in the host (distro) but not in the
target it gets automatically picked up. Fixes:
http://autobuild.buildroot.net/results/377/37705926f3023395c54af0532ff95f0125fbaa66/
Also add a comment about autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
apng and tdsc are enabled by default, but they need zlib, otherwise the
compilation will fail with an error like this one:
libavcodec/pngdec.c:35:18: fatal error: zlib.h: No such file or
directory
#include <zlib.h>
^
compilation terminated.
So add an autodep on BR2_PACKAGE_ZLIB to enable or disable support for
apng and tdsc accordingly.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b1dcb1c2 a fix was attempted at fixing a build failure where
sqlcipher finds the distribution tcl and tries to build against it.
sqlcipher has two tcl usage scenarios: host-tcl which is required to
actually build it, and target tcl to build bindings.
Since cross-compilation of the bindings isn't clean it fails as well,
and since it wasn't a feature before either just disable it completely,
since the wrong fix makes the sqlcipher build failures worse.
Fixes:
http://autobuild.buildroot.net/results/fc0/fc0528de7fed2f34f503fe8dd8b4c21ded0d6dff/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed by Rich Fekler on IRC the basic hush shell is pretty much
useless since it doesn't support if conditionals, loops, functions, case
or even interactive mode.
So enable the full feature-set.
Size delta: +10184 bytes uncompressed for blackfin fdpic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise if the host distro has net-snmp devel files sane-backends will
find /usr/bin/net-snmp-config first and the build will break. Fixes:
http://autobuild.buildroot.net/results/c38/c381c316907964787ebe1a0807399022f15d8158/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pango-querymodules is deprecated/removed, so ditch the initscript.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: use SHARED_STATIC_LIBS_OPTS to simplify the logic.]
Signed-off-by: Charles Duffy <chaduffy@cisco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the host has oniguruma installed then slang can detect it and try to
(wrongly) link against it resulting in build failure. Fixes:
http://autobuild.buildroot.net/results/51f/51ff079ebbd363e0445d226ec80bc28e524fd88c/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tools for building AXFS Filesystem.
The Advanced XIP File System is a Linux kernel filesystem driver that
enables files to be executed directly from flash or ROM memory rather
than being copied into RAM. It has the ability to store individual
*pages* in a file uncompressed/XIP or compressed/Demand Paged.
Source:
https://github.com/jaredeh/axfs
[Thomas:
- add hash file.
- use $(INSTALL) -D -m 0755 instead of cp for installing mkfs.axfs.]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports upstream gpsd commit
3e25e2167beb3936de3986fad9b6c9bdec82b81f, which fixes the build of the
NMEA driver.
Fixes Buildroot bug #8401, reported by kevin.alden2@gmail.com.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd is increasingly expecting things to live in /usr/bin, /usr/sbin
or /usr/lib nad not in /bin, /sbin or /lib. It has inherited those
expectations from a Fedora change:
https://fedoraproject.org/wiki/Features/UsrMove
Note however, that systemd does support /usr being on a separate
filesystem; it just expects an initramfs to mount it before the final
switchroot over to the actual rootfs.
But the traditional use-case for Buildroot is not to boot with an
initramfs; although that is totally feasible, that's probably not what
is commonly done in the vast majority of cases.
However, a lot of packages still install stuff directly into /bin,
/sbin or /lib, which systemd may need early-on in the boot process,
even before it may have a chance to mount /usr. Even though we can
tell systemd, at configure-time, where it should expect programs to
be at runtime, it does not make sense to go head-first against an
upstream wa^Hill.
Add an option so that /bin, /sbin and /lib be symlinks to /usr/bin
and /usr/sbin. That option is forcibly enabled when the init system
is systemd.
Note: we need not handle /lib32 or /lib64, as they already are symlinks
to /lib, which means they will automatically be redirected to /usr/lib,
as /usr/lib32 and /usr/lib64 already are.
Furthermore, this means we're no longer supporting a split-usr setup, so
the corresponding configure options have been removed as well for
systemd and, when using a merged /usr, for eudev as well.
In Buildroot, we decided (with this patch) not to support a split-usr
when systemd is used as an init system. This is a design decision, not
a systemd issue. Thus the select is with BR2_INIT_SYSTEMD rather than
with BR2_PACKAGE_SYSTEMD.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd seems to do its release using their github repository up from
the 221 version.
Since they use the auto generated release, we can't have a hash file.
They don't provide the Makefile.in file in the 'po' directory.
We need to run intltoolize so it's created for us.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DSP support depends on the core implementation, not on the ISA, so
enabling it for mips64r2 is not correct since you can build a mips64r2
core without DSP support.
Disable mipsdspr1 and mipsdspr2 options by default and let the user
enable them via the BR2_PACKAGE_FFMPEG_EXTRACONF kconfig option, which
will take preference and override the default values.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch from ftp to http, it's better for firewall-laden places.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disabled vala bindings since they're not used by the current buildroot
packages and it requires gobject-introspection which we don't provide
yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pypcap calls thez pyrexc Python script directly. This script is
generated by the pyrexc installation with a shebang line that has a
full path to our host-python interpreter. Unfortunately, since Linux
cuts the shebang line at 128 characters, it means that if you have an
output directory with a very very long name, the pyrexc script does
not run.
To solve that, we explicitly invoke pyrexc with the python2
interpreter.
Note that invoking the python2 interpreter directly is safe because
python-pypcap is only available for Python 2.x, so we are just that
$(HOST_DIR)/usr/bin/python2 is available.
Fixes#8281.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable CONFIG_FEATURE_SYNC_FANCY in the busybox.config because that
option causes build failures for any uClibc based toolchains since it
requires syncfs() support, which doens't exist in uClibc.
This new option has been introduced in 1.24.0, so despite of disabling
it, we are not losing anything that we had before.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, the liquid-dsp configure script looks at the current CPU
to find which x86 CPU extensions are supported. Those checks use
AC_TRY_RUN(), which cannot work in a cross-compilation environment,
and would anyway be wrong.
To fix this, we explicitly pass the appropriate ac_cv_have_<foo>_ext
autoconf cache variables.
Fixes:
http://autobuild.buildroot.org/results/eb0/eb002463ed82de461fae11211415c07883a95386/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
eventlog is a library for creating structured events from
applications, and is the workhorse behind syslog-ng's own messages.
[Thomas:
- fix alphabetic ordering in package/Config.in, as noticed by
Vicente.
- rewrap Config.in help text and add some URL as a reference (though
the eventlog project doesn't seem to have a real web page)
- remove useless slash at the end of EVENTLOG_SITE
- make the license info more specific: it's a BSD-3c license
- add a hash file.]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- add qt, qt5base/qt5gui/qt5widgets dependency for qv4l2
(qt dependency was missing, qt5 support was added since 1.8.0)
- fix fix moc/rcc/uic detection in case host versions
of moc-qt5, rcc-qt5 or uic-qt5 are present
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: minor adjustments to make the script look more like our
standard init scripts.]
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: slightly tweak the comments.]
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches that have been applied upstream and adapt the other
ones.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Filter out all other uClibc versions, as they containing
serious bugs for mips64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building in a static only configuration with guile package
enabled, the following error happens:
gc_pthread_redirects.h:37:22: fatal error: dlfcn.h: No such file or
directory
# include <dlfcn.h>
The file gc_pthread_redirects.h comes from bdwgc, which gets built
before make in the autobuild test case indicated below. This header
file is known to incorrectly include <dlfcn.h>, unless GC_NO_DLOPEN is
specified.
IF GC_NO_DLOPEN is defined, another issue arises due to libguile and
libintl both defining locale_charset.
We could have kept the guile support enabled only on dynamic library
configurations, and disable it only for static library
configurations. However, the need for guile support in make on the
target seems highly unlikely, so we'd better simply disabling guile
support, which this commit does.
Fixes:
http://autobuild.buildroot.net/results/814/8143ae0afac139845e5016058d85c800dc8527ad
[Thomas: tweak commit log.]
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These changes allow debugging multithreaded NPTL xtensa applications and
inspect TLS variables.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable libsanitizer for sparc64, too. Same problem as for
sparc, see https://bugs.busybox.net/show_bug.cgi?id=7951
Reported-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Dbus is an optional dependency for tvheadend:
9c7b6047d2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GPU package now includes libraries for GPU2D as well as several tools to
monitor and debug the GPUs.
GPU2D libraries have been tested with the example provided in the
package:
# /usr/share/examples/fsl-samples/g2d/overlay_test/g2d_overlay_test
Overlay rendering time 53861us .
The tools have been tested with the following commands:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7 &
# gmem_info
... display memory use per PID ...
# killall tutorial7
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
[Thomas: tweak the installation logic to be more explicit about paths
being copied, and to use cp -dpfr consistently.]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PCI support needs to be checked since this driver is based
on it. Otherwise the build fail with:
#error "This driver requires PCI support to be available"
But this message is concealed by several occurrence of this
one:
error: implicit declaration of function 'pci_find_bus' [-Werror=implicit-function-declaration]
[Thomas:
- fix minor typo in Config.in: s/Enthernet/Ethernet/
- license is "GPLv2, BSD-3c", not "GPLv2 or BSD-3c"
- remove IQVLINUX_PCI_CHECK, until a proper generic solution is
implemented.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To detect X11 support dbus uses the autoconf macro AC_PATH_XTRA
http://cgit.freedesktop.org/dbus/dbus/tree/configure.ac#n1264
This macro checks for the optional presence of libICE:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=blob;f=lib/autoconf/libs.m4;h=d2040d731f81fc1693e01d118c45d51ad169d56a;hb=HEAD#l472
quoting dbus configure with libICE not present:
checking for IceConnectionNumber in -lICE... no
quoting dbus configure with libICE being present:
checking for IceConnectionNumber in -lICE... yes
The binary usr/bin/dbus-launch is being linked to libICE and libSM if
the packages are available:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a
output/target/usr/bin/dbus-launch | grep NEEDED
0x00000001 (NEEDED) Shared library: [libdbus-1.so.3]
0x00000001 (NEEDED) Shared library: [libSM.so.6]
0x00000001 (NEEDED) Shared library: [libICE.so.6]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.1]
To get a reproducable build add libSM as optional dependency to dbus,
libSM pulls in the dependency to libICE.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add support for mips32r6 and mips64r6 target architecture variants
- Disable unsupported gcc versions
- Disable unsupported binutils versions
- Disable unsupported external toolchains
- Disable unsuported C libraries
- Add a hook in order to make glibc compile for MIPS R6.
[Thomas: slightly tweak the glibc hack explanation, to make it
hopefully clearer.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new configure option '--disable-runtime-tests' and use it do
disable runtime tests which fail to compile on some uclibc
configurations.
Fixes [1], [2]:
test-libevdev-init.c: In function 'test_set_clock_id':
test-libevdev-init.c:493: error: 'CLOCK_MONOTONIC_RAW' undeclared (first use in this function)
and compile failure for !BR2_USE_MMU configuration:
test-main.c:(.text+0x8): undefined reference to `_fork'
[1] http://autobuild.buildroot.net/results/0d0/0d0a987471ce8e9f76fc96e0ae8f0bfeadb45028/
[2] http://autobuild.buildroot.net/results/939/9392033f1b8d2c8e4e8791c90918dabbe28a7067/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From [1]:
A couple of cleanups, one notable fix: we now transparently fix invalid
ABS_MT_TRACKING_ID ranges to something sensible.
The touchpad-edge-detector tool prints out suggested hwdb rules for
resolution overrides. And since the resolution is the main thing to fix on a
device, the libevdev-tweak-device now has a --resolution argument to quickly
set the resolution on the x/y axes.
[1] http://lists.freedesktop.org/archives/input-tools/2015-August/001210.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- replicate the ffmpeg "depends on" related to the broken NIOS2
toolchains to the BR2_PACKAGE_SQUEEZELITE_FFMPEG option.
- use the github helper function.
- add hash file.]
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The main .service file is installed by audit.
We are using tmpfiles mechanisms to create the log directory, which
would not exists otherwise since /var/log points to /tmp
[Thomas: add explicit --disable-systemd when systemd is not used.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch as it was merged in this release:
https://fedorahosted.org/audit/changeset/1117
[Thomas: remove autoreconf, no longer needed.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add patch to fix autoreconf issue, and use LIQUID_DSP_AUTORECONF =
YES instead of an horrible hack calling aclocal/autoconf manually.
- use the github macro instead of hand-coding <pkg>_SITE and
<pkg>_SITE_METHOD. This allows to remove <pkg>_SITE_METHOD
entirely.
- use a full hash as the <pkg>_VERSION
- remove trailing whitespace everywhere.
- use one single assignment of LIQUID_DSP_CONF_OPTS
- fix the comment about the eglibc/musl dependency (it was only
mentioning eglibc, and the condition was inverted)
- add the musl/glibc dependency on the package option itself
- make the package depend on dynamic library support, since the
makefile unconditionally builds a shared library.
- add hash file.]
Signed-off-by: Guillaume William Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix typo for arm predefined macrco in (__ARM_ARCH_6KZ__
vs. __ARM_ARCH_6ZK__) in atomicops_internals_arm_gcc.h
Fixes#8391: Node.js 0.12.7 fails to build on raspberry_pi defconfig
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, nl80211 support is conditionnal with libnl being enabled,
using implicit dependencies. This causes problems since it is not
obvious and wpa_supplicant without nl80211 isn't what most user expects.
If nl80211 isn't enabled, then buildroot only enables the wext driver,
which will only work if some deprecated kernel feature isn't left
disabled, or if using a outdated out-of-tree linux driver which doesn't
use the cfg80211 infrastructure.
This makes nl80211 support an explicit option, which
"select BR2_PACKAGE_LIBNL" accordingly. To handle upgrades nicely, it
would have been nice to have "default y if BR2_PACKAGE_LIBNL", but
Kconfig treats this as a circular dependency. So instead, this enables
the option by default, which is less worse than not enabling nl80211
when it was previously implicitely enabled.
[Thomas:
- rewrap Config.in help text
- add comment about thread dependency.]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to remove '/home/ftp' and the ftp user from the 'skeleton'
package, we need to add the creation of the ftp users to the package so
it still work out of the box (with an anonymous user).
[Thomas:
- remove the VSFTPD_FIX_HOME_PERMISSIONS variable, and simply put the
additional command in VSFTPD_INSTALL_TARGET_CMDS.
- slightly tweak the comment.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to remove '/home/ftp' and the ftp user from the 'skeleton'
package, we need to add the creation of the ftp users to the package so
it still work out of the box (with an anonymous user).
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- add AMD GPU driver (available since 2.4.63)
- freedreno is no longer experimental (since 2.4.59)
- add NVIDIA Tegra driver (available since 2.4.59)
- update help texts (install vs. installs, change to complete
sentences)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is necessary to move efl packages to package directory
and prepare the efl version bump to the latest release.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package media-ctl is out-dated, source (and developement) have been moved
to v4l-utils since June 2014. Up-to-date version is available in
the libv4l package (BR2_PACKAGE_LIBV4L/BR2_PACKAGE_LIBV4L_UTILS).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- add missing include, fixes:
fbio.cpp:33:8: error: ‘fd_set’ does not name a type
static fd_set fds;
improxy.cpp:439:3: error: ‘fd_set’ was not declared in this scope
- add missing WAIT_ANY define, fixes:
fbterm.cpp: In member function ‘void FbTerm::processSignal(u32)’:
fbterm.cpp:212:22: error: ‘WAIT_ANY’ was not declared in this scope
s32 pid = waitpid(WAIT_ANY, 0, WNOHANG);
Fixes:
http://autobuild.buildroot.net/results/ab2/ab2334700b44bac233994b76f2acf1795f0
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the following recursive dependency:
package/python/Config.in:5:error: recursive dependency detected!
package/python/Config.in:5: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_GNURADIO_PYTHON
package/gnuradio/Config.in:46: symbol BR2_PACKAGE_GNURADIO_PYTHON is selected by BR2_PACKAGE_GNURADIO_UTILS
package/gnuradio/Config.in:55: symbol BR2_PACKAGE_GNURADIO_UTILS depends on BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS
package/python-numpy/Config.in:1: symbol BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS depends on BR2_PACKAGE_PYTHON
by replacing the "select BR2_PACKAGE_PYTHON" by a "depends on
BR2_PACKAGE_PYTHON", and ditto for the BR2_PACKAGE_GNURADIO_PYTHON
selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some gnuradio python blocks need python-numpy to be present. Without
python-numpy, gnuradio-python based apps fails, on runtime, with
traceback like:
Traceback (most recent call last):
File "./top_block.py", line 18, in <module>
from gnuradio import analog
File "/usr/lib/python2.7/site-packages/gnuradio/analog/__init__.py", line 35, in <module>
from am_demod import *
File "/usr/lib/python2.7/site-packages/gnuradio/analog/am_demod.py", line 22, in <module>
from gnuradio import gr
File "/usr/lib/python2.7/site-packages/gnuradio/gr/__init__.py", line 44, in <module>
from top_block import *
File "/usr/lib/python2.7/site-packages/gnuradio/gr/top_block.py", line 30, in <module>
from hier_block2 import hier_block2
File "/usr/lib/python2.7/site-packages/gnuradio/gr/hier_block2.py", line 26, in <module>
import pmt
File "/usr/lib/python2.7/site-packages/pmt/__init__.py", line 58, in <module>
from pmt_to_python import pmt_to_python as to_python
File "/usr/lib/python2.7/site-packages/pmt/pmt_to_python.py", line 22, in <module>
import numpy
ImportError: No module named numpy
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Opencv3 select python-numpy. To avoid duplicating architecture
dependencies, an hidden variable has been added to python-numpy
package. This patch propagate this modification to the opencv3
package.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages selects python-numpy. This package has a some CPU specific
code. To simplify and avoid duplicate dependencies this patch introduce an
hidden ARCH_SUPPORTS variable.
[Thomas: fix the definition of the new option to make sure its value
is actually 'y' when a supported architecture is used.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump to version 2.0
- Switch the download site to GitHub
- Apply an upstream patch to fix a missing define
- Add a hash file
- Rewrap the help text to 72 characters length
- Change the official website
[Thomas: fix s/MAKE_ENV/TARGET_MAKE_ENV/.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-5289: json or jsonb input values constructed from arbitrary
user input can crash the PostgreSQL server and cause a denial of
service.
CVE-2015-5288: The crypt() function included with the optional pgCrypto
extension could be exploited to read a few additional bytes of memory.
No working exploit for this issue has been developed.
sparc build fix patch upstream so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to enable JIT support on ARM, webkitgtk24 currently looks at
BR2_ARM_ENABLE_NEON, which is not correct: BR2_ARM_CPU_HAS_NEON should
be used instead.
The BR2_ARM_ENABLE_NEON is only visible for cores that select
BR2_ARM_CPU_MAYBE_HAS_NEON, in order to allow to specify if his
particular SoC has chosen to integrate NEON or not. And if so,
BR2_ARM_CPU_HAS_NEON gets selected.
BR2_ARM_CPU_HAS_NEON is in fact selected in two different ways:
- Either directly by the CPU core selection, if NEON is mandatory in
this CPU core.
- Or by BR2_ARM_ENABLE_NEON, for CPU cores where NEON support is
optional.
So really, BR2_ARM_CPU_HAS_NEON is what should be used by packages.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most code is GPLv2+ or compatible except for one file that is
GPLv2-only, hence as a whole is GPLv2 (see Copyright).
Also kill some whitespace and make the only hard dependency
(host-pkgconf) a hard dependency, not an addition, since it's not
conditional.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump version to 1.0.25
- Update hash file. The hash value provided by the alioth.debian.org URL
is wrong, so use the one provided by www.sane-project.org. I have
reported this upstream.
- Remove unnecessary patches:
0002-remove-unsafe-headers-path.patch
0003-remove-cups-and-systemd-support.patch
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump to version 2.6.1.
- Update hash file.
- Remove includes hooks since they are no longed needed.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the upgrade to pkgconf 0.9.12 all directories and variables with
directories are sysroot-prefixed, whereas with the old patch only some
variables were (includedir, mapdir, sdkdir, libdir).
libglib2 uses a giomoduledir=${libdir}/gio/modules variable in
gio-2.0.pc, which when expanded via sysroot by pkgconf at configure time
points to the staging directory (via libdir expansion).
When target install gets called the gio module gets installed to staging
rather than target, with the obvious consequences this has.
Work-around this pkgconfig abuse by overriding GIO_MODULE_DIR at target
install time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2015-4491 already fixed in the release so drop patch.
Fixes a heap overflow with a gif file and a heap overflow and DoS with a
tga file. CVEs not assigned yet.
Tests disabled since they fail to build properly on uClibc toolchains.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turns out that uClibc only enables the long double math functions
for some architectures (god know why, so what if long double is the
same as double, these functions should still be defined). Since
python-numpy links with those functions, the module will fail to load
on ARM, MIPS and SH.
However, python-numpy actually checks for each function if it is really
available. Only, it overrides that check for ldexpl and frexpl when
long double is the same as double (i.e. in exactly the case the uClibc
doesn't have these functions).
So add another exception for this.
Upstream-status: not applicable (code has changed too much)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches, they aren't required any more.
It fixes a bug where inline comments cause issues, like:
Libs: -lblah # -lbleh
...it would make pkgconf search for the '#' package
This is required for the nettle 3.1.1 upgrade since howgeed.pc adjusts
Libs according to static/dynamic builds using the comment feature.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
API is now compatible with nettle 2.7.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
zlib isn't optional even though it seems like it, fixes build failure
such as:
log.cc:51:18: fatal error: zlib.h: No such file or directory
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
