NetCube-Systems-Austria/kumquat-buildroot
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
59a0b5c9fd
kumquat-buildroot/configs/zynqmp_kria_kv260_defconfig

43 lines
2.1 KiB
Plaintext
Raw Normal View History

add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_aarch64=y
configs/zynqmp: bump to xilinx-v2023.1 This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes the following updates: - Linux v6.1.5 - U-Boot v2023.01 - ATF v2.8 (including mainline buildroot patches) - PMUFW xilinx_v2023.1 - Updated pm_cfg_obj.c from Vitis v2023.1 - Removed kria u-boot patch which is included with xilinx-v2023.1 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-08-02 07:55:46 +02:00
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
configs/zynqmp_kria_kv260_defconfig: fix to u-boot.itb generation This patch is a temporary fix for the kv260 u-boot.itb generation until a proper fix has been implemented within u-boot. The problem is u-boot can only be configured to use the kria k26 som dts configuration at build time, and the kv260 carrier board overlay is missing from the build. Without this, all of the carrier board drivers are missing. This patch will be removed from buildroot once u-boot can build a correct u-boot.itb for the kria kv260 starter kit including the carrier board overlay and corresponding drivers: https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/ Signed-off-by: Neal Frager <neal.frager@xilinx.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> [yann.morin.1998@free.fr: add URL provided by Luca] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-06-22 06:24:39 +02:00
BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh board/zynqmp/kria/kv260/kv260.sh"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
configs/zynqmp_kria_kv260_defconfig: fix to u-boot.itb generation This patch is a temporary fix for the kv260 u-boot.itb generation until a proper fix has been implemented within u-boot. The problem is u-boot can only be configured to use the kria k26 som dts configuration at build time, and the kv260 carrier board overlay is missing from the build. Without this, all of the carrier board drivers are missing. This patch will be removed from buildroot once u-boot can build a correct u-boot.itb for the kria kv260 starter kit including the carrier board overlay and corresponding drivers: https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/ Signed-off-by: Neal Frager <neal.frager@xilinx.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> [yann.morin.1998@free.fr: add URL provided by Luca] Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2022-06-22 06:24:39 +02:00
BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 mmcblk1p2 ${UBOOT_DIR}"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
configs/zynqmp_kria_kv260_defconfig: bump to xilinx-v2023.2 This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes the following updates: - Linux v6.1.30 with additional bug fixes - U-Boot v2023.01 with additional bug fixes - ATF v2.8 with additional bug fixes - PMUFW xilinx_v2023.2 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-11-16 13:23:24 +01:00
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.1_LTS_2023.2)/xlnx_rebase_v6.1_LTS_2023.2.tar.gz"
configs/zynqmp: bump to xilinx-v2023.1 This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes the following updates: - Linux v6.1.5 - U-Boot v2023.01 - ATF v2.8 (including mainline buildroot patches) - PMUFW xilinx_v2023.1 - Updated pm_cfg_obj.c from Vitis v2023.1 - Removed kria u-boot patch which is included with xilinx-v2023.1 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-08-02 07:55:46 +02:00
BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/zynqmp_kria_kv260_defconfig: fix linux dts name The Linux DTS name has changed for the zynqmp_kria_kv260 with Xilinx 2022.2. smk-k26-revA-sck-kv-g-revB has become zynqmp-smk-k26-revA-sck-kv-g-revB. This DTS corresponds to generating the zynqmp-smk-k26-revA.dtb for the k26 som and applying the zynqmp-sck-kv-g-revB.dtbo for the kv260 carrier board. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3477506541 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Neal Frager <neal.frager@amd.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-12-22 11:31:44 +01:00
BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k26-revA-sck-kv-g-revB"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
configs/zynqmp_kria_kv260_defconfig: bump to xilinx-v2023.2 This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes the following updates: - Linux v6.1.30 with additional bug fixes - U-Boot v2023.01 with additional bug fixes - ATF v2.8 with additional bug fixes - PMUFW xilinx_v2023.2 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-11-16 13:23:24 +01:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.8_2023.2)/xlnx_rebase_v2.8_2023.2.tar.gz"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp"
configs/zynqmp_kria_kv260_defconfig: build atf with uart1 console This patch fixes an ATF issue by building the ATF for uart1 instead of uart0 for the Kria KV260 Starter Kit. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-17 20:38:42 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="ZYNQMP_CONSOLE=cadence1"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
configs/zynqmp_kria_kv260_defconfig: bump to xilinx-v2023.2 This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes the following updates: - Linux v6.1.30 with additional bug fixes - U-Boot v2023.01 with additional bug fixes - ATF v2.8 with additional bug fixes - PMUFW xilinx_v2023.2 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-11-16 13:23:24 +01:00
BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2023.01_2023.2)/xlnx_rebase_v2023.01_2023.2.tar.gz"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt"
board/zynqmp/kria/kv260/uboot.fragment: move to board/zynqmp/kria This patch moves the board/zynqmp/kria/kv260/uboot.fragment file to the board/zynqmp/kria directory. The reason is that this file is the same for any kria starter kit and is not specific to the kv260. By moving the file, it can be logically re-used with the kr260 when support for this starter kit is added to buildroot. KR260 Starter Kit: https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html Signed-off-by: Neal Frager <neal.frager@amd.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-12-06 16:52:26 +01:00
BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynqmp/kria/uboot.fragment"
configs/zynqmp_kria_kv260_defconfig: use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS This patch migrates the u-boot device tree definition from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS instead for the zynqmp_kria_kv260_defconfig. Signed-off-by: Neal Frager <neal.frager@amd.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2022-11-07 14:15:16 +01:00
BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=zynqmp-smk-k26-revA"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
configs/zynqmp: bump to xilinx-v2023.1 This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes the following updates: - Linux v6.1.5 - U-Boot v2023.01 - ATF v2.8 (including mainline buildroot patches) - PMUFW xilinx_v2023.1 - Updated pm_cfg_obj.c from Vitis v2023.1 - Removed kria u-boot patch which is included with xilinx-v2023.1 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-08-02 07:55:46 +02:00
BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
BR2_TARGET_UBOOT_ZYNQMP=y
configs/zynqmp_kria_kv260_defconfig: bump to xilinx-v2023.2 This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes the following updates: - Linux v6.1.30 with additional bug fixes - U-Boot v2023.01 with additional bug fixes - ATF v2.8 with additional bug fixes - PMUFW xilinx_v2023.2 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2023-11-16 13:23:24 +01:00
BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2023.2/kv260-kria/pmufw.elf"
add configs/zynqmp_kria_kv260_defconfig This patch adds support for Xilinx Kria KV260 starter kit. KV260 features can be found here: https://www.xilinx.com/products/boards-and-kits/kv260.html While the Kria SOM is based on a ZynqMP SoC, there are some key boot config differences from the other ZynqMP evaluation boards. 1. There are no boot switches on Kria SOMs. The boot mode is thus hard configured for QSPI flash. A pre-programmed boot.bin comes with every Starter Kit. U-Boot can then find the Linux kernel and file system on the SD card. Optional instructions for updating the boot.bin in the QSPI flash can be found in the readme.txt file and the link below. https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM 2. Kria SOMs use UART1 for the console instead of UART0. For this reason, Kria Starter Kits will use a separate extlinux.conf file from other ZynqMP evaluation boards. Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-05-05 17:54:23 +02:00
BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c"
BR2_TARGET_UBOOT_FORMAT_ITB=y
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
configs/zynqmp: bump to xilinx-v2023.1 This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes the following updates: - Linux v6.1.5 - U-Boot v2023.01 - ATF v2.8 (including mainline buildroot patches) - PMUFW xilinx_v2023.1 - Updated pm_cfg_obj.c from Vitis v2023.1 - Removed kria u-boot patch which is included with xilinx-v2023.1 Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2023-08-02 07:55:46 +02:00
BR2_GLOBAL_PATCH_DIR="board/zynqmp/patches"
Reference in New Issue Copy Permalink