9566521b59
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the Allwinner H2+ SoC. It is similar to the other Banana Pi M2* boards, from which this configuration is inspired. [1]: http://www.banana-pi.org/m2z.html Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
35 lines
947 B
Plaintext
35 lines
947 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
Buildroot environment for the Bananapi M2 Zero. With the current configuration
|
|
it will bring-up the board, and allow access through the serial console.
|
|
|
|
Bananapi M2 Zero link:
|
|
http://www.banana-pi.org/m2z.html
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make bananapi_m2_zero_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sync
|
|
|
|
Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console
|
|
is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
|