35 lines
947 B
Plaintext
35 lines
947 B
Plaintext
|
Intro
|
||
|
|
=====
|
||
|
|
|
||
|
|
This default configuration will allow you to start experimenting with the
|
||
|
|
Buildroot environment for the Bananapi M2 Zero. With the current configuration
|
||
|
|
it will bring-up the board, and allow access through the serial console.
|
||
|
|
|
||
|
|
Bananapi M2 Zero link:
|
||
|
|
http://www.banana-pi.org/m2z.html
|
||
|
|
|
||
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
||
|
|
|
||
|
|
How to build
|
||
|
|
============
|
||
|
|
|
||
|
|
$ make bananapi_m2_zero_defconfig
|
||
|
|
$ make
|
||
|
|
|
||
|
|
Note: you will need access to the internet to download the required
|
||
|
|
sources.
|
||
|
|
|
||
|
|
How to write the SD card
|
||
|
|
========================
|
||
|
|
|
||
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
||
|
|
in the output/images/ directory.
|
||
|
|
|
||
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||
|
|
|
||
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||
|
|
$ sync
|
||
|
|
|
||
|
|
Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console
|
||
|
|
is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
|