i2pd (I2P Daemon) is a full-featured C++ implementation of I2P
client.
I2P (Invisible Internet Protocol) is a universal anonymous
network layer.
All communications over I2P are anonymous and end-to-end
encrypted, participants don't reveal their real IP addresses.
http://i2pd.website
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Add third patch to not install the license file in /usr/LICENSE and
the source code in /usr/src instead of using a post-install-target
hook to remove /usr/LICENSE and /usr/src. Indeed, we're not sure if
/usr/src contains only stuff installed by this package.
- Clarify the comment that explains why -DTHREADS_PTHREAD_ARG=OFF is
passed, especially because it's only needed for older versions of
CMake, and causes a warning with newer versions of CMake.
- Propagate architecture dependencies to the Config.in comment about
the exception_ptr requirement.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ./config.h:30:0,
from ...
./wtf/Platform.h:323:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
from this defconfig:
BR2_arm=y
BR2_cortex_a72=y
BR2_ARM_FPU_VFPV3D16=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5WEBKIT=y
The patch is an adaptation of an upstream fix in version 5.212 of
qtwebkit[1].
Unfortunately, the commit cannot be backported and has to be fixed since
the toolchain does not define __ARM_ARCH_8__ but __ARM_ARCH_8A__.
$ host/bin/arm-buildroot-linux-gnueabihf-g++ -dM -E - < /dev/null | grep ARM_ARCH
#define __ARM_ARCH_ISA_ARM 1
#define __ARM_ARCH_8A__ 1
#define __ARM_ARCH_PROFILE 65
#define __ARM_ARCH_ISA_THUMB 2
#define __ARM_ARCH 8
#define __ARM_ARCH_EXT_IDIV__ 1
[1]: 35655d5f4b/Source/WTF/wtf/Platform.h (L241-L242)
Cc: Arnout Vandecappelle <arnout@mind.be>
Reported-by: Brock Williams <brock@cottonwoodcomputer.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CD paranoia on top of libcdio
http://www.gnu.org/software/libcdio/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The graph-depends was not very consistent in colors vs. colours: some
parts were using colours, some parts were using colors.
Let's settle on the US spelling, colors.
This change the user-visble option --colours to --colors, but it is
unlikely that a lot of users customize the colors through
BR2_GRAPH_DEPS_OPTS, so this user interface change is considered
reasonable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends script had no main() function, and the main code was
actually spread between the function definitions, which was a real
mess.
This commit moves the global code into a main() function, which allows
to more easily follow the flow of the script. The argument parsing
code is moved into a parse_args() function.
Most of the global variables are removed, and are instead passed as
argument when appropriate. This has the side-effect that the
print_pkg_deps() function takes a lot of argument, but this is
considered better than tons of global variables.
The global variables that are removed are: max_depth, transitive,
mode, root_colour, target_colour, host_colour, outfile, dict_deps,
dict_version, stop_list, exclude_list, arrow_dir.
The root_colour/target_colour/host_colour variables are entirely
removed, and instead a single colours array is passed, and it's the
function using the colors that actually uses the different entries in
the array.
The way the print_attrs() function determines if we're display the
root node is not is changed. Instead of relying on the package name
and the mode (which requires passing the root package name, and the
mode), it relies on the depth: when the depth is 0, we're at the root
node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"libdnet is in the dependency chain of snort that has added it to its
_DEPENDENCIES variable without selecting it or depending on it from
Config.in"
Fixes:
http://autobuild.buildroot.net/results/9cf/9cf5883d1ed95d3d76d529a9a25f0e600adf25cd
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: select and add to dependencies good/bad plugins,
enable/disable examples if gtk2/3 with x11 backend is available]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use a normal config option instead of menuconfig, update DEVELOPERS]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like the utilities, it is meant to run on the host machine, hence must
be built using the host toolchain.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows using <PKG>_SRCDIR_OVERRIDE_RSYNC_EXCLUSIONS in local.mk to
skip copying parts of source trees unneeded for building. For example,
when developing WebKitGTK+, it's handy to skip copying all the tests and
other build directories, which are huge:
WEBKITGTK_OVERRIDE_SRCDIR = /home/aperez/WebKit
WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
--exclude JSTests --exclude ManualTests \
--exclude PerformanceTests --exclude WebDriverTests \
--exclude WebKitBuild --exclude WebKitLibraries \
--exclude WebKit.xcworkspace --exclude Websites \
--exclude Examples
This saves a good chunk of time when rsync is used for the first time to
copy the source tree over before building.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: move documentation to the end of the section]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that <pkg>_BINDIR is always "bin", having it as a package variable
doesn't make much sense, so get rid of this variable completely, and
use "bin".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So far, we were using the 'go install' mechanism to build a package
and have its binary installed in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH). This worked fine when
building on x86-64 for ARM, but failed when building on x86-64 for
x86-64 because the binaries were installed in $$($(2)_WORKSPACE)/bin/.
Instead of doing some complicated logic to guess whether Go is going
to put our binaries in $$($(2)_WORKSPACE)/bin/ or in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH), we revert back to using
"go build", as it was done before the introduction of the golang
package infrastructure. "go build" lets us pass explicitly the
destination path of the binary to be generated.
There's just one complexity with how to decide on the name of the
binary that should be produced, and we have two cases:
- <pkg>_BUILD_TARGETS is the default, i.e ".". In this case we assume
a single binary is produced by "go build", and we name if after the
lower case package name. We allow this to be overridden thanks to
<pkg>_BIN_NAME.
- <pkg>_BUILD_TARGETS is non-default, and typically contains
something like "foo bar" or "cmd/foo cmd/bar". In this case, we
assume the binaries to be produced are "foo" and "bar", i.e we take
the non-directory part of the build target to name the binaries.
Because we're using this -o option, we no longer need to explicitly
create the binary directory, it is done by "go build".
Fixes:
http://autobuild.buildroot.net/results/1f9cd7c48e8c8f41326632a9c0de83915d72c45b/
[Peter: use $(or instead of $(if as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the latest Buildroot Developers meeting, we discussed that
test-pkg would perhaps be more widely used if it tested a smaller
subset of toolchains. Indeed, it currently tests 47 toolchains, which
takes very long to build. Several of the toolchain configurations are
quite similar, and it is perhaps not necessary for contributors to
test them all before submitting a package.
Therefore, this commit changes the test-pkg script to only test a
subset of the toolchain configurations by default. The N first
configurations of the CSV files are tested, where N is hard-coded in
the script. The CSV file has therefore been re-organized to have the
first N toolchains be the most important ones.
A -a/--all option is added to test with all toolchains, while a
-n/--number option is added to test with the first N toolchains, N
being passed on the command line.
Note that the list of toolchains (built in the "toolchains" shell
variable) is no longer sorted. Indeed, when the first N toolchains are
tested, we want them to be tested in the same order as they are listed
in the CSV file, as we are careful to order them in an interesting
order. We only sort when all toolchains are tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reorganizes the toolchain-configs.csv so that the first
toolchains are a subset of "useful" toolchains to be tested by
contributors to validate a package. This subset is the one that will
be used by default by test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 4.6, GCC deprecated -mfused-madd, -ffp-contract=off should
be used for the Xburst workaround.
Tested with the MIPS Sourcery 2011.03 toolchain (based on gcc 4.5),
the toolchain wrapper uses -mno-fused-madd, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2011.03/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-mno-fused-madd'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
And with the MIPS Sourcery 2012.09 toolchain (based on gcc 4.7), the
toolchain wrapper uses -ffp-contract=off, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2012.09/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-ffp-contract=off'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
Fixes the ci20_defconfig build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/60303132
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rework to continue supporting pre-gcc-4.6 toolchains, extend
the commit log after doing more testing.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch suggested by Thomas: Adding a path to --with-lua disables
pkgconf-based detection of lua, which in some cases needs libdl.
This patch removes --with-lua which fixes
http://autobuild.buildroot.net/results/cc1/cc13f4cef9cf6f18615d58f1d83b233812f19fa0/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those packages are unmaintained and not in a working state, for
details see https://github.com/xbmc/xbmc/pull/13723
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the situation where the hash is missing from the hash file, the
dl-wrapper downloads the file again and again until the developer
specifies the hash to complete the download step.
To avoid this situation, the freshly-downloaded file is not removed
anymore after a successful download.
After this change, the behaviour is as follows:
- Hash file doesn't exist, or file is in BR_NO_CHECK_HASH_FOR
=> always succeeds.
- Hash file exists, but file is not present
=> file is NOT removed, build is terminated immediately (i.e.
secondary site is not tried).
- Hash file exists, file is present, but hash mismatch
=> file is removed, secondary site is tried.
=> If all primary/secondary site downloads or hash checks fail, the
build is terminated.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout: extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds hackrf/host tools for HackRF, a low cost, open source
Software Defined Radio platform.
Sources of host tools are available on GitHub here:
https://github.com/mossmann/hackrf/tree/master/host
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[Arnout:
- Rename package to hackrf to match upstream name;
- Reorder dependencies and remove empty line (check-package);
- Use only sha256 hash;
- Add hash for license file;
- Bump to 2018.01.1;
- Use uploaded tarball rather than github-generated one;
- Fix dependencies of comment (|| instead of &&)
- Add UDEV_RULES_GROUP=plugdev in case the build host doesn't have
this group;
- Add patch fixing build without C++ compiler.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Romain Naour, use
QUOTATOOL_INSTALL_TARGET_OPTS to avoid installing man pages, as it
fails due to a bug in the upstream package Makefile]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In current Buildroot, clashes occur between the variables _NAME and
_BASE_NAME for two packages called foo and foo-base, i.e.
Package foo:
FOO_NAME = foo
FOO_BASE_NAME = foo-1.2.3
Package foo-base:
FOO_BASE_NAME = foo-base
FOO_BASE_BASE_NAME = foo-base-4.5.6
where variable FOO_BASE_NAME is clashing between these two packages.
Specific cases where this clash is already existing are:
- alljoyn-base
- alljoyn-tcl-base
- perl-xml-sax-base
The problem is generic and can occur for a number of variables in Buildroot.
A non-exhaustive list:
<pkg>_BASE and <pkg>_BASE_NAME
<pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
<pkg>_DIR and <pkg>_DL_DIR
<pkg>_VERSION and <pkg>_DL_VERSION
<pkg>_SOURCE and <pkg>_TARGET_SOURCE
<pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
<pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
<pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
One solution is to use another separator than '_' to separate the
package name from the rest of the variable name. For example, a double
underscore:
FOO__NAME
FOO__BASE_NAME
FOO_BASE__NAME
FOO_BASE__BASE_NAME
However, making that change for only this case means that the variable
naming is no longer consistent. And making the change for all variables has
a large impact, also on certain user scripts.
For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
the variables become:
FOO_NAME
FOO_BASENAME
FOO_BASE_NAME
FOO_BASE_BASENAME
For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
still pose a conflict with a package called 'foo-raw', take the opportunity
to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
as we have no variable called FOO_RAW.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build/image scripts may need to extract information from Microsoft
Excel (tm) spreadsheet files.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Arnout: add package/Config.in.host entry]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It should be "host gnupg" and not "host-gnupg" to be consistent with
all other Config.in.host options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
https://sourceforge.net/projects/freetype/files/freetype2/2.9/
Upstream changed its project URL to https in docs/FTL.TXT. We do the
same in Config.in and update the license hash for docs/FTL.TXT.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:
- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.
- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.
- There's no access to the SPI flash in these versions of
uboot/linux/dts.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
- rename to solidrun_clearfog_defconfig;
- specify kernel headers version (default is now 4.15);
- remove ext2 fs size override, the 4 extra MB are not needed;
- U-Boot needs dtc and openssl;
- add comments to defconfig;
- update .gitlab-ci.yml;
- mention in readme.txt that SFP support is missing;
- add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 0001-Complete-support-for-MIPS-n32-ABI.patch as it is now upstream and rebase
0002-Makefile.arm-remove-march-flags.patch.
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10856
The SSE_GENERIC target fails to build with a "sgemm_kernel.o: No such file
or directory" error. Several upstream bug reports exist for this:
https://github.com/xianyi/OpenBLAS/issues/502https://github.com/xianyi/OpenBLAS/issues/685
In both cases, upstream suggests using a different target definition
instead. E.G. from issue 685:
You may use NORTHWOOD on x86: make TARGET=NORTHWOOD that uses SSE2
instructions. It's very hard to find non-SSE2 x86 CPUs today. For x86-64
use the PRESCOTT target
So drop the SSE_GENERIC target. The only x86_64 variant we support not
covered by a more specific openblas target is the default variant, nocona
and jaguar.
Nocona was a Xeon variant of the P4 "Prescott" architecture, so use the
PRESCOTT openblas target:
https://en.wikipedia.org/wiki/Xeon#Nocona_and_Irwindale
Jaguar is from the Bobcat family, so use the BOBCAT openblas target:
https://en.wikipedia.org/wiki/List_of_AMD_microprocessors#Bobcat_core_architecture_(APU)
[Peter: add Jaguar as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the OpenCV3 Python support is enabled with Python 3.x, it builds
properly, and the resulting .so file is built for the target
architecture, but its name is wrong:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-x86_64-linux-gnu.so
This prevents Python 3.x from importing the module:
>>> import cv2
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ModuleNotFoundError: No module named 'cv2'
In order to fix this, we simply need to pass PKG_PYTHON_DISTUTILS_ENV
in the environment. The Python module then gets named:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-arm-linux-gnueabi.so
And can be imported properly:
>>> import cv2
>>>
This solution was suggested by Arnout Vandecappelle in
https://stackoverflow.com/questions/49059035/buildroot-opencv3-python-package-builds-for-the-wrong-target.
With Python 2.x, the module is named just cv2.so so this problem isn't
visible. However, for consistency, we also pass
PKG_PYTHON_DISTUTILS_ENV when building against Python 2.x, by putting
the OPENCV3_CONF_ENV assignment inside the
BR2_PACKAGE_OPENCV3_LIB_PYTHON condition, but outside the
BR2_PACKAGE_PYTHON3/BR2_PACKAGE_PYTHON condition.
Signed-off-by: Sasha Shyrokov <alexander-shyrokov@idexx.com>
[Thomas: extend the commit log, apply the solution to Python 2.x.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that all issues in Config.in files have been fixed, let's try to
make sure we don't introduce new ones by checking regularly these files
issues in Gitlab CI.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/Config.in, package/Config.in.host, package/x11r7/Config.in and
package/kodi/Config.in do not comply with the normal Config.in
indentation rules. However, this violation of the rule is legitimate, so
let's skip them in check-package for this specific indentation check.
This removes the last 2197 remaining warnings on Config.in files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Ricardo: rebase patch to use relative paths passed by the main script,
fix flake8 warnings, add package/Config.* to the list]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Each line must fit in <tab><2 spaces><62 chars>.
The default width for textwrap.wrap() is 70, so explicit set it to 62.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These files can benefit from this script to prevent common mistakes when
submitting patches.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Do the same as used in all other Config.in files and use only one tab.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The toolchain directory can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the toolchain/ directory.
Ignore this symbol:
- BR_LIBC: defined by the buildroot toolchain, used by gcc-final.mk.
Ignore toolchain/toolchain-external/pkg-toolchain-external.mk as it
declares a package infra and not a package itself.
Ignore toolchain/helpers.mk as it contains only helper functions.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the linux/ directory.
Ignore missing LINUX_EXT_ prefix as the variables for linux extensions
do not use it.
Ignore this symbol:
- LINUX_EXTENSIONS: defined by each linux extension, used by
linux/linux.mk.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
