Amarula A64-Relic board has AP6330 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6330 chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Amarula A64-Relic board
with below features:
- U-Boot 2018.07
- Linux 4.17.0-rc6
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y and
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch 0001. We patch the configure script directly in patch 0002,
and we don't autoreconf. So this patch has no effect (never had).
Rename patch 0002. The next version bump should drop this patch as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgpg-error version 1.28 added support for riscv64.
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/python-async-timeout/python-async-timeout.mk:6: should be a blank line (http://nightly.buildroot.org/#writing-rules-mk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/python-yarl/python-yarl.mk:6: should be a blank line (http://nightly.buildroot.org/#writing-rules-mk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Multidict is dict-like collection of key-value pairs where a key may
occur more than once in the container.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: extend help text based on commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fast implementation of asyncio event loop on top of libuv.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: change order of 'depends on' lines]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Remove first patch and pass CC_FOR_BUILD and other variables in
LIBXMLRPC_CONF_OPTS instead of LIBXMLRPC_CONF_ENV because a similar
solution is already in version thanks to
https://sourceforge.net/p/xmlrpc-c/code/2905
- Remove second patch (already in version thanks to
https://sourceforge.net/p/xmlrpc-c/code/2908)
- Remove third path (already in version thanks to
https://sourceforge.net/p/xmlrpc-c/code/2909)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pull a patch already submitted upstream[1] that fixes mkostemp when
_LARGEFILE64_SOURCE is defined. This is required to prevent failures
on eudev[2]:
# udevadm hwdb --update
Failure writing database //etc/udev/hwdb.bin: Invalid argument
1. https://patchwork.ozlabs.org/patch/990045/
2. https://patchwork.ozlabs.org/patch/984848/
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://webkitgtk.org/2018/10/29/webkitgtk2.22.3-released.html
Patch "0001-ARM-Building-FELightingNEON.cpp-fails-due-to-missing.patch"
is removed because it is included in the new release.
This is a maintenance release which further improves playback of video
when using media source extensions (MSE), specially for WebM content,
and provides a few correctness fixes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This covers the case where GL/GLES is available (so -DENABLE_OPENGL=ON
gets passed), which makes the webkitgtk build system assume GStreamer-GL
is available, while actually it is not.
Also, providing an option to manually disable usage of GStremer-GL can
help with certain target configurations in which using OpenGL for video
handling might result in incorrect rendering.
This fixes some autobuilder failures like the following:
http://autobuild.buildroot.net/results/187796535af53ece426641ff7d88aabada281674http://autobuild.buildroot.net/results/00c1a8ea23a99728a4f3f4478705f2383414ae41
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumps Golang host-go compiler to 1.11.1 release.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let the option depend on linux-pam as pam has quite some dependencies and
this is unlikely to be used if pam isn't explicitly enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wolfssl is a library, so it should be installed into staging so other
packages can find the header files / library.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/python-typing/Config.in:5: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NetworkManager includes some parts of the systemd-networkd code in its
codebase. That can be found at src/systemd/src/libsystemd-networkd.
The DHCP implementation provided by systemd-networkd is used when
NetworkManager is configured to use the internal implementation,
however the default is to use dhclient.
When NetworkManager is configured to use the internal dhcp and an
interface is setup with ipv6.method=auto (which is the default value)
or ipv6.method=dhcp, this flaw can be exploited. When using
ipv6.method=auto, the DHCPv6 client can be automatically started with a
Router Advertisement packet.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "development" defconfigs for Atmel platforms enable both OpenSSH
and Dropbear, which doesn't make a lot of sense, as only one SSH
server can start on port 22.
This commit therefore drops BR2_PACKAGE_DROPBEAR=y from those
defconfigs, keeping OpenSSH as an SSH server/client, as was requested
by Atmel/Microchip folks in the review of an earlier version of this
patch [1]. Since those defconfigs are "development" defconfigs, they
are not meant to be minimal, and already provide an arbitrary set of
packages, so using openssh is just as good as using dropbear in this
case.
[1] https://patchwork.ozlabs.org/patch/989516/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd-networkd is vulnerable to an out out-of-bounds heap write in the
DHCPv6 client when handling options sent by network adjacent DHCP servers.
A attacker could exploit this via malicious DHCP server to corrupt heap
memory on client machines, resulting in a denial of service or potential
code execution.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Peter: add description]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1.4.50:
[mod_alias] security: potential path traversal with specific configs
[core] security: use-after-free invalid Range req
[mod_alias] security: path traversal in mod_alias (in some use cases) (fixes#2898)
[core] security: use-after-free after invalid Range request (fixes#2899)
1.4.51:
[core,security] process headers after combining folded headers
[mod_userdir] security: skip username “.” and “..”
1.4.51 brings optional pam and wolfssl support. Explicitly disable these
options for now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 2.12.0 and
e52c6ba341,
SDL 1.2 is deprecated so switch to SDL 2.0 as SDL 1.2 will be removed in
the last release of 2018
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since qemu 2.12.0 and
2ec78706d1,
x_keymap.h has been converted from "SDL display driver" to "X11 keymaps"
So add a select on BR2_PACKAGE_SDL_X11
Fixes:
- http://autobuild.buildroot.org/results/1908d2d7de8d3aff11ed6fbb8fe4cf3eff54b5a5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 1.9.0 and
c0376e9e2f,
synergy needs C++14 so add a dependency on
BR2_TOOLCHAIN_GCC_AT_LEAST_4_9
Fixes:
- http://autobuild.buildroot.org/results/c4646ee9342ea8bd906bfe2b29996c48cb403ccc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Reviewed-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6eacea5ae0 accidentally removed these changes in merge_config.sh:
0f56304521 ("merge_config.sh: create temporary files in /tmp")
28fac3973b ("merge_config.sh: add br2-external support")
Changes were lost because commits just changed files, but didn't add patches.
Therefore not only restore our changes, but also add (updated) patches.
Missing 0f56304521 caused breaking merge_config.sh when used in out of
tree build:
$ make -C buildroot O=$PWD/output defconfig
...
$ cd output
$ echo 'BR2_TARGET_GENERIC_HOSTNAME="test"' > test.frag
$ ../buildroot/support/kconfig/merge_config.sh .config test.frag
Using .config as base
Merging test.frag
umask 0022 && make -C /home/test/buildroot O=/home/test/output/. alldefconfig
GEN /home/test/output/Makefile
*** Can't read seed configuration "./.tmp.config.qIcpASpUyh"!
make[1]: *** [Makefile:925: alldefconfig] Error 1
make: *** [Makefile:16: _all] Error 2
Fixes: 6eacea5ae0 support/kconfig: bump to kconfig from Linux 4.17-rc2
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reported-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
which was specified, but not added during last update.
Fixes: 6eacea5ae0 ("support/kconfig: bump to kconfig from Linux 4.17-rc2")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an upstreamable patch to use pkg-config for finding libedit and
readline dependencies and drop ncurses "hack"
Fixes:
- http://autobuild.buildroot.org/results/b0b17f4a5b0a32631a12bdb350ba7c21f7c595d0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
