Closes#4369
Default tar permissiong make it impossible to apply patches to some of
the files.
Change extraction command to skip permissions by using "-O" tar option
and a pipe tar chain.
Solution suggested by: Arnout Vandecappelle <arnout@mind.be>
[Peter: rework to use define as suggested by Thomas]
Signed-off-by: Damian Kaczmarek <damian@veritymedical.co.uk>
Tested-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4297
Tweak qmake.conf to ensure our cross pkg-config is used, instead of
whatever is first in the path. In order to do this, tweak the
QT_QMAKE_SET to be able to handle variables which aren't prefixed with
QMAKE_.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4021
Fix build breakage for sparc as reported in bug #4021
Patches from Konrad Eisele <konrad@gaisler.com>
Submitted in the uclibc mailing list.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4321
Old neon version wasn't compatible with our openssl version, so bump
the version. This also fixes some security related bugs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4165
Use ln -sf in case destination already exists from an earlier install,
and use install -D rather than cp while we're at it.
Based on patch by Hector Oron <hector.oron@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4093
AUTOTARGETS doesn't handle compressed patches, so the '400' patch did
not get applied.
Fix it by extracting the patch. With this, the '500' patch is no longer
needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3583, #3649
Fixes xfonts_font-adobe build failure.
Signed-off-by: Michael J. Hammel <mjhammel@graphics-muse.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3985
The wildcard function in make 3.82 no longer sorts the output, so
add an explicit sort so the defconfigs are listed in a sensible order.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3379
A good filesystem performance benchmark program
Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3571
The current approach for building fw_printenv for the target fails on
some configurations, so use the upstream make target (which works)
instead.
At the same time get rid of the unneeded stripping.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3445.
OpenSSL emits bswap instructions when building for i386 targets which
unfortunately is only available on 486+ class processors.
Since the normal workaround is detected at build time and we are cross
compiling we need to specify this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3457
The Debian package snapshot service moved to an official debian.org
address last year (http://www.debian.org/News/2010/20100412) with a
slightly different URL structure, so adjust the download URL to match.
Signed-off-by: Hector Oron <hector.oron@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3451
The Debian package snapshot service moved to an official debian.org
address last year (http://www.debian.org/News/2010/20100412) with a
slightly different URL structure, so adjust the download URL to match.
Signed-off-by: Hector Oron <hector.oron@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3475
There's no real reason to sync after creating the device nodes,
and it slows down the file system image creating quite a lot on
busy systems, so get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3307
Synergy needs libXtst, a toolchain with wchar support and was missing
an include for exit().
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3277
Quagga's snmp support tries to link with libcrypto from openssl by
default.
That's a bad no no since snmp might have ssl support disabled
and openssl won't be around.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The makedevs script did not always generate the requested set of device names / minor number series.
* If start != 0, then requesting (count) devices would generate only (count - start)
* If start != 0 && increment != 1, then requesting minors starting with (minor) would generate minors starting with (minor + (start * (increment - 1)))
This patch fixes the code and updates the usage text with extra examples.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3205
OpenSSL's build system tries to be too wise for it's own good when
guessing what libdir should be.
This causes problems like the one reported in bug #3205 so just specify
libdir to point to /lib (since it's prefixed it would finally be
/usr/lib) since it should be present on 32 and 64 bit targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2935
Add ntpdate option and make ntpd optional.
Based on incomplete patch by Frederik Pasch <fpasch@googlemail.com>
Also enable crypto when openssl is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3169
Typo in modules_lib_dirs section of patch specified modules_include_dirs
instead of modules_lib_dirs. This matters if PYTHON_MODULES_LIB
is not passed into the script.
Signed-off-by: Mark Wickham <markw@digi.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3181
When install -D is used (to ensure destination dirs exists), the destination
file name has to be given as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3109
Pass the correct -C <dir> option to make menuconfig.
Signed-off-by: Kim Jae-hui <twinkle.j4k@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3007
Changed the KEXEC_SITE to the new home of kexec. This patch also satisfies
bug #3007 created by me last month. Thanks to Gustavo for pointing out that
the easy fix was to bump kexec to 2.0.2.
Signed-of-by: Andy Kennedy <Andy.Kennedy@AdTran.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2647
[Peter: Adjust for the real 12bit majors/20bit minors supported by Linux]
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2929
Instead of just adding a fixed amount to the blocks used, try to
estimate the real space needed according to the filesystem structure
(bitmaps, inodes, blocks).
The side effect of this is that we no longer significantly overestimate
the size needed for small file systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2371
Bug 2371 was a Qt compilation issue when MySQL support was enabled,
because the Qt configuration tests were looking at host MySQL
libraries.
Even though I couldn't reproduce the bug with MySQL libraries
installed on my host, there was clearly a problem since
-I/usr/include/mysql and -L/usr/lib/mysql were part of the compilation
flags when building those tests.
This was caused by the fact that /usr/bin/mysql_config was used
instead of $(STAGING_DIR)/usr/bin/mysql_config. We fix this by passing
the path to the correct mysql_config script using the -mysql_config Qt
./configure argument. Since this mysql_config script returns the
correct flags for libraries and headers path, the hardcoded -I and -L
flag in qt.mk are no longer needed.
With this in place, Qt is no longer compiled with -I/usr/include/mysql
and -L/usr/lib/mysql, which presumably should fix the problem reported
in bug 2371.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2965
For some odd reason, xkeyboard-config < 1.8 was creating a symbolic
link from /usr/share/X11/xkb/xkbcomp to the xkbcomp binary. But in
cross-compilation mode, this is absurd as the xkbcomp binary to which
the link is pointing is the one in $(HOST_DIR).
This symbolic link thing has been removed completely starting from
xkeyboard-config 1.9. See
http://cgit.freedesktop.org/xkeyboard-config/commit/?id=f413dff57e77e7b01461508f74b4e92d1dc8defd.
Therefore, we simply bump xkeyboard-config to the latest available
version, 2.0.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by Miroslav Ignjatovic in bug #2983, our hack in
xlib_libX11 to build makekeys for the host does not work, for several
reasons:
* As we are building a tool for the host, we shouldn't pass
-I$(STAGING_DIR)/usr/include, since the $(STAGING_DIR) contains
headers of packages for the target.
* Instead, we should use the headers in $(HOST_DIR)/usr/include. They
were not used due to a typo: $(HOST_CFLAGS) must be used instead of
$(HOSTCFLAGS).
* Finally, in order for makekeys to find the required headers in
$(HOST_DIR)/usr/include, we must depend on host-xproto_xproto.
This fixes bug #2983.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
l2tp is no longer being developed, and xl2tpd is forked from l2tpd and is
maintained by Xelerance Corporation.
[Peter: remove invalid pppd dependency]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows to disable the build of the format specification
documentation, which was causing issues in cross-compiling mode.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Based on the conversion to gentargets done by Martin Banky, several
issues were fixed, and the mplayer package was improved:
* Updated to a recent SVN version
* Removed mandatory dependency on libmad
* The AVR32 specific patch has been removed. It was a pain to remain
blocked at the old 1.0-rc2 just for this patch. All this
optimization work should have been submitted upstream, Buildroot is
not the place to carry such heavy modifications.
* Options were added to select whether mplayer and/or mencoder should
be built/installed.
* Support for additional options if packages have been selected:
tremor, libmad, libtheora, libpng, jpeg, xlib_libX11,
xlib_libXv. More could be added in the future.
* Support for ARM-related optimization options. Similar improvements
could be done for x86 and PowerPC architectures.
[Peter: fix build with !IPV6]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas: remove all patches, since they have been merged. Implement
the target uninstallation step, fix many issues. ]
[Peter: fix target install / uninstall steps]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package has been marked deprecated, is no longer developed
upstream, so let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in Buildroot last year, no-one
complained, and it isn't developed upstream anymore. So get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated in October, and no-one
complained. Moreover, it doesn't sound like a package that is widely
used on embedded systems. So we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package has been marked deprecated some time ago, because it has
been integrated into Busybox. Let's get rid of it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, memtester requires largefile support
[ Thomas: add patch to fix memtester's Makefile at installation
stage. Bump to 4.2.1. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas: simplifications and bump to 2.02.78 ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lsof is packaged as a tarball inside a .tar.bz2 package, so we have a
post-extract hook to extract the source code tarball, so that for the
next steps, lsof looks like a normal package.
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, changed the site to Debian, to get the latest patches
[ Thomas: add inittab compatible with sysvinit. Minor fixes. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also, changed the site to Debian, to get the latest patches
[ Thomas: Minor fixes. Removed S25sysklogd since our default
/etc/inittab already starts klogd and sysklogd. ]
[Peter: only install syslog.conf if not available in skeleton]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mrouted is once again being actively developed.
See http://github.com/troglobit/mrouted
[ Thomas: bump to 3.9.4, patches updated, prefix fix. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ Thomas: minor fixes. ]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reworking ltp-testsuite is needed in order to get rid of some
thread-specific options that will be cleaned-up in the next commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
FBGrab is a framebuffer screenshot program, capturing the linux
frambuffer and converting it to a png-picture.
[Peter: drop zlib dep, add uninstall]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also simply installation rules a little
[Peter: leave in busybox install fix]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case /etc/init.d does not exist.
[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case /etc/init.d does not exist.
[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case /etc/init.d does not exists.
[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And remove unneeded explicit stripping of target binaries
[Peter: use install -D]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Ensure hostapd and hostapd_cli are installed in /usr/bin/ even if the
directory does not exist.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If /etc/init.d does not exist, we need to be sure that the dbus
startup script is installed at the right place.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
