lib/colors.c uses HAVE_LIBTINFO to decide whether term.h and ncurses.h
should be included. However, the configure.ac check is bogus: it
checks for tinfo using pkg-config, and then if it fails, checks with
AC_CHECK_LIB(). So, if you have tinfo installed, but not the
corresponding development package, the pkg-config test will fail, but
the AC_CHECK_LIB test will succeed, even though the headers are not
available.
To address this, we explicitly tell host-util-linux that tinfo is not
available, like we're already doing for ncurses.
Fixes:
http://autobuild.buildroot.net/results/3c447e601a7b728860e78cabf2191ab206e6480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, there are two failure paths in the wrapper:
- if the tar fails, then the error is ignored because it is on the
left-hand-side of a pipe;
- if the find fails, then the error is ignored because it is a
process substitution (and there is a pipe, too).
While the former could be fixed with "set -o pipefail", the latter can
not be fixed thusly and we must use an intemediate file for it.
So, fix both issues by using intermediate files, both to generate the
list of files to include in the archive, and generate the archive in a
temporary tarball.
Fixes the following build issue, where the find is failing for whatever
unknown reason:
http://autobuild.buildroot.net/results/20f/20fd76d2256eee81837f7e9bbaefbe79d7645ae9/
And this one, where the process substitution failed, also for an unknown
reason:
http://autobuild.buildroot.org/results/018/018971ea9227b386fe25d3c264c7e80b843a9f68/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quote from erlang configure without unixodbc:
checking for odbc in standard locations... no
configure: WARNING: No odbc library found skipping odbc
configure: WARNING: "ODBC library - header check failed"
configure: WARNING: "ODBC library - link check failed"
Quote from erlang configure with unixodbc:
checking for odbc in standard locations... -L/home/buildroot/br3_couchdb/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/lib
checking for SQLAllocHandle in -lodbc... yes
To check for unixodbc support used by erlang use readelf:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/erlang/lib/odbc-2.11.1/priv/bin/odbcserver | grep NEEDED
0x00000001 (NEEDED) Shared library: [libodbc.so.2]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Tested using this minimal defconfig:
BR2_PACKAGE_ERLANG=y
BR2_PACKAGE_ERLANG_SMP=y
BR2_PACKAGE_UNIXODBC=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finding the packages that select another one in a specific configuration
is not very trivial:
- when optional, the dependency is not expressed in Kconfig
- looking at the .mk files is not very nice.
Introduce a way to dump reverse dependencies of packages, i.e. the list
of packages that directly depend on that package. Like for direct
dependencies, we limit the list to the first-order reverse dependencies.
Document it in the main help; use the opportunity to also document
foo-show-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libglob is the OpenBSD implementation of glob(3).
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: slightly rework how the make targets are calculated.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now explains limitations of building against Lua < 5.2 interpreters
and how to link to LuaJIT library.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most probably this was missed in commit
65b2ae49fe which removed pinning to Lua
5.2.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: simplify init script, use relative symlinks]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update U-Boot to 2016.09.01 and kernel to 4.8.4 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the SD card is connected to the host PC it can be mounted as
/dev/mmcblk0 or /dev/sdX, depending on how the SD controller is connected to
/the PC.
In this case the first partition is /dev/mmcblk0p1, not /dev/mmcblk01.
So use the ${PART1} variable to correctly assign this location.
[Peter: extend commit meesage]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following error when building rsyslog:
imfile.c: In function 'in_setupFileWatchStatic':
imfile.c:1614:28: error: 'GLOB_BRACE' undeclared (first use in this function)
GLOB_MARK|GLOB_NOSORT|GLOB_BRACE, NULL, &files);
^
flag GLOB_BRACE is not available on musl. Since package uses it
unconditionally, we mark it not available for musl.
Fixes:
http://autobuild.buildroot.net/results/6d4/6d480bb1e1466809d8ff119f6b35bb91df00785c/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, HAVE_LUA=y was only passed when BR2_PACKAGE_LUA=y. However,
swupdate can also use LuaJIT instead of the classic Lua. Therefore,
this commit updates the package to use BR2_PACKAGE_HAS_LUAINTERPRETER
and the luainterpreter virtual package.
Note that the swupdate configuration needs to be updated separately
(via swupdate-menuconfig) to enable Lua support, and to specify the
Lua version (which should be jit-5.1 to link against LuaJIT).
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
[Thomas: use the luainterpreter virtual package, expand commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current type for 'patches' argument is str. It supposed to only
contain names of files.
If we specify FileType as type, then we don't need to open file ourself
and it allows script to read patch from standard input as well.
e.g.
$ git show -1 | ./support/scripts/get-developers -
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common board/freescale/common/post-image.sh script instead of
a custom one.
As the final image binary is called "sdcard.img" update the documentation
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c457213fbc reworked the selection
of PHP interfaces, moving from a choice..endchoice to a three
independent sub-options.
Thanks to how choices are handled by kconfig, an option suitable for
noMMU platforms was automatically chosen by default. When the
choice...endchoice got removed in
c457213fbc, we introduced a "select" for
one of the interfaces, to make sure at least one interface is
selected.
Unfortunately, the selected interface does not build on noMMU
platforms. In order to preserve the previous behavior (CGI interface
is selected by default on MMU capable platforms), this commit makes
the select logic a bit more complicated:
- CGI is selected on MMU-capable platforms if neither CLI or FPM are
selected
- CLI is selected on MMU-less platforms, since this is anyway the
only available interface.
Fixes:
http://autobuild.buildroot.net/results/85ea09188f1e996cb14b4b83a17736c096c569a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rp-pppoe configure script uses AC_PATH_PROG() to find the path of
a number of tools on the build machine. But in fact, those paths are
not used to call the tools on the build machine, but rather to replace
variables in scripts that are executed in the target.
Due to this, if those tools on the build machine are not located at
the same place as their equivalent in the target, the scripts will
fail to run. To address this, we pass the necessary cache variables to
override the autoconf checks.
The path from pppd has been taken from the build result of the pppd
package. The path for setsid, id and echo have been taken from the
build result of Busybox, assuming that full-blown variants of those
tools would be installed at the same location.
Fixes bug #8811.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firejail Security Sandbox
https://firejail.wordpress.com/
Lightweight application sandboxing system using seccomp and kernel
namespaces.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
toolchain-wrapper was not reinstalled. So rules toolchain-external-reinstall,
gcc-initial-reinstall, gcc-final-reinstall didn't work as expected.
In add, normalize variable name: s/TOOLCHAIN_BUILD_WRAPPER/TOOLCHAIN_WRAPPER_BUILD/
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When adding a boolean option to legacy, it should slect BR2_LEGACY, to
trigger the legacy warning.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LIBDIR was used in cpp/examples/MinOZW/Makefile to add dynamic
libraries. However, as it was unset by default, the cross-compilation
could fail if the host had a library such as libnss3.so in /.
To fix this issue, this patch sets LIBDIR to top_buildir if it is unset
Fixes:
http://autobuild.buildroot.net/results/68719fdf1320a69310bada6d3c47654dacdb5898
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just needed to add --with-ldap to POSTGRESQL_CONF_OPTS and add openldap
to POSTGRESQL_DEPENDENCIES when BR2_PACKAGE_OPENLDAP is on
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following suggestion of Yann Morin, rework selection of php
interfaces: use booleans instead of choice to be able to select
multiple interfaces as they are not exclusive. We make sure at least
one of the options is selected.
It should be noted that previously CGI and FPM could not be selected
at the same time. This is now possible. Bug that prevented compilation
of CGI and FPM binaries at the same time has been fixed since PHP 5.4
(https://github.com/php-build/php-build/issues/101).
Legacy handling is added for the two options that are removed, and the
appropriate new options are selected.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages download files (especially patches) with a ? in the
URL. The ? marks the query part of the URL. However, the downloaded
file still contains the ? but from then on it doesn't designate a
query part anymore. Therefore, when fetching from PRIMARY or
BACKUP site over http, the server will report a 404 Not Found.
To fix, we need to replace the ? with %3F. Obviously, this should
be done only when fetching from PRIMARY or BACKUP. For fetching
from the real upstream, the ? really does designate the query part.
Fixes#9371.
Reported-by: Johan Derycke <johanderycke@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: replace 'SECONDARY' by 'BACKUP'.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building this minimal defconfig
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_GCC_VERSION_6_X=y
fails:
In file included from ../../../../libmpx/mpxrt/mpxrt.c:54:0:
../../../../libmpx/mpxrt/mpxrt.c: In function 'read_mpx_status_sig':
../../../../libmpx/mpxrt/mpxrt.h:52:42: error: invalid application of
'sizeof' to incomplete type 'struct _libc_fpstate'
#define XSAVE_OFFSET_IN_FPMEM sizeof (struct _libc_fpstate)
To fix disable libmpx for musl builds, other projects did the same:
3ec2211548http://git.alpinelinux.org/cgit/aports/commit/main/gcc/APKBUILD?id=1830e485126ea9a95d763317fb0c508c1ff297d2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps cryptopp from 5.6.3 to 5.6.5 in order to fix bug
The commit f707b9ef1688d4429ca6239cf2dc236440974681, which Buildroot
was downloading as a patch to fix build with older gcc versions, has
been merged upstream as of 5.6.4, is therefore no longer necessary,
and dropped in this commit.
In addition, Andrey Volkov in the bug report #9321, proposed to add a
number of patches to cryptopp to solve issues when using
tegrarcm. Those patches are the following ones:
- patch 0: moving to autotools as the build system. This is not
strictly a bug fix, and is not necessary.
- patch 1: merged upstream in
"3941be18891a6a87626b7c70f715ca91c61c08c3 Fixed hang on ARM
platforms in Integer::DivideThreeWordsByTwo", which is part of
5.6.5.
- patch 2: merged upstream in
"9fca0c28023a177106cf58a3de6da610f185a6e4 Work around issue on
ARMEL in MultiplyTop and GCC. ARMHF is OK", which is part of 5.6.5.
- patch 3: merged upstream in
"dce2317195a7d9aa77b159fd1beddaf8358f6243 Increase range for GCC
workaround on ARMEL. After speaking with AP from GCC, he states
some issues are still likely present in Master, which is GCC 6.0",
which is part of 5.6.5
- patch 4: merged upstream in
"605744d8260c6ada033805c13ae0b2646acf18d6 Fixed SecBlock append
when "this == t", fixed assert, added validation test (Issue 92)",
which is part of 5.6.5
- patch 5: merged upstream in
"9f335d719ebc27f58251559240de0077ec42c583 Fix the Rijndael timing
attack counter measure", which is part of 5.6.5
- patch 6: merged upstream in
"d8b02cfaafd7350ed0f876cd5da405cff330d537 Fixed m68k detection
(Issue 153)", which is part of 5.6.5
- patch 7: merged upstream in
"c82fd655ed7465db8d21a0e0559c304a7a86d298 Cleared assert in debug
builds (Issue 138)", which is part of 5.6.5
Bottom line: none of the patches proposed by Andrey Volkov are
necessary if we bump to 5.6.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
