proxychains installation does not copy proxychains.conf to
$(TARGET_DIR)/etc anymore so we have to do it manually now.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: GPLv2 / GPLv2+ mix as pointed out by Arnout]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The opkg configure.ac uses the PKG_CHECK_MODULES() m4 macro, which is
provided by the .m4 files installed by host-pkgconf, so we must have
this package as a dependency.
Fixes:
http://autobuild.buildroot.org/results/069fcab6e7dd5a1f07251ba6f52f65643a2f7594/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default (busybox) rc.S implementation requires init scripts to be
named S??*, so rename the openvpn one to S60openvpn (E.G. after network).
At the same time remove the deprecated check-if-custom-skeleton-provided-file
and just always install the init script. People can always fixup/remove
it in their post-build script if needed.
Also name the init script source the same as the destination file name in
TARGET_DIR for consistency.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain IPv6 support isn't optional any more.
New PolarSSL backend besides the usual OpenSSL one.
New small binary option, reduces binary file size ~100 KiB depending on
target architecture.
Removed no crypto option - it still requires some SSL library headers
and it's pointless anyway, after all we're talking about a VPN solution
here.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the moment, the boost build is very verbose, it gives both the
Jam-level command being executed, and the underlying system command
being executed, with lots of newlines. Makes it hard to see where the
failure is when there is one.
So, we reduce the verbosity level to -d+1, which only gives the
Jam-level command. So now, it looks like:
common.copy /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/multi/multi.hpp
common.mkdir /home/test/outputs/e/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/boost/geometry/strategies
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/icu.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_debug.o
gcc.compile.c++ bin.v2/libs/regex/build/gcc-4.7.3/release/threading-multi/regex_raw_buffer.o
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Boost normally allows to build a non-threaded variant by passing
threading=single or a multi-threaded variant by passing
threading=multi.
Unfortunately, the build of threading=single doesn't seem to work any
more, due to bizarre things in the build system. We get "duplicate
target" errors, that according to
http://lists.boost.org/boost-build/2012/11/26582.php should appear if
we ask for both threading=single,multi. But it seems to happen even in
the threading=single case.
Since Boost is such a big C++ beast, it probably doesn't make much
sense to try to support it on toolchains that don't have thread
support. So, we make the boost package depend on thread support. If
someone cares enough in getting Boost to work in a non-threaded
environment, then we can always revert back.
Note that the boost package has no reverse dependencies in Buildroot,
so we don't need to propagate this new dependency anywhere.
Fixes:
http://autobuild.buildroot.org/results/439e72ac74c8058f30977e6abc39acd6379a17d3/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use a more descriptive name, the same of the "toolchain" directory.
- Add missing dependencies to be able to successfully use the target
right after the configuration.
- Move to a better position.
- Documentation it in the help target.
- Use toolchain target in the world target
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Markos Chandras <markos.chandras at imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Acked-by: Samuel Martin <s.martin49 at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Httping is like 'ping' but for http-requests.
Give it an url, and it'll show you how long it takes to connect,
send a request and retrieve the reply (only the headers)
[Peter: Drop ssl option, use make install, misc cleanup]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes:
http://autobuild.buildroot.net/results/86534588d192fe1515ce520c109e884864871d94/
and others.
Webkit includes X11 headers even when configuerd for DirecfFB, because
the test within GNUmakefile.in does not work properly. Autoreconfigure
fails because of incompatibility with buildroot's autotools version.
For now a patch for GNUmakefile.in fixes this problem.
Since webkit release is quite old it doesn't seem to be worth doing more,
on the long run we should bump the version.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current version of strace does not support the Xtensa architecture.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As requested by Peter, add a bit of documentation in the
eclipse-register-toolchain script, and add a few more checks (even
though this script is not intended to be executed manually, which is
also now mentionned in the documentation).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We don't always want all the font sets on small systems.
[Peter: cleanup Config.in, ensure target dir gets created first]
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow to configure the DBus interfaces that the wpa_supplicant
binary should support (old or new or both). Also allow to
enable introspection support on the new DBus interface.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(build-test with all features enabled)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Putting $(TARGET_CONFIGURE_OPTS) after $(MAKE) overrides the Makefile's
CFLAGS and LDFLAGS. Some of these flags are required, however. So
instead pass these things in the environment, which allows the Makefile
to append to the flags.
This removes the need for the patch, because now the correct -I options
are added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following changes LDFLAGS from -static to --static if building
with BR2_PREFER_STATIC_LIB so that various components actually build
statically.
Libtool interpret -static as linking statically with libraries that will not
be installed to the libdir; you have to pass it -all-static to force static
linking. Or, pass --static, which libtool passes on blindly to gcc. gcc
and (GNU) ld both interpret --static the same as -static (although this
isn't documented).
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a package for infozip, compression and file
packaging/archive utility.
[Peter: fix trailing spaces in help, long line]
Signed-off-by: Jan Pedersen <jp@jp-embedded.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libelementary uses the ethumb_client library, but that one is only built
if libedbus is available. So fixup the --enable/disable-ethumb according
to the selection of BR2_PACKAGE_LIBEDBUS.
Fixes e.g.
http://autobuild.buildroot.net/results/14ef98da6b0632e24514fef696fae9a650c90c96
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several projects use the kernel style O=<dir> syntax to build out of tree,
and atleast uClibc doesn't check that it was explictly passed on the command
line, so setting it in the environment breaks the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
No need to recreate a path we already have.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
No need to recreate a path we already have.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support scripts (in support/) may need to parse the .config file, so give
them an easy access to it, by exporting BUILDROOT_CONFIG with the fully-
qualified path to .config.
Also, post-build scripts may need to reference a few locations, so export
those, too.
Note: we export both O and BASE_DIR. Although they are the same, BASE_DIR
is used internally, while O is used on the command line, which makes it a
bit ambiguous to know which to use. As users use O= on the command line,
they will probably tend to use that in their post-build scripts.
Update doc accordingly.
[Peter: fixed typo]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch initially written by Thomas Petazzoni, then reworked and updated
by Laurent Gonzalez, and finally cleaned up by Thomas again.
[Peter: generic-package, deps, download, rename to qwt, move under Qt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
