The PPS feature of gpsd depends on the NTP shared memory time hinting feature.
This patch caused the NTPSHM feature to be enabled whenever the PPS feature
is enabled. This should fix build failures such as the following.
http://autobuild.buildroot.net/results/e58a9a9f884acb6834a8afe4a8a3d056dc509359/build-end.log
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The platform.linux_distribution method was introduced in Python 2.6. Some
of the Buildroot autobuilders still use Python 2.5, which is causing build
failures such as the following.
http://autobuild.buildroot.net/results/045f1f69bac170d8e75cb4952a2e5b4e85a677b8/build-end.log
This patch removes the linux distribution check from the gpsd SConstruct file.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that ncurses has been bumped to 5.9, it installs .pc files for
pkg-config, which allows gpsd to find it properly without the need to
specify a custom location for ncurses5-config.
Since gpsd now uses pkg-config to find the ncurses library, we also
add host-pkg-config in the dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping to 5.9 has two nice side-effects:
* It builds fine on noMMU architectures such as Blackfin, which will
fix build failures like
http://autobuild.buildroot.org/results/cf3e6a95c82b60d63da041293db576a8f21f9136/build-end.log.
* It installs a pkg-config file, which will allow gpsd to find
ncurses properly, without the need to use ncurses5-config, which
means we can get rid of one of our gpsd patches. Thanks to Mike
Frysinger for pointing the new --enable-pc-files option.
After this bump, I build tested a large number of the ncurses reverse
dependencies we have in Buildroot, and they all built fine.
Thanks to Gustavo Zacarias for the investigation on why ncurses 5.9
why segfaulting: it turned out to be caused by the
--enable-broken-linker configure option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in the name of the variable to register the hook,
which prevent the hook from actually being called.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_mmix and BR2_arm_dunno configuration options do not exist, so
there is no chance for these values to be useful in any way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As can be seen on the build result at
http://autobuild.buildroot.org/results/20f1078ef7dc5f187b04c63ef70e8b43acf9bb3a/build-end.log,
D-Bus requires thread support in the toolchain.
This commit adjusts the Kconfig dependencies of D-Bus and all its
reverse dependencies to depend on thread support in the toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt configuration and installation process is a bit strange, and it
leads the .pc files to contain absolute paths to the staging
directory, while it should only contains paths relative to the staging
directory, because pkg-config already adds the path of the sysroot
automatically to the headers and libraries locations.
This allows the 'pkg-config --cflags' results for Qt libraries to be
correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Python support is not cross-compile friendly (uses host compiler,
installs in wrong location, etc.) and nobody needs it at the moment,
so leave that to the first person who will need Python support for
gpsd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix should always be /usr, and destdir must be passed as DESTDIR,
and in the environment, not as a scons argument. Finally, we pass the
sysroot= argument to scons so that it doesn't add -L/usr/lib
parameters when compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following build issue with gcc 4.6:
LINK Xfbdev
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: ../../../os/.libs/libos.a(backtrace.o): undefined reference to symbol 'dladdr@@GLIBC_2.4'
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-none-linux-gnueabi/4.6.1/../../../../arm-none-linux-gnueabi/bin/ld: note: 'dladdr@@GLIBC_2.4' is defined in DSO .../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2 so try adding it to the linker command line
.../host/usr/arm-unknown-linux-gnueabi/sysroot/lib/libdl.so.2: could not read symbols: Invalid operation
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It currently fails to build with:
libgpsd_core.c: In function 'gpsd_poll':
libgpsd_core.c:881: error: 'const struct gps_type_t' has no member named 'min_cycle'
libgpsd_core.c:884: error: 'const struct gps_type_t' has no member named 'min_cycle'
and is probably not a very important feature for normal users of gpsd.
The build problem has been reported to the gpsd-users mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 9ba9bfb9a0 inverted the logic to
define $(2)_SUBDIR, breaking the build of things using the _SUBDIR
feature, like the tcl package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like we have AUTOMAKE, AUTOCONF or QT_QMAKE, let the scons
package provide a SCONS variable that points to the scons host binary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix for CVE-2012-2688 (potential overflow in _php_stream_scandir),
CVE-2012-3365 (SQLite open_basedir bypass) and other misc bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/tar/tar-1.26-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/m4/m4-1.4.16-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS allows to pass the correct CC, CXX, CFLAGS,
CXXFLAGS, etc. For example, it allows the elftosb build process to
properly use ccache when available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_glibc function verifies that the C library of the external
toolchain is glibc. To do so, it verified that a file matching
ld-linux*.so.* or ld.so.* was found in the lib/ directory of the
toolchain's sysroot. However, with the Linaro 2012.05 toolchain, the
lib/ directory contains two links named ld-linux-armhf.so.3 and
ld-linux.so.3, which means that the first ld-linux*.so.* wildcard
expression expands to two files, which generates a syntax error for
the "test" program. We replace that with a more elaborate find+wc
combination to determine whether at least one matching file is
present.
The check_arm_abi function verifies the ABI of an ARM toolchain. For
EABI, it tested that the target name ends with eabi. However, with
Linaro 2012.05, the tuple is now arm-linux-gnueabihf (for hard float),
so we have to adjust the logic to accept this additional "hf"
specification in the tuple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Line-up with changes from commit 3367d5ce77
"external-toolchain: run checks even on extracted toolchains"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using one of the package infrastructures, the DOWNLOAD function
uses $(PKG)_SITE_METHOD to determine the appropriate download method,
which is autodetected based on the URI if none was explicitly set.
When the DOWNLOAD function is called directly, for example when
downloading a toolchain, or from a package that does not use one of
the package infrastructures, the SITE_METHOD is not autodetected,
and thus the download defaults to wget.
This patch adds URI scheme detection directly to the DOWNLOAD method,
in case no SITE_METHOD was detected yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
