The CodeSourcery toolchain for SH2-A platforms provide largefile
support, inet RPC, wide char and threads, so adjust the configuration
accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The internal toolchain defaults to thread support enabled (and
most external toolchains have thread support as well), so enable
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move crosstool-NG to package/ and make it an autotarget package.
This requires a new patch (now upstream).
Now, the crosstool-NG toolchain backend only contains enough to build
the toolchain, there's no more reference to building crosstool-NG as
a package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On "make source", just download the required sources, and do not
build the entire toolchain. This requires a new patch against
crosstool-NG (got from upstream).
The "uclibc-source" rule requires an installed and configured
crosstool-NG, so it has to be after the variables declaration.
For consistency, move down the main rule "uclibc".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added the CodeSourcery uCLinux/uClibc toolchain for the SH2A big
endian devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
0.9.29 doesn't seem to build anymore with the toolchain versions in BR
and is very old, so remove it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though MAXARGS 1000 seems large, it wasn't enough for at least
QtWebKit package. This new version does not have any predefined limits.
Closes#3907
Many thanks to Thomas for tracing the source of the build error.
[Peter: Return rather than abort()]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Reported-by: Thomas Björk <thomas.bjork@home.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately, the official Blackfin toolchains are built without the
shadow password support, so our default Busybox configuration fails to
build.
Therefore, we introduce a new hidden knob
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS, which is set to yes for Buildroot
internal toolchain, for toolchains generated by the Crosstool-NG
backend, for Glibc external toolchains and for Uclibc custom external
toolchains. It is left unset by the Blackfin toolchain profile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* fixed: external toolchain CODESOURCERY ARM2009Q1 downloaded version ARM2009Q3
* add CODESOURCERY ARM2009Q1 for ti dvsdk 3.10.
Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter on IRC reported some build failures for different targets.
They were of two kinds:
- missing/unknown stack unwinding support
- missing *_chk functions
The first is about configure not being able to automagically determine
if stack unwinding support is available for the target. The second is
about fortified build forgetting to build the fortified functions.
This applies to both glibc and eglibc.
After some discussions on IRC with Jacmet, it appears that we can
safely assume both of the following:
- virtually all targets of buildroot will have stack unwinding support
- we do not care about fortified builds (so far)
So, update the bundled crosstool-NG .config file to saner defaults:
- force unwind support
- disable fortified builds
[Peter: fix 'force non-fortified build' sed invocation]
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
1.11.3 is the latest stable version, and it has a few improvements
we'll find usefull. For example, it hasa a boolean option for
disabling the {,e}glibc fortified build (instead of requiring us
to shoehorn it in extra cflags.
Update the config files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the bundled CT-NG config file has no C library configured.
It is quite complex to add and/or munge options in this case.
Now, with one config file per libc familly, it becomes easier.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The arm-softfloat.patch.conditional patches are no longer in Buildroot
since 9af188d883 (October 2009), which
removed support for gcc 3.x and 4.0.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0.9.29 version of uClibc can no longer be selected on AVR32 since
December 2009 (b642f7eefb). Therefore,
those two patches are now completely useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent commit adding the external toolchain wrapper has broken the
support for external toolchain. The check_arm_eabi, check_cplusplus
and check_cross_compiler_exists functions were using TARGET_CC, which
points to the toolchain wrapper, but at the moment those functions are
called, the wrapper hasn't been generated yet.
We fix this by passing to these functions the path to the C or C++
compiler they should use for their tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CodeSourcery toolchain listed is only for SH4A devices.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we use a wrapper for external toolchains (and internal ones
default to the correct setting), we no longer need to explicitly pass
sysroot/march/mtune/mabi/floating point mode in TARGET_CFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a simple toolchain wrapper for external toolchains, which forces the
correct sysroot/march/mtune/floating point options needed to use it
with buildroot.
With this in place the external toolchain behaves similar to the internal
ones, and the special handling can be removed. This also means that the
toolchain is usable outside buildroot without having to pass any special
compiler flags.
Also adjust the downloadable external toolchain support to install under
HOST_DIR so it can be used after the temporary build files are removed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Make mpc mandatory since we are probably building bleeding-edge
* Change snapshot naming convention to match the source
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mklibs is a broken option, so mark it as so pending a proper fixup or
punting it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add OpenMP support in gcc as an option instead of dynamically enabling
it when threads are present.
Also fix it up since we never installed libgomp to the target or staging
thus it was never really functional.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
See uclibc #2089 for details.
This is still not included upstream, but lets include it anyway as
several people have been running into the issue.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
See uclibc #2089 for details.
This is still not included upstream, but lets include it anyway as
several people have been running into the issue.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update uClibc snapshot version config to avoid build stalls.
This time we take care of the new UCLIBC_HAS_FTS and
UCLIBC_HAS_BACKTRACE options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.6.0 to the toolchain repertoire:
Target gcc is known to be broken in some scenarios.
This version is considered experimental so things may break.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make target gcc a more usable option.
* Nuke duplicate libgcc_s*.so* in /usr/lib since it confuses target gcc
* Copy *crt*.o files to the target system to unbreak gcc
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add inotify_init1 system call support to uclibc 0.9.31.
Required for modern versions of udev.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add SOCK_CLOEXEC and SOCK_NONBLOCK support to uclibc 0.9.31.
Required for modern versions of udev.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depending on some setting (which? Arch? Others?), the dynamic linker
can get different names. Some times, it is named ld-linux.something.so,
other times, it is ld.so.1, and maybe other variants as well...
The fix is to always copy ls*.so, even if it is a symlink: we create
the destination file by its SONAME, and if ld*.so matches more than
one file, that's no issue, as they would all get the same SONAME (being
symlinks ones to the others).
Split long lines at the same time.
Reported-by: Ettore Campion <ecampion@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the same time, also use the new upstream location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have to ensure that the sysroot created while building the
toolchain will be the one we later search for libraries. So:
- hide the sysroot name prompt from the ct-ng menu.
- force the sysroot name to be 'sysroot'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These patches do not build with more recent versions of uClibc
going back as far as at least 2008. More recent compiler versions
seem to do fine without these patches, so lets remove them so
libstdc++ locale support will actually build for gcc 4.2.4.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the following error when using GDB with gdbserver:
warning: Can not parse XML target description; XML support was disabled at compile time
Remote 'g' packet reply is too long: <very long line of hex chars>
[remote debugging does not work]
Use $(HOST_CONFIGURE_OPTS) so expat is found.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch is required to build gcc 4.2.4 libgcc with dwarf2
unwinding support enabled.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc_target wants uclibc_target which is now first stage uclibc (not
real, from the NPTL build stage addition).
This triggers gcc-final to be rebuilt (albeit cached) and reinstalled,
thus touching all the stamps around and triggering a rebuild of
gcc_target.
Switch to $(STAMP_DIR)/gcc_libs_target_installed instead so that we only
depend on the last stage of cross gcc being installed to rebuild.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the default .config file.
Remove now unnecessary patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This requires removing "deprecated" markings from gdb-6.6, but this isn't
that big of a deal. That is the last version with Blackfin support at the
moment and we're in the process of getting mainlined.
[Peter: only mark as undeprecated on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add BSD endian conversion routines (backport from 0.9.32 / git).
Required to use a modern udev.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed out on the list, using sysroot rather than sys-root is less
confusing, as this is how it is referred to in the GCC manual.
So rather than changing BR, patch ct-ng to use sysroot instead.
The next ct-ng release will use 'sysroot' as well by default.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
crosstool-ng would normally delete its installation directory before
installing the toolchain to ensure it wouldn't get confused by an earlier
build. Now that we're installing directly into HOST_DIR/usr, this doesn't
work very well - So get rid of the rm's.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Simplifies code and helps us when we add SDK support in the future.
With this we no longer need to copy headers/libraries to STAGING_DIR either.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use unknown for the vendor part of the tuple, and add $arch-linux- symlinks,
similar to how it's done for the internal toolchain, rather than using
buildroot_ctng and unknown symlinks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages need to know whether the MMU is in play, so add a toolchain
option to expose the feature to them.
[Peter: only show option on archs where it makes sense]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
WITH_TARGET_{GMP/MPC/MPFR} is unneeded since we are providing a sysroot.
It also breaks build-gcc under certain conditions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We want to keep a copy around for the future SDK functionality.
Also it's a better fix for bug #1051.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reset them early in top-level Makefile to ensure they're keept unset
all the way through the build process.
This also removes the requirement of these variables being unset
globally prior the build.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's really not very useful, all it does is install a target
strace and ldd in a target_utils directory in staging.
While at it clean up the strace makefile a bit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* 0.9.32 config needs UCLIBC_HAS___PROGNAME defined or we stall when
program invocation name is enabled.
* Mirror 0.9.32's config to snapshot for consistency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move uclibc host tools (ldd/ldconfig) to host dir.
They were previously installed in the staging dir.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert sstrip to a proper gentargets package
* Use openwrt svn version, it's basically the same one we used
* Change the hooks from old toolchain/sstrip to new package/sstrip
* Drop the old toolchain/sstrip directory
* sstrip for the target is now in Package -> Development
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpc to a proper autotargets package
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpfr to a proper autotargets package
* Bump to version 3.0.0-p8
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert gmp to a proper autotargets package
* Bump to version 5.0.1
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having to require svn, git or bzr unconditionally, only
require them when one package needs them to be downloaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In e6633fd2e3 I did crap, and added a
quietization inside a shell command, which was already quietized. This
was stupid, and is fixed by this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the support of custom external toolchains, we forgot to touch the
$(STAMP_DIR)/ext-toolchain-checked stamp file, which means that the
toolchain was re-checked and re-installed at everyt build.
At the same time, quietize a bit other stamp files touch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ARCH_SUBDIR is a shell variable, so it should be referenced with
$${ARCH_SUBDIR}. Without this, no symbolic link is created, and the
external toolchain fails to work if the non-default multilib variant
is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
unzip is needed to uncompress at91bootstrap, so let's add it as a
dependency. This can be discussed, and if we think it shouldn't be a
new dependency, we can also build a host-unzip.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, Crosstool-NG hides all the details of the toolchain build
process. However, this is inconsistent with the typical Buildroot
build, and the rotating progress thing makes log file resulting from
redirecting the Buildroot output a bit unusable. Therefore, switch the
Crosstool-NG configuration to a more verbose default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_NEEDS_GETTEXT was already set to y for Buildroot internal
toolchain and external toolchains based on uClibc, but wasn't set for
toolchains based on uClibC built by the Crosstool-NG backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgomp needs thread support on the target to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, the user is responsible for
telling Buildroot what the configuration of the toolchain is. In order
to make sure that the selection is correct, we already perform checks
against the configuration of the uClibc in the selected external
toolchain. This commit adds the check for thread support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_USE_SSP option is only used inside the uClibc build, so only
meaningful for Buildroot internal toolchains. Therefore, the option is
moved to the right location so that it isn't visible when working with
external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already handle the stripping of libraries in $(TARGET_DIR) at the
global level, so there's no need to have toolchain-specific option and
code for this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of letting the user define all the details of his external
toolchain, we define a set of profiles for well-known external
toolchains (CodeSourcery ones only at the moment, can easily be
extended with other toolchains).
Once a profile has been choosen, the user is offered the choice of
either letting Buildroot download and install the external toolchain,
or (as before) to tell Buildroot where the toolchain is installed on
the system.
We of course provide a "custom profile", through which the user can
configure Buildroot to use a custom external toolchain for which no
profile is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some helpers had their final line ending with a semi-colon, some did
not. For consistency, remove the final semi-colon from all helpers,
it's the responsability of the caller to add the final semi-colon as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turn BR2_LARGEFILE, BR2_INET_IPV6, BR2_INET_RPC, BR2_USE_WCHAR,
BR2_ENABLE_LOCALE and BR2_PROGRAM_INVOCATION into hidden options.
Then, for Buildroot toolchains, external toolchains and Crosstool-NG
toolchains, provide visible options that selects the hidden options.
This allows :
* To show a different label and help text in the case of Buildroot
toolchain (do you want to enable feature X ?) and in the case of
external toolchain (is feature X available in your toolchain ?)
* To not show any option when a glibc external toolchain is selected
(since glibc is assumed to support all of largefile, IPv6, RPC,
WCHAR, locale and program invocation) and have them all selected in
that case.
There is some amount of duplication between Buildroot toolchain config
options and Crosstool-NG toolchain config options, because kconfig
doesn't allow to source the same Config.in file twice (even if under
mutually exclusive conditions). This duplication is more readable that
the hack that consists in splitting files in multiple pieces.
However, this commit changes the name of the options visible in the
configuration interface, so existing .config files will have to be
updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Old-style kernel headers got removed almost 2 years ago, so get rid of
the seperate kernel-headers-new.makefile file and move the content
to the main kernel-headers.mk.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is needed when custom/snapshot kernel headers are selected.
Buildroot expects to find dl/linux-2.6.tar.bz2 and also expects
it to extract to output/toolchain/linux-2.6, but if you tar
custom kernel sources directory can be anything, etc. linux-git.
In that case buildroot would extract it to output/toolchain/linux-git.
So fix this behaviour, by using tar strip-directory/component.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* ccache is now a normal package (both for the host and the target).
* ccache option is now part of the "Build options" menu. It will
automatically build ccache for the host before building anything,
and will use it to cache builds for both host compilations and
target compilations.
* bump ccache to 3.1.3
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the RPC option down to uClibc config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the IPv6 option down to uClibc config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the LFS option down to uClibc config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the locales option down to crosstool-NG config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Push the wide-char options down to crosstool-NG config
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some C libraries, it can be necessary to push the BR settings
down to the libc configuration file. Prepare the infrastructure.
(Note: it will apply only to uClibc for now, and although eglibc
can also be configured, it is not currently supported)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before we can munge the uClibc .config file, we have to use a copy.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Depends on:
- GNU awk --> host-gawk
- GNU automake --> host-automake
Remove dependency on 'cvs'. cvs is used to retrieve newlib,
which is not supported under Buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Copy of the glibc quadfloat intrinsics that gcc generates.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gcc patch that adds hfleon (fpu,v7), hfleonv8 (fpu, v8), sfleon (softfpu,v7),
sfleonv8 (softfpu,v8) SPARC variants. Default cpu is selected with --with-cpu.
Adds leon pipeline descrption to gcc.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gcc configuration switch --with-cpu. Uses newly added
BR2_GCC_TARGET_CPU from the target config.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the top level takes care of stripping for us, and some file formats
cannot be stripped safely (like FLAT which will error out), simply punt
the manual stripping from the gdb package.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We've had objective C support in the tree for many years, but somehow
the BR2_GCC_CROSS_OBJC option (similar to the other BR2_GCC_CROSS_*
options) has disappeared.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Default HOST_CFLAGS to -O2, so host tools (like the cross compiler) are
built with optimization by default.
Based on a patch by Will Newton <will.newton@gmail.com>.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2707
It's not only for kernel headers, and the kernel headers .mk file
isn't included for crosstool-ng toolchain, which broke linux/u-boot/..
builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And all the infrastructure surrounding it. A broken sed implementation
is quite rare nowadays, as seen by the fact that the current host-sed
support has been broken for a while, so just get rid of it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using two '=' for string comparison is a bashism.
Revert to using one, as stated in POSIX 1003.1-2008.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The new DL_MODE variable dispatches between the various download
implementations of each method (Git, Subversion, Wget) to deal with the
normal download (default mode, 'DOWNLOAD'), the source-check
('SOURCE_CHECK') and to show the external dependencies for external-deps
('SHOW_EXTERNAL_DEPS').
For the latter, the legacy script wget-show-external-deps.sh is no
longer required as $(WGET) isn't called directly anymore but always
through the DOWNLOAD helper.
Signed-off-by: Maxime Petazzoni <maxime.petazzoni@bulix.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch introduced by commit
1ed2e4fffd must also be added to gcc
4.2.2 to let the AVR32 toolchain build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The problem fixed by 60f945e47a is in
fact not limited to the AVR32 architecture, as reported by Will Newton
on the list. The issue is the combination uClibc 0.9.31 with gcc 4.2,
C++ support and locales.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Check in toolchain/dependencies/dependencies.sh if an UTF-8 locale is
properly present on the system before trying to build a locale enabled
toolchain. As this test is only needed when a locale enabled toolchain
is going to be built, we pass the configuration file path to the
dependencies.sh script so that it can grep for the current value of
various options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When no UTF-8 locale is available on the host system, uClibc can't
generate some stuff it needs to compile a C library with locale
support. Unfortunately, as gen_wc8bit message is shown on stdout and
the stdout of gen_wc8bit is redirected to a file, the user don't see
anything, as reported at
http://lists.busybox.net/pipermail/buildroot/2010-May/034177.html.
Those two patches fix the problem for uClibc 0.9.31 and 0.9.30.3. It
has been submitted upstream:
http://lists.uclibc.org/pipermail/uclibc/2010-August/044256.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The <tuple>/lib* symlinking added by 3c77bab2ee needs to
be moved up to the gcc-intermediate step now the NPTL stuff is merged,
otherwise 64bit builds fails (lib64 already created).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5575d205c (toolchain: remove multilib) we were no longer passing
--disable-multilib, which broke builds for multilib-capable archs (like
x86-64, ppc, ..).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It fails to build with:
ctype_members.cc: In constructor 'std::ctype_byname<_CharT>::ctype_byname(const char*, size_t) [with _CharT = char]':
ctype_members.cc:59: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:60: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:61: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
make[5]: *** [ctype_members.lo] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch modifies current toolchain build sequence so that
NPTL enabled toolchain can be built. The new sequence works
well with linuxthreads as well.
It introduces a new pass for gcc cross compilation. The new
sequence is binutils->gcc-initial->linux-headers -> uclibc-configured
(some cheats to generate phony shared libc.so and libm.o)
-> gcc-intermediate(with shared lib support) -> uclibc -> gcc-final
I also added a new sample config arm_nptl_toolchain_defconfig which
builds the toolchain and busybox.
I have only tried it on arm. However it should work for other
architectures which support NPTL on uclibc e.g. mips, sh, x86, ppc, x86_64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The cross-gdb is supposed to be part of the external toolchain, so
Buildroot does not need to build it. Moreover, GDB_HOST build
currently fail with:
ln -snf ../../bin/arm-unknown-linux-gnueabi-gdb \
/home/test/outputs/test-48/staging/usr/arm-unknown-linux-gnueabi/bin/gdb
ln: creating symbolic link `/home/test/outputs/test-48/staging/usr/arm-unknown-linux-gnueabi/bin/gdb': No such file or directory
And even worse: they overwrite the cross-gdb of the external
toolchain!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that two packages (tremor and libsvgtiny) are being downloaded
from svn, svn becomes a mandatory tool to run Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supporting multilib is much more than just passing --enable-multilib
to gcc. You have to actually build the C library several times (once
for each multilib variant you want to support in your toolchain), and
to pass MULTILIB_OPTIONS/MULTILIB_EXCEPTIONS values to gcc to let it
know the set of multilib variants you're interested in.
Since we'll probably never support multilib toolchains in Buildroot,
just get rid of this BR2_ENABLE_MULTILIB option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a very advanced option, and it seems, according to
http://choices.cs.uiuc.edu/exceptions.pdf that SJLJ exceptions aren't
really interesting.
Users really interested by this can always use the
BR2_EXTRA_GCC_CONFIG_OPTIONS is they want.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Handle the internal toolchain backend mechanism the
same way we handle other backends.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Including a bunch of Makefiles with wildcard makes it impossible to add
new toolchain backends. Avoid that by namely including needed files.
The external toolchain still needs to include all the toolchain/*/*.mk
sub-makefiles, as they are needed to build a toolchain that runs on the
target. It is to be noted that the cross-toolchain is not built in this
case, as the make-targets to build the cross-toolchain are not present
in the $(BASE_TARGETS) variable, which is later used to create the
dependency rules.
Also, the comment 'Explicit ordering' has been removed, as it is mis-
leading. It is make's responsibility to create the proper ordering based
on the dependency rules it finds in the Makefiles
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rename the external toolchain directory.
When new backends are here, it will be easier to sort them out
if they are all prefixed the same way.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The helper functions used for external toolchains may also be useful
to alternate toolchain backends (currently, the external toolchain is
the sole user).
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is already part of the gcc configure options through the
BR2_CONFIGURE_BUILD_TOOLS variable (in toolchain/Makefile.in).
Additionnally, the value that was passed in the AVR32 specific case
was incorrect: it was $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin
instead of $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The variable BR2_SYSROOT_STAGING_DESTDIR is no longer used, since now
the prefix for gcc is already set to the correct location.
The variable BR2_SYSROOT_TARGET_DESTDIR was already unused.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross binutils and cross gcc are actually going to be executed
from $(STAGING_DIR)/usr, so the correct prefix is $(STAGING_DIR)/usr
and not /usr.
This also fixes what is known as the "AVR32 toolchain build failure",
which was due to the fact that the prefix directory wasn't writable
(since it was /usr).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit solves bug #1051. The problem in this bug in that WebKit
compiles a sample C program, which uses WebKit. As WebKit is written
in C++, even though the program it built with CROSS-gcc, it must be
linked with libstdc++. However, CROSS-gcc can't find the libstdc++ has
it's hidden inside <sysroot>/<tuple>/lib.
Therefore, this commit creates a symbolic link <sysroot>/<tuple>/lib
-> <sysroot>/lib before running the CROSS-gcc installation. While this
may look like a hack, this is the solution used by both Crosstool-NG
and OpenWRT.
Moreover, with this symbolic link in place, I think bug #1741 may also
be solved. The problem in this bug is that the linker tries to link
against /lib/libc.so.0. This is due to the fact that the linker finds
a libc.so script file in the original toolchain location and not
inside the copy of the toolchain sysroot in $(STAGING_DIR). As the
script file is found outside of the current toolchain sysroot, ld
considers the script has non-sysrooted, and therefore doesn't prefix
all paths found in the script file (such as /lib/libc.so.0) with the
sysroot path, leading to the failure.
So, in details, this commit :
* Adds a BR2_ARCH_IS_64 invisible config knob that is used to know if
the arch is a 64 bits architecture or not.
* Creates the <sysroot>/<tuple>/lib -> <sysroot>/lib symbolic link,
and the <sysroot>/<tuple>/lib64 -> <sysroot>/lib64 symbolic link if
needed.
* Fixes the external toolchain sysroot detection code so that the
'sed' replacement is done *after* the readlink -f evaluation.
I have tested this by building ARM, x86 and x86_64 toolchains with
Buildroot, and then use these toolchains as external toolchains to
build a full X.org/Gtk/WebKit/Midori stack. I have also done a
complete ARM Buildroot internal toolchain build with the same full
X.org/Gtk/WebKit/Midori stack.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just as we did to fix target-gcc, pass CXX_FOR_TARGET when building
target g++, and remove useless copies of g++ and c++.
Tested on ARM by compiling a simple C++ program using <iostream> on
the target and running it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When doing the "make install" of target, three identical copies of gcc
are installed in $(TARGET_DIR)/usr/bin:
039adcc582c365f12ba6fc5f96098128 arm-unknown-linux-uclibcgnueabi-gcc
039adcc582c365f12ba6fc5f96098128 arm-unknown-linux-uclibcgnueabi-gcc-4.3.5
039adcc582c365f12ba6fc5f96098128 gcc
This patch removes the first two copies and keeps only the common "gcc" one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that $(STAGING_DIR)/usr/bin is no longer in the PATH, we need to
pass the absolute paths to $(TARGET_CC) when building the target gcc
compiler.
This commit fixes the target gcc build problem reported on the list. I
have successfully been able to build a target gcc for ARM, use it to
compile a hello world application on the target and run this
application.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable is used only once, so let's just hardcode its value at
its call site.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We haven't had any updates to the java packages in a long time,
gcj in 4.3.x doesn't build, and 4.4.x is missing ecj1, so it cannot
have many users.
Mark it as broken and remove during the 2010.11 cycle, unless someone
steps up to maintain it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 7192668 introduced a wrong spelling of BR2_TOOLCHAIN_EXTERNAL_GLIBC
that prevented libnss_files.so and libnss_dns.so from being installed.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that TARGET_CC contains several space-separated words, it must be
used quoted everywhere.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the changes to TARGET_CC/TARGET_CXX to include the --sysroot
option, these variables not only contain the path to the compiler, but
also the --sysroot option. For that reason, we cannot anymore just use
"test -x" to test for the compiler presence. Instead, we see if
$(TARGET_CC) -v and $(TARGET_CXX) -v return a zero status.
Moreover, --sysroot now needs to be filtered out of $(TARGET_CC) and
not $(TARGET_CFLAGS) when asking the toolchain for its original
sysroot and arch sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain and internal toolchain cases both need to use
the --sysroot option, and they have almost identical
LDFLAGS/CFLAGS/CXXFLAGS definition, so we can factorize these
definitions.
Moreover, the --isysroot option is implied by --sysroot so there's no
need to specify both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#2143
Fixes crash on static linking without stdio / x86. Both patches are from
upstream uClibc.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the function copy_toolchain_lib_root was copying a given
library to the target filesystem by assuming that it should be at the
same place it was in the toolchain sysroot.
However, with Buildroot hiding libstdc++ in
/usr/<target-name>/lib(64), this isn't correct, and it is probably
safer not to rely on the toolchain organization anyway.
Therefore :
* Instead of having a single EXTERNAL_LIBS variable, we now have
LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS, which respectively
list the libraries that should be copied to /lib and /usr/lib. As
of today, only libstdc++ is part of the second list.
* The copy_toolchain_lib_root takes another argument, which is the
destination directory of the library, relative to $(TARGET_DIR)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Most toolchains have their libraries either in /lib or /usr/lib
relative to their ARCH_SYSROOT_DIR. Buildroot toolchains, however,
have basic libraries in /lib, and libstdc++/libgcc_s in
/usr/<target-name>/lib(64).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With uClibc 64 bits toolchain, the dynamic loader is named
ld64-uClibc.so.0 and not ld-uClibc.so.0. So, this commit adjust the
uClibc detection code for external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Create lib64 -> lib and usr/lib64 -> usr/lib symbolic links in the
target and staging directories. This is needed for some 64 bits
toolchains such as the Crosstool-NG toolchains, for which the path to
the dynamic loader and other libraries is /lib64, but the libraries
are stored in /lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On 64 bits glibc toolchains, the dynamic loader is named
ld-linux-x86-64.so and not simply ld-linux.so. So, adjust the
detection of the C library accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of copying all directories in "etc lib sbin usr", check that
each of them exists before doing the copy. This is only to avoid an
harmless error message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For the detection of the ARCH_SYSROOT_DIR (which contains the C
library variant specific to the compiler flags), we used to pass only
the -march argument instead of the full TARGET_CFLAGS. This was done
because TARGET_CFLAGS contains --sysroot, and we don't want to tell
here the compiler which sysroot to use, because we're specifically
asking the compiler where the *normal* arch sysroot directory is.
Unfortunately, there are some multilib variants that aren't decided
only based on -march, but also on -msoft-float or other compiler
flags. Therefore, we take the opposite approach: pass the full
TARGET_CFLAGS, from which we have stripped the --sysroot option.
For example, this allows a PowerPC CodeSourcery toolchain, on which
we're using the soft-float multilib variant, to work properly as an
external toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
External toolchains using Glibc have different names for the dynamic
loader. Some of them name it ld-linux.so.*, while some others (such as
the PowerPC and MIPS CodeSourcery toolchains) name it simply ld.so.*.
Therefore, we fix the glibc detection code to handle this case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
