Commit fde2605765 (Makefile: test before search for kernel modules)
changed the way we strip kernel modules, but it fails when modules aren't
available (as test -d returns with a non zero exit code).
Fix it by including the test -d call in a proper shell conditional.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'find $(TARGET_DIR)/lib/modules' used to find and strip kernel
modules fails when no kernel modules have been installed. While the
'|| true' prevents the entire build from failing, there are still some
error messages displayed, which is not nice.
Instead, test if the directory exists before doing the find. We also
remove the '|| true' in order to really abort the build if a
problematic error occurs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
When attr is built static-only, it forgets to install its libattr.a
file, which leads to the build failure of packages such as 'acl' that
rely on attr.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Wandboard is a low cost iMX6 system consiting of an EDM standard
processor module and a small base board.
http://www.wandboard.org
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not clear why 300-libstdc++-pic.patch pre-applied to
gcc-4.2.2-avr32-2.1.5 seems to have come from some older version
of gcc (as early as 4.0.3). This older patch incorrectly refers to
object files to be included in the library libstdc++_pic.a as *.o,
while their location seems to be in .libs/*.o (see the contents at
e.g. https://github.com/ZigFisher/Midge/blob/master/toolchain/gcc/4.0.3/300-libstdc%2B%2B-pic.patch ).
The same patch for gcc 4.1.0 refers to the files as .libs/*.o (see
https://github.com/ZigFisher/Midge/blob/master/toolchain/gcc/4.1.0/300-libstdc%2B%2B-pic.patch ).
This patch corrects rules in Makefile.in.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'cut' needs to be invoked with the -s option to make sure it doesn't
print anything when the delimiter isn't found. This is particularly
important for the charmap detection, because UTF-8 is appended if
the charmap is empty. But without -s, it will never be empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for a,out on ARM will be dropped in Linux 3.11 (and is already
missing in the -rc).
m68k is marked BROKEN in Buildroot, so it is never ever tested.
The x86 familly is the only one left with support for a.out, now.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt5 upstream URL has changed, which leads to build failures in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment should only be displayed if BR2_PACKAGE_LIBGTK2
is not selected.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See Source/WTF/wtf/Platform.h. Webkit is only supported for
arm, armeb, i386, mips, mipsel, powerpc, sh, sparc, x86_64.
[Thomas P: propagate dependency to the midori package.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
runtime dependencies are handled in Config.in
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux Containers (LXC), provides the ability to group and isolate
of a set of processes in a jail by virtualizing and accounting the
kernel resources. It is similar to Linux-Vserver or Openvz.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the duma memory debugging library. This is based on an earlier
patch by Baruch Siach, with minor changes to build for latest
buildroot sources.
[Thomas P: misc cleanups, drop non-C++ support as it wasn't compiling,
added thread dependency.]
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the <pkg>-rebuild and <pkg>-reconfigure targets were meant
to restart the build of the package from a given step (build for
<pkg>-rebuild and configure for <pkg>-reconfigure) and then re-create
the entire root filesystem.
However, further discussion from the community has shown that this is
not really the desired behavior: we instead want <pkg>-rebuild and
<pkg>-reconfigure to only take care of rebuilding the given package,
and not the entire root filesystem.
People willing to rebuild this package and the root filesystem can do:
make <pkg>-rebuild all
[Thomas P: rewrite commit log, since it's not fixing a bug, but
instead changing what was an intended behavior. ]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying a floating tag like HEAD for a repository version is bad practice,
as it results in non-reproducible builds. This patch removes the default
assignment of HEAD as version when a custom git repository is used for the
Linux kernel.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
n32 is not supported in Sourcery CodeBench toolchains.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
An MVC web framework for Lua
[Thomas P: add patch to fix installation procedure, and use the
provided Makefile for installation. Remove build-time dependency on
wsapi since there's nothing to build in 'orbit'. Remove run-time
dependency on 'rings', since it's not clear why Orbit would depend on
that.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltrace requires that libunwind is built with backtrace() support.
For the internal uClibc toolchain we don't enable it, and for external
uClibc toolchains we can't know.
It's also unavailable for static uClibc toolchains.
So just disable libunwind support for uClibc toolchains in general.
Fixes:
http://autobuild.buildroot.net/results/ee0/ee037a19590fb85c64f97f78f74bcfd4d7766706/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the custom INSTALL_TARGET doesn't consider static builds it breaks
horribly and there's no need with the current version since it works
just fine with a little varnish to remove samples. Fixes:
http://autobuild.buildroot.net/results/5a6/5a62c38ec621d49230d76981db6024035e88804a/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Magic++ bindings are built only with C++ and WCHAR toolchains.
Add a WCHAR toolchain check for the magick++ config fixup.
Looking into the future the fixup shouldn't bail on a missing file so we
can avoid awkward kludges for packages that have many options and config
files.
Fixes:
http://autobuild.buildroot.net/results/33a/33ac4b17866a64379b7bab3c0549f6e075c98dde/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luasql is a uniform frontend for multiple DB backends.
[Thomas P: update version to 2.3.0 available from Github, as suggested
by François Perrad. Fix .mk header. Use a LUASQL_MAKE_FLAGS variable,
which is more commonly used.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LuaSec is a Lua binding for OpenSSL library to provide TLS/SSL
communication.
[Thomas: adjust header in .mk file, add missing 'mkdir -p' before
installation, remove useless quotes.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change license to GPLv2+, slightly reword Config.in
description, add a BR2_arm dependency.]
Signed-off-by: Paul B. Henson <henson@acm.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This ccache dependency was here to enforce the build order.
It is not needed anymore.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This ccache dependency was here to enforce build order.
It is not needed anymore.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the host-ccache build target from BASE_TARGETS in Makefile
to an actual host prerequisite in support/dependencies. This causes
host-ccache to be built as part of the dependencies, before any real package
is built.
Since the dependencies are built without ccache anyway, there is no need to
set HOST_CCACHE_CONF_ENV anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch forces the plain host compiler to be used during the building of
dependencies, without ccache as it is not yet built.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the building of screen package for ARC
Reported-by: Mischa Jonker <mjonker@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external-toolchain infrastructure creates symbolic links for all
tools in the host directory. However, when buildroot builds its own
version of a cross debugger (BR2_PACKAGE_HOST_GDB), and the toolchain
also provides a cross debugger, there would be two symbolic links for
gdb in the host directory, which is confusing.
An example use case is where the external toolchain only provides a
64-bit gdbserver (e.g. Cavium Networks SDK) but the target is completely
32-bit (e.g. n32 ABI). In this case, using gdbserver on target requires
copying a bunch of 64-bit libraries to the target as well, just for gdb.
In this case, one can let buildroot build both gdbserver as cross-gdb
(both in 32-bit).
This patch modifies the symlink creation so that no gdb (or gdbtui)
symlink is created if buildroot is going to build a cross-gdb.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the addition of root password setting support in buildroot, there have
been a few bug reports in this area ([1], [2]). In these cases, the system
mkpasswd did either not work, or did not provide the options we expect, like
-m <method>.
This patch adds a mkpasswd host package, based on the sources from whois. When
a non-empty root password is set, this package is used as a dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2013-July/075771.html
[2] http://lists.busybox.net/pipermail/buildroot/2013-July/075869.html
[Thomas P: use $(INSTALL) instead of install, put -lcrypt at the end
of build command line to allow gcc to find the crypt() function in
lcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Arnout noted, we removed the BR2_ARM_OABI option without adding the
corresponding option in Config.in.legacy, so users upgrading to
Buildroot 2013.08 with an OABI configuration would get migrated
automatically to EABI without any warning.
This commit introduces such a legacy option, so that such users would
be explicitly warned about the removal of OABI support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
