It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adds an option to invoke the dracut host tool, providing
a configuration file, instead of having a full cpio archive
of the whole target directory.
A default configuration file is provided. It assumes busybox init.
ideally, a different default should be used in case of systemd init, but
that's left for future work.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Dracut is the tool used by desktop distributions to build initrds.
In the embedded world, it can be very useful, too, for instance when
wanting to create an initramfs for a system recovery mode.
Whereas it is definitively possible to achieve this with buildroot, the
process is to have a dedicated buildroot configuration for that, and
perform a full build. Instead of doing that, dracut can pick the needed
binaries/shared libraries, configuration files, or kernel modules from
the 'target' directory.
The advantage is to save build time, and also to have a consistency
between the packages versions taken for the recovery and the production
filesystem.
The principle of dracut is based on the so-called 'dracut modules'. The
modules determine what will be included in the initramfs. For example,
one of dracut's modules checks the kernel modules that are included and
also includes the corresponding firmware blobs.
On the host, they are on host/lib/dracut/modules.d
Each directory as a prefix number for the order of execution, and
at least a "module-setup.sh" script.
Dracut sources all of them, and typically calls the "check()" function,
which is the placeholder for required binaries (that are aimed to be
polulated in the initrd), then the "depends()" function, that lists
other modules to depend on, and the "install()" function, that makes
the actual work.
Dracut was initially thought to work with systems using systemd,
but it can also work without it. Do to so, every "systemd-xxx"
module must be disabled in the dracut configuration file. For
convenience, the 05busybox-init module is provided, to support
busybox init system. Note that this module should *not* be enabled when
using systemd init. It is therefore only installed if busybox init is
selected.
Musl and uClibc make assumptions about the existence of some symlinks
that are not discoverable with readelf. Therefore, another module
05libc-links is provided that creates those links. The module is
installed regardless of which libc is used - the script itself discovers
if the links need to be installed based on which libc is found.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We extend the modules search path to be able to load the package
metadata. Currently, it is only restored when loading those
succeeded, not when it failed.
Restore it to its previous state also in case of error, to avoid
leaking the path further.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is perhaps the most controversial change for Buildroot that can
be written in a two-liner.
Historically, we have used uClibc as our default C library, as
Buildroot was created initially as a test-bed for uClibc, and also
because uClibc made a lot of sense for embedded Linux systems, due to
its smaller size and fine-grained configurability.
Since then, the landscape of embedded Linux systems has changed. Even
though Buildroot happily supports really low-end devices, the vast
majority of Buildroot users are quite certainly running the resulting
system on a reasonably powerful platform, with significant amount of
RAM and storage. In this context, the benefits of uClibc are no longer
that much relevant, and glibc causes less "troubles". Therefore, this
patch proposes to use glibc as our default C library when using the
internal toolchain backend instead of uClibc.
Of course, we will keep the support for uClibc, which remains an
important C library choice, for space-constrained systems, or simply
for architectures that are not supported by glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following libkrb5 build failure raised since the addition of the
package in commit 736c4c1655:
configure: error: in `/home/giuliobenetti/autobuild/run/instance-2/output-1/build/freeradius-server-3.2.0/src/modules/rlm_krb5':
configure: error: cannot run test program while cross compiling
Fixes:
- http://autobuild.buildroot.org/results/3968d611458060480d341bd60f7c50209a0ace15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The "find" and "xargs" commands, from the "findutils" package are used
during the build process. See for example [1].
Even if it's a quite common package which is almost sure to be present
on the host, it should be listed here. When writing new recipes, hooks
and scripts, it is generally safe and portable to restrict to the
host dependencies listed in those prerequisites.
This commit just add the missing "findutils" package in this list.
[1] https://git.buildroot.org/buildroot/tree/Makefile?h=2022.05.1#n737
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are trying to not build the perf documentation. However, the hook
being used to do so was named incorrectly. As a result, the build steps
to disable the documentation were never executed.
Rename the hook from
LINUX_POST_PATCH_HOOKS
to
LINUX_TOOLS_POST_PATCH_HOOKS
to fix the issue.
Fixes: 20b1446669 ("linux/tools: make it a real, separate package")
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following build failure raised since bump to version 9.12.0 in
commit f2eb56459e and
9601603db7
which deleted the internal libatomic_ops:
configure: error: libatomic_ops is required. You can either install it on
your system, or fetch and unpack a recent version into the
source directory and link or rename it to libatomic_ops.
Fixes:
- http://autobuild.buildroot.org/results/4c7a1b690d1b12e39b6b24f8cc8a144f79c73711
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2022-1114: A heap-use-after-free flaw was found in
ImageMagick's RelinquishDCMInfo() function of dcm.c file. This
vulnerability is triggered when an attacker passes a specially crafted
DICOM image file to ImageMagick for conversion, potentially leading to
information disclosure and a denial of service.
- Fix CVE-2022-32545: A vulnerability was found in ImageMagick, causing
an outside the range of representable values of type 'unsigned char'
at coders/psd.c, when crafted or untrusted input is processed. This
leads to a negative impact to application availability or other
problems related to undefined behavior.
- Fix CVE-2022-32546: A vulnerability was found in ImageMagick, causing
an outside the range of representable values of type 'unsigned long'
at coders/pcl.c, when crafted or untrusted input is processed. This
leads to a negative impact to application availability or other
problems related to undefined behavior.
- Fix CVE-2022-32547: In ImageMagick, there is load of misaligned
address for type 'double', which requires 8 byte alignment and for
type 'float', which requires 4 byte alignment at
MagickCore/property.c. Whenever crafted or untrusted input is
processed by ImageMagick, this causes a negative impact to application
availability or other problems related to undefined behavior.
- Update hash of LICENSE (year updated with
80629dfb3f)
https://github.com/ImageMagick/Website/blob/main/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ualpn is not compatible with libressl as stated by upstream in
32546c7caa
resulting in the following build failure:
ualpn.c: In function 'ssl_client_hello_cb':
ualpn.c:2038:16: error: 'SSL_CLIENT_HELLO_RETRY' undeclared (first use in this function); did you mean 'SSL_F_CLIENT_HELLO'?
2038 | return SSL_CLIENT_HELLO_RETRY;
| ^~~~~~~~~~~~~~~~~~~~~~
| SSL_F_CLIENT_HELLO
Fixes:
- http://autobuild.buildroot.org/results/d7d49cfce6f99c59e99c8e15399164fd5ecacc21
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In 96c3b52132 (package/uacme: don't allow ualpn with mbedTLS), the
preference order moved openssl before mbedtls, because ualpn was not
compatible with mbedtls. That caused the preference order in the .mk to
diverge semantically from the preference order in the Config.in.
Indeed, openssl is only selected when neither gnutls nor mbedtls are
enabled, so openssl is clearly leastpreferred crypto backend. But when
both openssl and mbedtls were enabled, then uacme would use opensslC
because of ualpn.
The ualpn limitation was lifted in 6c7b46945e (package/uacme: allow
ualpn with mbedTLS), but the preference order in the .mk was not
restored to match that of the Config.in.
Restore the order in the .mk so that openssl is again treated as the
least-preferred crypto backend.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- split off to its own patch
- write the full commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit aaced92e8c.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 115ee05214.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit f8528acdfd.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 23329364e2.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Freescale extract helper was introduced before Freescale was part
of NXP. Nowadays, we also have NXP packages, and they do use the same
archiving format.
Rename the helper under the now more generic NXP name, so that it is
more logical to also use it for NXP packages. We do not retain the old
Freescale-based name, because we should no longer add Freescale-named
packages; they would most probably be introduced under the NXP name.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr:
- provide the rationale in the commit log
- keep referring to Freescale in comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This helper was introduced before Freescale was part of NXP. Nowadays,
we have NXP packages, and they do use the same archiving format.
Move the Freescale-specific extract helper to a common location, so
that it can be used by other packages in the future.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: provide the rationale in the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update fourth patch to avoid the following build failure with webrtc
raised since commit a40a516c8a:
../output-1/build/pulseaudio-16.1/src/modules/echo-cancel/meson.build:13:0: ERROR: No host machine compiler for 'src/modules/echo-cancel/webrtc.cc'
That is because we removed the C++ language from the global meson.build.
Add it back to the local meson.build in echo-cancel.
The echo-cancel module is always built, but the echo-cancel meson.build
is only included if webrtc-aec is enabled. We only enable it when
webrtc-audio-processing is selected, and that package depends on C++.
Therefore, it is safe to depend on C++ in the echo-cancel meson.build.
Fixes:
- http://autobuild.buildroot.org/results/e60d72268667ed57a254d7552fa2d785e2e21726
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add custom cases to make sure that a random configuration with an empty
git, tarball location or version for xenomai doesn't fail. It reverts to
BR2_PACKAGE_XENOMAI_LATEST_VERSION in these cases.
Fixes:
- http://autobuild.buildroot.org/results/19419759b4add0197b4e629d0b2216c2a07624b2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Drop default value of BR2_PACKAGE_XENOMAI_REPOSITORY
- Add BR2_PACKAGE_XENOMAI_{CUSTOM_VERSION_VALUE,REPOSITORY_VERSION} to
mimick what is done by other packages (e.g. barebox, u-boot)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
alsatplg needs dynamic library since bump to version 1.2.7 in commit
4dc8563363 and
44d3e8aa44:
pre-processor.c:28:10: fatal error: dlfcn.h: No such file or directory
28 | #include <dlfcn.h>
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1173a1ee28a58ce565a3274f35e868c35bb2e04e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
netsniff-ng unconditionally uses pthread_spin_lock since its addition in
commit 500d287b07 and
1a9fbac03c
resulting in the following build failure:
/home/autobuild/autobuild/instance-1/output-1/per-package/netsniff-ng/host/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/10.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: netsniff-ng/tprintf.o: in function `tprintf_flush':
tprintf.c:(.text+0x42c): undefined reference to `pthread_spin_lock'
Fixes:
- http://autobuild.buildroot.org/results/ceadbdea8cc35bfd7d601a6d4b18137f81f61406
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following uclibc build failure on aarch64 raised since bump to
version 6.14 in commit 5292d1cf9a and
9070a04adf:
rngd_rndr.c:34:10: fatal error: sys/auxv.h: No such file or directory
34 | #include <sys/auxv.h>
| ^~~~~~~~~~~~
Strangely enough, there is no autobuilder failure for powerpc64le raised
since version bump to version 6.11 in commit
da83261c9b
Fixes:
- http://autobuild.buildroot.org/results/41d5ab9e67eb0d8af8d789fc94d4366f130a7fb2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix the following sparc build failure with BR2_OPTIMIZE_FAST raised
since bump to version 2.9.19 in commit
65ed981ce0:
cc1: error: argument to '-O' should be a non-negative integer, 'g', 's' or 'fast'
Fixes:
- http://autobuild.buildroot.org/results/e1a330e1a899fcdf4900e9156d62c90813321e30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure without threads raised since bump to
version 9.21.4 in commit e4c81885ed:
CompactDisplay.cpp:13:14: fatal error: pthread.h: No such file or directory
13 | #include <pthread.h>
| ^~~~~~~~~~~
For an unknown reason, previously drbdmon (which unconditionally uses
threads) was always wrongly disabled:
configure:5846: checking whether /home/fabrice/buildroot/output/host/bin/arm-linux-g++ supports C++11 features by default
configure:6141: /home/fabrice/buildroot/output/host/bin/arm-linux-g++ -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.cpp >&5
configure:6141: $? = 0
configure:6149: result: yes
configure:6824: WARNING: No C++11 compiler found, disabling drbdmon build.
The correct activation of drbdmon could be a side-effect of
b235e83409
Fixes:
- http://autobuild.buildroot.org/results/2cc7d771176ccde7539cc93d83e9621d9ada8357
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Github repository mripard/sunxi-mali states to use Lima in place of
sunxi-mali because it's deprecated, but this package is still useful in
Buildroot so I want to move the SITE to my Github fork of the original
repository that already contains a patch to fix a build failure showing
up with Linux version >= 5.15.
The upstream patch fixes missing DMA_BUF module inclusion that leads to
build failure. The patch includes DMA_BUF by using:
MODULE_IMPORT_NS(DMA_BUF);
My idea is to continue to maintain this package in parallel to Lima since
it seems to be still useful.
Fixes:
http://autobuild.buildroot.net/results/8f25c26de737c358b3b43a10737609465b4e1398/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Go 1.19 is a major release with changes to the implementation of the toolchain,
runtime, and libraries.
Dropped patch 0002-cmd-dist-use-gohostarch... as it was merged upstream.
https://go.dev/doc/go1.19
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mips64 is supported since bump to version 1.6.9 in commit
cb648d12fa and
7f185d29aa
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zstd is an optional dependency since bump to version 1.7.0 in commit
bbc52f3ff3 and
afd0a6db2a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set CROSS variable otherwise makedumpfile will use it to undefine the
host architecture through -U__$(HOST_ARCH)__ if $(TARGET) is not equal
to $(HOST_ARCH). This will result in the following build failure since
the addition of the package in commit
adb64a97e7 if aarch64_be is cross-compiled
on a aarch64 host for example:
/home/autobuild/autobuild/instance-5/output-1/host/bin/aarch64_be-buildroot-linux-uclibc-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -g -O2 -Wall -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -DVERSION='"1.7.0"' -DRELEASE_DATE='"8 Nov 2021"' -D__aarch64_be__ -U__aarch64__ -DUSELZO -c -o ./print_info.o print_info.c
[...]
makedumpfile.c: In function 'is_kvaddr':
makedumpfile.c:1547:46: error: 'KVBASE' undeclared (first use in this function)
1547 | return (addr >= (unsigned long long)(KVBASE));
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/e4e10364e1a24099ce31bf20eacf5adedf93e5a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 4dff1be05e (package/libvirt: libvirtd needs C++ for nmap-ncat)
introduce a recursive dependency (really: a circular dependency):
package/busybox/Config.in:33:error: recursive dependency detected!
package/busybox/Config.in:33: symbol BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is selected by BR2_PACKAGE_EBTABLES_UTILS_SAVE
package/ebtables/Config.in:11: symbol BR2_PACKAGE_EBTABLES_UTILS_SAVE depends on BR2_PACKAGE_EBTABLES
package/ebtables/Config.in:1: symbol BR2_PACKAGE_EBTABLES is selected by BR2_PACKAGE_LIBVIRT_DAEMON
package/libvirt/Config.in:44: symbol BR2_PACKAGE_LIBVIRT_DAEMON depends on BR2_PACKAGE_NETCAT_OPENBSD
package/netcat-openbsd/Config.in:1: symbol BR2_PACKAGE_NETCAT_OPENBSD depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
We can't drop the C++ dependency and switch the netcat-openbsd and
nmap-ncat dependencies conditions without adding a glibc dependency.
So always mandate C++ even if is only needed by nmap and not
netcat-openbsd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit f81242ae4f to avoid
the following build failure:
Makefile:575: *** libbsd is in the dependency chain of netcat-openbsd that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Fixes:
- http://autobuild.buildroot.org/results/aada1d92df6cab0d01e27431b7b7483e3d165e79
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
