This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MNano based SBC with 1GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-nano/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Used to launch qemu tests for various qemu architectures.
Neverthless to say that this file skips any other job
different from qemu (only qemu configurations are
runtime tested).
Add the log generated by Qemu to the build artefacts.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As of upstream commit 735eb608637e7bbab4082a541ac802cc919fec22,
available since version v20.1.1, support for Python 2.x has been
dropped, and Python >= 3.5 is required. So we make python-txaio depend
on python3, and remove the python2 test of python-txaio.
We also remove the python-six dependency which is no longer used by
txaio, since upstream commit 62b0e7eaa22769687df1de8f57374cb0a42bdc4d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream commit
c0223223f8,
which has been part of the releases since v20.1.2 has dropped support
for Python 2.x. So python-autobahn is now only available for Python
3.x.
We therefore remove the Python 2.x autobahn tests, and while at it,
drop the python-six dependency, which is no longer needed since
upstream commit
79bd2ba41b,
part of the releases since v20.1.3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MMini based SBC with 2GB of LPDDR4 and 8GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-mini
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit a570f63dd4 (Revert "package/perl-crypt-ssleay: new package")
forgot to deregister the associated test from the gitlab-ci list.
Remove it now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The recent perl-crypt-ssleay, perl-lwp-protocol-https, and
perl-html-parser packages aditions came with associated new
runtime tests, which is good, but forgot to regenerate the
gitlab-ci.yml file with the updated list of tests.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Two simple tests to ensure that openrc boots without any services crashing
with a read only and a read write filing system.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: really check the init process]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This also adds the new tests to the gitlab CI configuration.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Validates an archive can be installed and removed
- Builds an archives that uses postinst and prerm scripts
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9fa2add810 (support/testing: add test for python-avro) added a
test for python-avro but failed to update .gitlab-ci.yml. Do that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple test case that imports the module.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module and instantiates a new
SlidingWindowMapManager class.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This configuration builds a 64bit image for RaspberryPi 4.
Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 600132f8c0 added a test for
python-gobject but failed to update .gitlab-ci.yml. Do that now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This test comprises of four simple steps:
1: Start a new simple project called testsite.
2: Run ./manage.py migrate on the new testsite.
3: Run ./manage.py runserver 0.0.0.0:1234 & sleep 30
- The sleep 30 is necessary as it may take several seconds for
the django server to fully start.
4: Run netstat to ensure the server opened port 1234.
Signed-off-by: Adam Duskett <aduskett@greenlots.com>
[Thomas: use self.assertRunOk() when appropriate]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test starts a simple container with an iperf3 server.
The container is using the tini init system, with a shared rootfs.
An iperf3 client is started from the host to check that the container
is really up and running.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It has python3 and nose for python3! :-)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
That is useful and needed for upcoming introducing stm32mp157a-dk1 board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
