configs/macchiatobin*: drop vendor defconfig, rename mainline defconfig
The support for MacchiatoBin board in U-Boot and Linux has been significantly improved in the past years. So it no longer makes much sense to have a separate build configuration based on older vendor Linux kernel and U-Boot. This commit drops the configuration based on vendor kernel and U-Boot and renames the mainline-based defconfig. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is contained in:
Sergey Matyukevich
Thomas Petazzoni
parent
06d0e99c2e
commit
37da251112
@ -326,8 +326,7 @@ snps_archs38_vdk_defconfig: { extends: .defconfig }
|
||||
socrates_cyclone5_defconfig: { extends: .defconfig }
|
||||
solidrun_clearfog_defconfig: { extends: .defconfig }
|
||||
solidrun_clearfog_gt_8k_defconfig: { extends: .defconfig }
|
||||
solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig }
|
||||
solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig }
|
||||
solidrun_macchiatobin_defconfig: { extends: .defconfig }
|
||||
stm32f429_disco_defconfig: { extends: .defconfig }
|
||||
stm32f469_disco_defconfig: { extends: .defconfig }
|
||||
stm32mp157a_dk1_defconfig: { extends: .defconfig }
|
||||
|
||||
@ -2308,8 +2308,7 @@ F: configs/linksprite_pcduino_defconfig
|
||||
F: configs/orangepi_one_defconfig
|
||||
F: configs/orangepi_pc_plus_defconfig
|
||||
F: configs/orangepi_zero_defconfig
|
||||
F: configs/solidrun_macchiatobin_mainline_defconfig
|
||||
F: configs/solidrun_macchiatobin_marvell_defconfig
|
||||
F: configs/solidrun_macchiatobin_defconfig
|
||||
F: package/armbian-firmware/
|
||||
F: package/hostapd/
|
||||
F: package/rtl8189fs/
|
||||
|
||||
@ -12,32 +12,14 @@ through the serial console.
|
||||
How to build
|
||||
============
|
||||
|
||||
There are two build options: mainline support and vendor support.
|
||||
Default configuration provides the following BSP versions:
|
||||
- Linux v5.6.3 (mainline)
|
||||
- U-Boot v2020.01 (mainline)
|
||||
- ATF v1.5-18.12.2 (Marvell)
|
||||
|
||||
For the mainline BSP, we use:
|
||||
- Linux v4.19.2
|
||||
- U-Boot v2018.11
|
||||
To build images run the following commands:
|
||||
|
||||
For the vendor BSP, we use the sources available from Marvell Github
|
||||
page at https://github.com/MarvellEmbeddedProcessors, which uses:
|
||||
- Linux v4.4.120
|
||||
- U-Boot v2018.03
|
||||
|
||||
At the moment mainline support for the board is a work in
|
||||
progress. Mainline kernel 4.19 enables eth2 in 1Gb (RJ45 connector J5),
|
||||
copper 10Gb interfaces, and automatic configuration of select SFP
|
||||
modules on the SFP cages. The vendor BSP enables more hardware features
|
||||
out of the box, but lacks support for SFP detection and automatic
|
||||
configuration.
|
||||
|
||||
To use the mainline BSP run the following commands:
|
||||
|
||||
$ make solidrun_macchiatobin_mainline_defconfig
|
||||
$ make
|
||||
|
||||
To use the vendor BSP run the following commands:
|
||||
|
||||
$ make solidrun_macchiatobin_marvell_defconfig
|
||||
$ make solidrun_macchiatobin_defconfig
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
@ -74,13 +56,15 @@ Insert the micro SDcard in the MacchiatoBin board and power it up.
|
||||
The serial console is accessible at the micro-USB Type-B connector
|
||||
marked CON9. The serial line settings are 115200 8N1.
|
||||
|
||||
Note: the following text only applies to the vendor BSP from
|
||||
solidrun_macchiatobin_marvell_defconfig.
|
||||
U-Boot environment
|
||||
==================
|
||||
|
||||
By default Marvell provided U-Boot will load its environment from the
|
||||
SPI flash. On the first boot SPI flash may be empty or it may contain a
|
||||
legacy environment that prevents proper boot. Then the following
|
||||
commands can be used to boot the board:
|
||||
By default current configuration provides U-Boot that keeps environment
|
||||
in SD/eMMC. However, if needed, u-boot-fragment.config can be tweaked
|
||||
so that U-Boot will keep environment in SPI flash. On the first boot
|
||||
SPI flash may be empty or it may contain a stale environment that
|
||||
prevents proper boot. Then the following commands can be used
|
||||
to boot the board:
|
||||
|
||||
=> ext4load mmc 1:1 0x01700000 /boot/uEnv-example.txt
|
||||
=> env import -t 0x01700000 $filesize
|
||||
|
||||
@ -1,44 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="mcbin"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for Marvell MacchiatoBin"
|
||||
|
||||
# Firmware
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/atf-marvell.git"
|
||||
# This commit corresponds to release armada-18.09.4
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="711ecd32afe465b38052b5ba374c825b158eea18"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0"
|
||||
BR2_TARGET_BINARIES_MARVELL=y
|
||||
BR2_TARGET_MV_DDR_MARVELL=y
|
||||
|
||||
# U-Boot
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_GIT=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/u-boot-marvell"
|
||||
# This commit corresponds to armada-18.09.1, based on u-boot 2018.03
|
||||
BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="8fe403172c58440bcfbb3724242301c0108eff5b"
|
||||
BR2_TARGET_UBOOT_BOARDNAME="mvebu_mcbin-88f8040"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
|
||||
# Kernel
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,MarvellEmbeddedProcessors,linux-marvell,linux-4.4.52-armada-17.10)/linux-linux-4.4.120-armada-18.09.tar.gz"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v8_lsp"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin"
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
|
||||
# rootfs
|
||||
BR2_TARGET_ROOTFS_TAR=y
|
||||
BR2_TARGET_ROOTFS_EXT2=y
|
||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/solidrun/macchiatobin/genimage.cfg"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/macchiatobin/post-build.sh"
|
||||
Loading…
Reference in New Issue
Block a user