The output of "/etc/init.d/S40network start/stop" was lacking a
newline due to the usage of printf. Fix it by echoing the status, like
we do in other init scripts.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cairo package fails to build on some architectures:
BR2_TOOLCHAIN_HAS_LIBATOMIC is enabled, but libatomic is in fact not
available.
This happens because the gcc logic in libatomic/configure.tgt does not
recognize "uclinux" as a valid OS part of the target tuple, and
therefore it does not build libatomic.
The "uclinux" part of the tuple is used by Buildroot when
BR2_BINFMT_FLAT=y, so we make BR2_TOOLCHAIN_HAS_LIBATOMIC enabled only
if !BR2_BINFMT_FLAT.
It is worth mentioning that support for the uclinux tuple could most
likely very easily be added to gcc: it could rely on the generic
"posix" implementation of libatomic, which uses pthread locks,
available on all architectures where thread support is available.
Fixes:
[arm] http://autobuild.buildroot.net/results/3d8dc45e41a043d2c2c26bfb26c3617499fbe671
[m68k] http://autobuild.buildroot.net/results/318e01406e3e92eb589ee5b2231c671a4dbb6da4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependency after analysis of the gcc code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost-context module contains ARM assembly code, which uses ARM
instructions. Therefore, on Thumb-2 only platforms (such as Cortex-M),
the following build error occurs:
libs/context/src/asm/make_arm_aapcs_elf_gas.S: Assembler messages:
libs/context/src/asm/make_arm_aapcs_elf_gas.S:33: Error: unshifted register required -- `bic a1,a1,#15'
libs/context/src/asm/make_arm_aapcs_elf_gas.S:42: Error: immediate value out of range
To avoid this error, we make the boost-context module depend on
BR2_ARM_CPU_HAS_ARM.
Fixes:
http://autobuild.buildroot.net/results/8f6770b59a343b9f710e9363b43227ee9f026660
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use BR2_ARM_CPU_HAS_ARM instead of a dependency on
!BR2_ARM_CPU_ARMV7M.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Glessner <david.glessner@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this new version, the generation of atom-glue fails with the
following error:
Making all in src/lib
make[3]: Entering directory '/mnt/data/src/sfl/zodiac/buildroot/output/build/lldpd-0.9.4/src/lib'
GEN atom-glue.c
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
make[3]: *** [Makefile:899: atom-glue.c] Error 1
There is an upstream patch pushed after 0.9.4 which fixes the
corresponding Makefile.am, included in this commit.
Note that since the provided tarball ships the related Makefile.in file,
we need to tell Buildroot to autoreconfigure the package.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: add comment about AUTORECONF=YES in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a simple sysv init script to start the lldpd daemon at boot.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: cosmetic improvements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump libseccomp version to 2.3.1 to enable power architectures.
Signed-off-by: Judd Meinders <judd.meinders@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream i2c-tools executables are installed to /usr/sbin by default.
Make buildroot match this behavior.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before changing the install directory of i2c-tools to /usr/sbin/ make
sure busybox is built first (if selected) in order to ensure that the
symlinks to the busybox-provided versions are overwritten by the
i2c-tools' install commands.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has this patch a while and other projects are using
it already. So better switch to this.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of version 1.25.0 busybox by default includes a nearly complete
implementation of i2c-tools. Hide the upstream version unless the
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS option is selected.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng007 tag plus a
couple of fixes on top of it that will all make its way in the
next engineering build.
We hope this patch will cure most buildroot ARC failures as it
contains important fixes:
1) PIE fix. We have added PIE support to ARC toolchain at last.
So that should prevent breakage of many packages. As ARC now
supports PIE we remove ARC from BR2_TOOLCHAIN_SUPPORTS_PIE
exclusion in toolchain/Config.in file.
2) Assembler fix. This patch also have changes that fixes frequent
assembler failures, e.g.:
http://autobuild.buildroot.net/results/543/5430b902d900943a34c1888e7e410bd5df367bc2//
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: remove uClibc PIE patch, since we have bumped uClibc in the
mean time, to a version that contains the PIE fix for ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Security fixes and fixes for bugs introduced in 1.4.40.
Drop 0002-autobuild-clock_gettime-lrt-with-glibc-2.17.patch, which is now
upstream.
Due to the patch removal, autoreconf is no longer needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: remove autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many cleanups and ARC improvements including PIE support.
Patches included upstream and removed.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the wireless packages be selected by default to make the
usage of Wifi a bit simpler.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing the <bits/local_lim.h> issue by using <limits.h>, the
build still fail with udefined __WORDSIZE.
Adding <sys/user.h> to define __WORDSIZE reveal that xenomai use
<error.h> which is not provided by musl.
The discussion on the musl mailing list [1] about glibc error reporting
functions concluded to not add this support in the C library.
For now, disable Xenomai user space support for musl toolchains since
it require several patches to build correctly and needs to remove each
glibc error reporting functions.
Users interested in musl support for Xenomai can work with upstream to
fix these issues and revert this patch.
[1] http://www.openwall.com/lists/musl/2014/06/29/8
Fixes:
http://autobuild.buildroot.net/results/e36/e36a21c1df33bdd3fbc61d516a3e8f7c5f7c41af
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following include/asm-arm/features.h, Xenomai doesn't support cortex-M
cpus.
error "Could not find current ARM architecture"
Fixes:
http://autobuild.buildroot.net/results/06a/06a52b2c2c23df595f58feb6b95437fc65a86d31
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS to hold the
architectures than can build and use Xenomai on the target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need for the 'exit' statement in the post-image scripts,
so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide a more complete set of instructions on how to get Wifi
working on the warpboard.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
grub2 assumes the strip command will generate output and the output should
always be stripped - so, just use the $(TARGET_CROSS)strip to make sure that
the build succeeds regardless of the buildroot strip configuration.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iozone requires thread support since commit
06b53255cf, so having code to handle the
non-threaded case in the .mk file is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existent patch is not enough, as pthread_barrier_wait is used, which
isn't implemented in uClibc-ng Linuxthreads.
Remove the patch.
Fixes:
http://autobuild.buildroot.net/results/e5bbb80c81f4f170cf48d375e016e87a296ff754/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The autofs configure script verifies on the build system if /proc is
provided by a Linux system. This might fail if /proc is not mounted,
but does ont mean that procfs will not be available in the target.
Therefore, this commit adds a patch improving the AF_LINUX_PROCFS
autoconf macro to allow passing an autoconf cache variable. autofs.mk
then uses that to force the fact that /proc will be available on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to the tinycbor package that fixes the
installation process with old make version.
This fixes the build on autobuilders using an old make, where tinycbor
was creating empty directories instead of installing files.
Fixes:
http://autobuild.buildroot.net/results/7605c301f460398c2435f6b73d6d07c7d1022e8c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The readme.txt for the three boards are almost the same, so merge
them into board/zynq/readme.txt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. To sync with the Zedboard updates,
switch over to the Xilinx GitHub repository.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
Linux v4.4 in the mainline.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
