The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sqlite3 refuses to be built with -ffast-math (a side effect of -Ofast) when it
falls back to implementing its own isnan() function.
sqlite3.c: In function ‘sqlite3IsNaN’:
sqlite3.c:28554:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.
To work around this, when -Ofast is used replace with -O3.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we are about to remove the Blackfin architecture, remove the only
defconfig that was using this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation for the removal of the Blackfin architecture, drop the
autobuilder toolchain configuration that was testing Blackfin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes it is useful to pass some parameters to NetworkManager when it
starts (e.g. --log-level) instead of editting NetworkManager.conf. Allow
the user add a file with a NETWORKMANAGER_ARGS variable containing such
flags. This is simpler than overriding the whole startup script (e.g. by
means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove upstream patches:
* 0001-compat.h-introduce-compatibility-header.patch
* 0002-Fix-build-if-DOWNLOAD-is-set-but-no-JSON.patch
Update note about bundled modified version of mongoose 6.11.
Update licenses. Some files are LGPL-2.1+ now. Remove Public Domain as the
relevant bundled sqlite3 code was removed some time age.
Regenerated the .config file by doing:
```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the LICENSE file to license files.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Regenerate patches using git as patch 0002 didn't applu and the others
were fuzzy.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: fix authorship in patches, order of SoB and use git
format-patch -N to avoid numbering]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
valgrind works fine on aarch64, so allow selecting it on that
architecture.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In addition to the 'halt', 'poweroff', 'reboot' symlinks pointing to
systemctl, add 'shutdown'.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
The patch was applied to the zeromq master branch, see:
c971445025
Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build issues with MicroBlaze and PPC64 targets are fixed, and the
three patches are upstream.
Signed-off-by: Eugene Tarassov <eugene@largest.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixie WPS is a C based tool to audit networks against so called "Pixie
Dust" attacks.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- fix license, it's GPL-3.0+
- use PREFIX= instead of prefix= to actually have an effect, and
install in /usr and not /usr/local
- remove reference to PIXIEWPS_SUBDIR, which was never defined, and
was not needed anyway]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gallium R600 needs libelf when mesa is built with llvm support.
Because of this, toolchain must use either uClibc or glibc, as
musl is not currently compatible with elfutils.
This patch solves:
configure: error: r600 requires libelf when using llvm
Fixes:
http://autobuild.buildroot.org/results/8845ff0f28d3273ebe884126b85cd7c4a905d81b/
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The freescale p1025twr and t1040d4rdb defconfigs use a 4.15 series kernel;
specify BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15 accordingly.
This fixes the following build error:
Incorrect selection of kernel headers: expected 4.16.x, got 4.15.x
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
