Update the chromebook elm configuration to use v5.10 which is an LTS.
With v5.10, none of the patches previously needed to enable the display
are needed anymore. Deleting them and making minor updates to the linux
kernel configuration.
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2021-3565: A flaw was found in tpm2-tools in versions before
5.1.1 and before 4.3.2. tpm2_import used a fixed AES key for the inner
wrapper, potentially allowing a MITM attacker to unwrap the inner
portion and reveal the key being imported. The highest threat from
this vulnerability is to data confidentiality.
- LICENSE moved in doc directory since
23aa5dca66
and hash updated due to the following line added with
305011b2a7
Copyright 2019 Fraunhofer SIT sponsored by Infineon Technologies AG
- libuuid and wchar (for mbstate_t) are mandatory since version 4.2 and
eca77c1419https://github.com/tpm2-software/tpm2-tools/blob/4.3.2/doc/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Remove BR2_PACKAGE_PHP_EXT_JSON as the json extension is now an
integral part of PHP and is no longer optional. Due to this, it is
not added to Config.in.legacy.
- Move BR2_PACKAGE_PHP_EXT_XMLRPC to Config.in.legacy as the extension has
been removed. See https://wiki.php.net/rfc/unbundle_xmlprc for an
explination.
- Add a new patch that allows for opcache to cross-compile with PHP8.
- Explicitly disable opcache-jit when opcache is enabled, as the JIT fails
to cross-compile.
- --enable-maintainer-zts is now --enable-zts
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These patches are necessary for compiling against php8. These patches also
retain the ability to compile against PHP7.2
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch that allows php-geoip to compile against php8.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These patches are necessary for compiling against php8. These patches also
retain the ability to compile against PHP7.2 and should be removed during the
next version bump.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Remove both upstream patches
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Change --with-gnupg=$(STAGING_DIR)/usr/include to
--with-gnupg=$(STAGING_DIR)/usr as the make system appends /include to the
gnupgp path now.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When grub2 (i386-pc) is built with -O2 or -O3 it is unable to boot
and the system will reboot in a loop.
Tony Battersby has bisected [0] the error down to this security bugfix:
boot/grub2/0132-kern-parser-Fix-a-stack-buffer-overflow.patch
There is also a bug report by Peter Seiderer about this [1].
As discussed on the mailing list [2], this patch introduces a workaround
in the grub2.mk overriding the global optimization settings with -Os
which results in a booting system.
References:
[0] https://savannah.gnu.org/bugs/?60458
[1] https://bugs.busybox.net/show_bug.cgi?id=13586
[2] http://lists.busybox.net/pipermail/buildroot/2021-May/311524.html
Signed-off-by: Andreas Hilse <andreas.hilse@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop upstream patch.
Add another patch to fix build with musl.
Update COPYING hash because of date change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch URL to HTTPS address for git repository.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Along with version bump, update hash file to two space format and
switch to HTTPS URL.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Besides libFLAC, also build libFLAC++ when C++ support is enabled.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note, that the download URL has changed for the new release.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[yann.morin.1998@free.fr: move 'v' out of _VERSION]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Remove patches that now are upstream.
Upstream changes:
- Implement p10 thread controls
- Update p10 sbefifo chip-ops
- For p10 switch default backend to sbefifo
- Separate sbe api into new header libpdbg_sbe.h
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: drop "exit $?" in post-image.sh]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move 'rosetta' prefix from VERSION to SITE to have version be
in a standard format.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
fb-test-app suite provides a simple app to draw text on a given frame buffer.
Install it as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to last version of gcnano-binaries compatible with kernel
from StMicroelectronics version 5.10
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python2 contains a bundled copy of libffi which is currently out of sync with
the latest libffi release. There is an option to use a system libffi, buildroot
already uses it for the target python2 build and for python3. In python3, the
bundled copy doesn't exist anymore and the system-provided libffi is required.
The bundled copy currently fails to build on aarch64 host due to a missing
definition of AARCH64_CALL_CONTEXT_SIZE. This define was removed from the
headers in recent libffi releases and the host compiler might be including the
system headers before the bundled headers.
To solve this and since buildroot already relies on system libffi for target
python2 and python3 anyway, switch host python2 to use system libffi.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 3cf2782906 (support/testing/infra/emulator.py: update pre-built
kernels) bumped the default kernels used by the testing infra.
However, the newer armv7 kernel (at least) no longer has support for
lz4-compressed squashfs filesystems.
This breaks the squashfs test:
Filesystem uses "lz4" compression. This is not supported
List of all partitions:
1f00 131072 mtdblock0
(driver?)
1f01 32768 mtdblock1
(driver?)
b300 2048 mmcblk0
driver: mmcblk
No filesystem could mount root, tried:
squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,0)
Updating the kernel again is a little bit cumbersome, while fixing the
actual test is relatively trivial, so this is what we do: we switch
over to lzo, which is supported by the new kernel:
# zcat /proc/config.gz |grep SQUA
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
While at it, also drop the superfluous line disabling gzip compression:
it is part of a choice, so enabling one (lzo here) forcibly disables the
others (of which gzip).
Fixes: 3cf2782906
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Will avoid the following warning:
WARNING: Image format was not specified for
'/home/thomas/projets/outputs/TestExt3/images/rootfs.ext3' and
probing guessed raw. Automatically detecting the format is
dangerous for raw images, write operations on block 0 will be
restricted. Specify the 'raw' format explicitly to remove the
restrictions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All the tests that are using if=sd as a Qemu options are changed to
use infra.img_round_power2() instead of simply extending the size of
the image to the next MB boundary, which is not longer sufficient with
Qemu >= 5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop now-useless imports]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, SD card images must have a size that are a power of
two. While some filesystem (such as ext2/3/4) allow to specify the
expected size of the filesystem, others such as SquashFS do not have
this capability.
We were already extending the size of such images to the next 1 MB
boundary using "truncate -s %1M", but that is no longer sufficient. So
instead, we introduce a helper function that extends the size of an
image to the next power of two.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use f.trunctate() rather than subprocess.call([truncate,...])
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, the SD card size must be a power of two, so the
default size for ext2/3/4 filesystem images of 60 MB is not
suitable. Since 16 MB is used for the Ext4 test, let's use the same
value for the other tests as well (ext2, ext2r1, ext3). Without this
change, the ext2, ext2r1 and ext3 simply fail to run under Qemu >=
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The BRTest() class implements an assertRunOk() method that does the
very common work of running a command inside the emulator, and
checking that it is successful.
This commit changes all locations where this .assertRunOk() method can
be used, instead of open-coding the same logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04
requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot version in TestATFAllwinner. Updating U-Boot version to
2021.04 requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Note that Allwinner platform layer in TF-A does not provide support
for GCC stack protection, so make sure to disable this TF-A feature.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
