Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY
features in defconfig. However these features make sense only for
wpa_supplicant drivers supporting AP mode.
That is why, for consistent configuration, these features should
be explicitely disabled in wpa_supplicant .config file unless
they are requested by Config.in options.
Note that at the moment AP support in Buildroot can be enabled
only for NL80211 driver.
Fixes:
http://autobuild.buildroot.net/results/d37672374db935ac29953263ec68a2786ee65cc2/
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
New hostapd v2.9 supports WPA3 features such as OWE, SAE, DPP.
Those features are disabled by default in defconfig, so no
dependency from openssl is requried unless WPA3 support
is enabled.
This patch adds Config.in option for WPA3 support in hostapd.
When this option is selected, libopenssl is also selected and
WPA3 features including OWE, SAE, DPP are enabled in hostapd
.config file. When this option is deselected, then WPA3
options are disabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
New wpa_supplicant v2.9 enables by default WPA3 features in defconfig.
Meanwhile building those features requires openssl.
This patch adds Config.in option for WPA3 support in wpa_supplicant.
When this option is selected, libopenssl is also selected and WPA3
features OWE, SAE, DPP are enabled in wpa_supplicant .config file.
When this feature is deselected, then all the above WPA3 options
are disabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When switching to meson build system, enabling GLX support
require at least one DRI or Gallium dirver.
So add a dependency on BR2_PACKAGE_MESA3D_DRIVER for
BR2_PACKAGE_MESA3D_OPENGL_GLX option.
quoting the meson build system:
"dri based GLX requires at least one DRI driver." [1]
"Even when building just gallium drivers the user probably wants dri." [2]
[1] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n340
[2] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n266
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Bernd: moved x11 dependencies from glx condition to xorg7 condition to
fix build error with enabled egl without glx
BR2_PACKAGE_HAS_LIBGL needs to depend on BR2_PACKAGE_MESA3D_OPENGL_GLX]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: small changes to Config.in help text and menus]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The meson build system now check if dri swrast is enabled
when OSMesa classic is enabled.
See:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=cbbd5bb889a2c271a504c379f36a7cb717a85af4
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This option is renamed in order to match the naming used by the
meson buildsystem.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove '_NEW' from 'select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW' in
Config.in.
Wpa_supplicant dbus support option has been renamed from
BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW to BR2_PACKAGE_WPA_SUPPLICANT_DBUS
in the bump to v2.9 (f2ffdbee2a).
While connman package, which depends on wpa_supplicant, has not been
updated.
This patch will fix legacy build error.
Signed-off-by: Thuan Ho <sandwichdoge@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Joe changed the COPYING file from GPL-1.0 to GPL-2.0 in the development
leading up to 3.8:
d731f9b379/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes WARNINGs in make legal-info of the kind:
WARNING: kf5-extra-cmake-modules-5.47.0: cannot save license
(KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES not defined)
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The source files contain the "(at your option) any later version" text, so
change the licese to GPL-2.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The source files contain the "(at your option) any later version" text and
the website states:
License
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
http://0pointer.de/lennart/projects/ifplugd/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Which is the version used by docker 18.09.9:
0a3767c7e9
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes a number of post-18.09.7 bugfixes and to keep in sync with the
docker-engine version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security vulnerability:
CVE-2019-13509: Docker Engine in debug mode may sometimes add secrets to the
debug log. This applies to a scenario where docker stack deploy is run to
redeploy a stack that includes (non external) secrets. It potentially
applies to other API users of the stack API if they resend the secret.
And a number of other non-security issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patch used previously to support versions of ln lacking the '-r'
option generated broken links:
$ file target/usr/lib/cups/backend/driverless
target/usr/lib/cups/backend/driverless: broken symbolic link to ../../usr/lib/cups/driver/driverless
Add a squashing of two patches already applied upstream that provide a
better solution:
https://github.com/OpenPrinting/cups-filters/pull/154https://github.com/OpenPrinting/cups-filters/pull/157
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.
With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building protobuf with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.
Fixes:
http://autobuild.buildroot.net/results/73dc9610a13d6e14eec58d529617210d93d5dec4/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: fix variable name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fakeroot can be built to either use SYSV IPC or TCP for message passing.
A bug was discovered where Microsoft Windows 10 Services for Linux
doesn't include support for SYSV IPC MsgQ. This patch adds support to
detect this case and automatically build fakeroot to use the TCP
transport instead (It is assumed a TCP transport would definitely have
more overhead then MsgQs so the default wasn't changed to TCP).
Fixes
https://bugs.busybox.net/show_bug.cgi?id=11366
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jean-Francois Doyon <jfdoyon@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: use a post-patch hook and AUTORECONF=YES]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit 9135ab7a7c. This
version bump causes a major issue: the entire root filesystem of the
build machine is being copied into $(STAGING_DIR)/usr/lib/python2.7/,
causing the build to consume the entire disk space of the machine.
>>> python-sip 4.19.13 Installing to target
[...]
make[2]: Leaving directory `/home/test/buildroot/output/build/python-sip-4.19.13/siplib'
Traceback (most recent call last):
File "/home/test/buildroot/output/build/python-sip-4.19.13/mk_distinfo.py", line 108, in <module>
fn_f = open(fn, 'rb')
FileNotFoundError: [Errno 2] No such file or directory: '/home/test/buildroot/output/target/usr/lib/python3.7/site-packages/sip.pyi'
make[1]: *** [install_distinfo] Error 1
make[1]: *** Waiting for unfinished jobs....
cp: cannot open `/proc/fs/aufs/plink_maint' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_fifos' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_hardlinks' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_regular' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_symlinks' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/cad_pid' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/unprivileged_userns_apparmor_policy' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/usermodehelper/bset' for reading: Permission denied
...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using a newer host system cmake to build MariaDB, the following build
error occurs:
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mariadb no longer allows the WITH_SSL=OFF configure option. It will
instead search for openssl or gnutls headers, and if missing error out
with:
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find GnuTLS (missing: GNUTLS_LIBRARY GNUTLS_INCLUDE_DIR)
(Required is at least version "3.3.24")
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindGnuTLS.cmake:54 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
libmariadb/CMakeLists.txt:298 (FIND_PACKAGE)
Therefore, make host-mariadb depend on host-openssl, and tell mariadb
to use the system openssl.
This was not found by autobuilders because mariadb isn't built in the
autobuilders (it's part of a choice).
Note that the target mariadb already has an unconditional dependency
on openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Leave pam_selinux enabled by default in su.pam and remove it from the
/etc/pam.d/su and /etc/pam.d/su-l files if libselinux is not selected.
This cosmetic change prevents leaving a misleading commented-out line
that references a PAM module that does not exist.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>