It runs out of registers, it fails even in official form
(COMPILE_IN_THUMB_MODE=y) so just build it in ARM mode since EABI
mandates interworking.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, so build it in ARM mode, EABI mandates
interworking so this isn't an issue.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In early buildroot, it apparently was customary to have following style in
Config.in files:
bool"expat"
Nowadays, only two packages remain with this style: diffutils and expat.
This trivial patch lines them up with the style:
bool "expat"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch creates a config option for the ISC DHCP server to allow passing
--enable-delayed-ack to its configure script.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc picks the wrong interpreter for MIPS64/n64.
This patch fixes this problem by checking the selected
MIPS ABI instead of the MIPS variant.
The patch has been committed upstream:
http://git.uclibc.org/uClibc/commit/?id=603af30d6992e94ac30a66b953264076f4f2fd71
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These were required with ARC gcc 4.4.7; ARC gcc 4.8 has been changed
to behave the same as other architectures with -nostdlib, making this
option obsolete.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of over-writing the nsswitch.conf file (which may already contain
user's specific configuration if it comes from a custom skeleton), just
replace the 'hosts' line.
Remove now-useless custom nsswitch.conf file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In buildroot, the avahi socket is located in /var/run/avahi-daemon,
not in /usr/var/run/avahi-daemon/socket.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the move of uclibc to package/uclibc, the uclibc-menuconfig target now
depends on uclibc-configure, which brings in the build of
binutils/gcc-initial/mpfr/gmp, causing it to take ages with a clean tree.
Fix it by moving the basic .config mangling to the patch step, and depend
on that for menuconfig instead.
Notice that this is broken for _OVERRIDE_SRCDIR users, just like for
busybox, but as that is presumably a small subset of the buildroot
user base (and these advanced users can just run menuconfig in their
local uClibc tree), so this is considered the lesser evil of the two.
The proposed out-of-tree build series will also cause problems with
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds three patches to uClibc that are needed to make
Thumb2 support work properly:
uclibc-0006-arm-clone-restore-stack-pointer-just-after-return-fr.patch
uclibc-0007-arm-clone.S-Add-missing-IT-instruction-for-Thumb2.patch
uclibc-0008-arm-move-check-for-BX-to-its-own-header.patch
The first one is a necessary dependency of the second one. Both of
those patches have already been merged upstream, after 0.9.33.2. The
third one hasn't been merged upstream yet, but it has already been
submitted a while ago by Yann E. Morin, without receiving attention
from upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation to the addition of more patches that require a correct
ordering, rename uClibc 0.9.33.2 patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using eglibc, the ld-linux loader is installed as
ld-linux-armhf.so.3, but gcc 4.7.x was not yet updated, and generates
binaries that reference ld-linux.so.3. This was fixed starting with
gcc 4.8.x. In order to be able to use gcc 4.7, we create the
appropriate symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in gcc 4.6.x, so versions
earlier than this one should not be used when EABIhf is selected.
The ARM VFPv4 support was introduced in gcc 4.5.x, so versions earlier
than this one should not be used when VFPv4 is used.
[Peter: drop OABI dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in Binutils 2.22, so earlier
versions should not be selected when EABIhf is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces the support for the EABIhf ABI, next to the
existing support we have for EABI and OABI (even though OABI support
is deprecated). EABIhf allows to improve performance of floating point
workload by using floating point registers to transfer floating point
arguments when calling functions, instead of using integer registers
to do, as is done in the 'softfp' floating point model of EABI.
In addition to this, this commit introduces a list of options for the
floating point support:
* Software floating point
* VFP
* VFPv3
* VFPv3-D16
* VFPv4
* VFPv4-D16
and it introduces some logic to make sure the options are only visible
when it makes sense, depending on the ARM core being selected. This is
however made complicated by the fact that certain VFP capabilities are
mandatory on some cores, but optional on some other cores. The kconfig
logic tries to achieve the following goals:
* Hide options that are definitely not possible.
* Use safe default values (i.e for Cortex-A5 and A7, the presence of
the VFPv4 unit is optional, so we default on software floating
point on these cores)..
* Show the available possibilities, even if some of them are not
necessarily working on a particular core (again, for the Cortex-A5
and A7 cores, there is no way of knowing whether the particular
variant used by the user has VFPv4 or not, so we select software
floating point by default, but still show VFP/VFPv3/VFPv4 options).
It is worth noting that this commit doesn't add support for all
possible -mfpu= values on ARM. We haven't added support for fpa, fpe2,
fpe3, maverick (those four are only used on very old ARM cores), for
vfpv3-fp16, vfpv3-d16-fp16, vfpv3xd, vfpv3xd-fp16, neon-fp16,
vfpv4-sp-d16. They can be added quite easily if needed thanks to the
new organization of the Config.in options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the following to test:
/usr/share/qt/examples/opengl/hellogl_es2/hellogl_es2 -qws -display powervr
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Sundareson, Prabindh <prabu@ti.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Sinan Akpolat <sinan@linkas.com.tr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg-cairo provides the ability to render SVG content from files or
buffers. All rendering is performed using the cairo rendering library.
[Peter: license is LGPLv2.1+]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libosip2 appears to have support for the "ARC standard" (Advanced
RISC Computing), which is unrelated to Synopsys DesignWare ARC
processors. The check for this involves verifying the existence of
the "__arc__" macro. Unfortunately, this macro is also present
as a predefined built-in for the ARC processors, resulting into
build failures.
[Peter: add short comment in .mk files as well]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... since we now only support EABI for ARM, we only need to
force EABI unconditionally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... since we only support EABI now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When refactoring the internal toolchain backend logic, the code was
changed to pass the custom configure options given through
BR2_EXTRA_GCC_CONFIG_OPTIONS only for the gcc final pass, with the
idea that we're only interested by user customization for the final
compiler.
However, the beaglebone_defconfig was passing --with-float=hard
--with-fpu=vfpv3-d16 as BR2_EXTRA_GCC_CONFIG_OPTIONS, and since the
refactoring, it was causing build failures of the beaglebone_defconfig
(with messages saying that Busybox is built to use VFP arguments, but
libc/libm are not). This is due to the fact that the gcc intermediate,
which is used to build the C library, wasn't built to generate hard
float, while the final compiler was generating hard float.
So, we get back to the original situation where the options in
BR2_EXTRA_GCC_CONFIG_OPTIONS are passed to all of the compiler
passes. Of course, the specific case of hard float will be fixed by
following patches in this area, but the idea still remains: the three
gcc should have the same options, if those options affected the ABI of
the generated code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
nodejs needs the ARM blx instruction which is only supported in v5t+
cores (v5 ISA with thumb instructions).
Disable it for lower cores. Fixes:
http://autobuild.buildroot.net/results/89e/89ee5ba047a26a8c7a612d0285b08780b70efbd4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is GPLv2, fix license file, drop unneeded standard include]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also move smtpd.py removal to the global remove useless files define.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorder the external python modules menu entry so that it belongs under
python(2) and not under python3 to avoid confusion.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds a patch that adds the __kernel_long and __kernel_ulong types to
uClibc. This fixes the build failure with Linux 3.10 headers.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU Ocrad is an OCR (Optical Character Recognition) program
based on a feature extraction method.
It reads images in pbm (bitmap), pgm (greyscale) or ppm (color) formats
and produces text in byte (8-bit) or UTF-8 formats.
[Peter: fixup whitespace, install into STAGING_DIR, use make install, BR2_GNU_MIRROR]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gmp support has a hardcoded /usr/include include PATH which causes
breakage when there is a distribution gmp with development headers
installed. Fixes:
http://autobuild.buildroot.net/results/849/8497648c0b21390782eecc5b4aa91281bcf58ad6/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add uClibc upstream patch to support __kernel_long and __kernel_ulong
datatypes as used by kernel headers 3.10+
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... for a truck-load of memory-leak and other various fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package/efl/libevas/libevas-fix-xcb-backend-typo.patch patch is
removed, as it has been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All the EFL components are released simultaneously, with an identical
version number, just like all Qt5 components for example. So it makes
sense to have a single EFL_VERSION variable in package/efl/efl.mk that
is used by all the packages in package/efl/*/*.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for:
- sound volume
- GL deadlock
- ressources leak
- compressed audio streams
- audio sampling up to 192kHz
- display scaling
- cache flush for mailbox
Switch to using a 7-char cset, instead of the long one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by 'scanf' on IRC, the iptables now fails to build because
of a missing <asm/cache.h> header in the kernel headers. The package
directly uses $(LINUX_HEADERS_DIR), which is not correct: this is the
source directory of the kernel, not where they are installed, and in
addition, this directory is empty/does not exist when using external
toolchains.
Instead, we use $(STAGING_DIR)/usr, which contains the kernel headers,
as part of the toolchain headers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, a '+' sign was left at the beginning of a line in
eglibc.mk. Noticed by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The headers and kernels where changed to XZ format on commit
98b5cc3eb4, but the headers reverted back
to bz2 on the packaging of the toolchain.
This causes double kernel downloads when the versions match, so switch
back the headers to XZ.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lttng-tools doesn't require bison or flex, it contains pre-generated
versions of the lexer and parser, so it can build perfectly fine
without bison and flex. We have removed both of these tools from our
mandatory dependencies since a bit of time, the Free Electrons
autobuilders don't have them installed, and the build succeeds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a target 'eglibc' package. For now, there is no way
to build this package, the next commit will add the integration of
eglibc into the Buildroot toolchain backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the introduction of the eglibc library to the
internal toolchain backend, the options that allow to enable/disable C
library features such as largefile, IPv6, RPC and so on now belong to
the uClibc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to convert gcc to the package infrastructure, we need a way
of overriding the name of the make target used for the installation of
host packages, just like we have for target packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The kernel headers are part of the staging directory, so there is no
reason to point the Busybox CFLAGS directly to them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libtpl has moved from sourceforge to github, and there is no longer
a version-specific tarball available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new jimtcl package - a lightweight tclsh alternative.
Useful for a lighter footprint usb_modeswitch installation.
tclsh size is ~700kB for ARM compared to ~200kB for jimtcl.
[Peter: wrap help text, fix file header]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg provides a library for parsing SVG content in files or buffers.
Libsvg does not do any rendering, but instead provides a function-based
interface that can be used by various rendering engines.
[Peter: drop libxml2 conditional]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libevent test programs use fork(), function
that is not available on MMU-less architecture.
This patch prevents compiling libevent test programs
so that library can successfully build on architectures
like blackfin
Fixes:
http://autobuild.buildroot.org/results/2e0/2e0422f1042d0cb00f5bab0dc190930581ed4ef2/
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove lttng-tools-no-sync-file-range-in-uclibc.patch because it got
merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 0.8.0 version is at /projects/haserl/haserl/0.8.0, and 0.9.x versions
at /projects/haserl/haserl-devel/.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 2013c and switch to the FTP site since the HTTP one is
unfortunately serving .tar.gz files that are just plain tar files
(uncompressed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you use a custom target skeleton with no /var/lib directory,
then the symlink installation in dbus.mk will fail. This patch
fixes this issue by creating /var/lib before creating a symlink
there.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the python2 patches were left behind when doing the python3
package. This was because the python build system can now autodetect
what packages can be built in the system.
However, some of these patches are actually useful to reduce drastically
the size of the interpreter.
This patch ports the relevant patches to the python3 package, and adds a
new patch to remove the idle3 IDE as well from the interpreter.
Fixes#5696
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ijs-config (ghostscript) is looked up in /usr/bin, if you've got a host
that has ghostscript with development headers installed then the build
fails when trying to link to the host libijs.
Forcibly disable ghostscript support since we lack a package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The DIRECTFB_CONF_OPT variable was missspelled for disabling the X11
support.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libdvbsi++ is a C++ library for parsing DVB SI sections and providing
the output in C++ objects. It's usefull in any case you need prepared
and preselected DVB SI data from the raw stream.
[Peter: fix _LICENSE_FILES tag]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default USERCOMPILE variable uses -fPIE so we bring this back.
This also fixes linking problems for MIPS when non-PIC objects
are used to form a PIC one.
Fixes the following linking problem on MIPS:
connections.o: relocation R_MIPS_HI16 against `__gnu_local_gp'
can not be used when making a shared object; recompile with -fPIC
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch dropped since the polarssl external library option is now
upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop patch and instead pass LD= on the make cmdline]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correcting the indentation inside Config.in. Also adding the missed
license information.
Note: libmicrohttpd is partialy dual licensed, if you don't need or want
to use the HTTPS option you can choose between LPGLv2.1+ and the eCos
license (http://ecos.sourceware.org/license-overview.html).
If you use the HTTPS option you have to agree to the LGPLv2.1+!
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps the various LTTng components to their latest stable
version: 0.7.7 for liburcu, 1.1.1 for babeltrace, 2.1.3 for libust and
2.1.2 for lttng-modules.
For babeltrace, the patch
lttng-babeltrace-02-fix-build-old-compilers.patch has been removed
because it has been merged upstream as of version 1.1.1. This is also
the reason why the package no longer needs to be autoreconfigured.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Original patch for tinyhttpd disables pthread support from the code
but does not disable it from makefile.
This patch disables pthread support altogether
Fixes:
http://autobuild.buildroot.net/results/2e61a80fcbddd62c76e0406c34ab44d14a4b5c79
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gvfs can make optional use of libgcrypt so it needs to depend on
it if it is selected. It's also necessary to set the
ac_cv_path_LIBGCRYPT_CONFIG variable to a known value in order
to prevent the AM_PATH_LIBGCRYPT macro from searching the host
paths for the libgcrypt-config script.
Fixes the following build problem when libgcrypt is installed on the
host system but the package is not selected in buildroot:
gvfsbackendafpbrowse.c:31:20: fatal error: gcrypt.h: No such file or directory
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If docbook2pdf is present on the host, the documentation is built, no
matter all the --disable-doc*
But forcing ac_cv_prog_DOCBOOK2PDF to no tells configure that
docbook2pdf is absent, and thus the documentation is not built.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gst-omx enables OpenMAX based accelerated video decode.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
adds libvpx support to gst1-plugins-good
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the gstreamer version 1.x series to buildroot.
[Peter: strip trailing newlines in Config.in]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argp bundled dependency which is linked to the libwvutils.so
shared library, wasn't built with -fPIC.
MIPS will refuce to link a non-PIC library with a shared one.
We fix this problem by appending -fPIC to CFLAGS and build all the
shared objects with -fPIC.
[Peter: use +=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lxp.doc is a module that provides useful features for working with XML
formats in LOM format as used by the LuaExpat project from Kepler.
[Peter: use fixed git revision, github tarball, install -D]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libqmi is a glib-based library for talking to WWAN modems and devices which
speak the Qualcomm MSM Interface (QMI) protocol.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The blkid binary is not any longer installed when libblkid from
util-linux is selected. udev has a builtin blkid command though
and already detects all values that we are interested in. Change
the usbmount script to use the environment variables set by udev
instead of calling blkid directly.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since version 0.3.0, libconfig has been made optional
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A patch from Thomas Petazzoni has been upstreamed in sconeserver; bump version
and remove the patch from Buildroot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Dhcpcd is an RFC2131 compliant DHCP client.
[Peter: needs ipv6, fix whitespace/file header]
Signed-off-by: John Stile <john@stilen.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package adds base64 encode/decode functionality for Lua
[Peter: fix file header, use TARGET_CONFIGURE_OPTS, drop quotes around paths]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move to libraries, fix Config.in, install into STAGING_DIR]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixup iozone's build system to make it somewhat more flexible.
First make our own linux targets for non-AIO toolchains (uClibc) and
non-threading.
And second, just ditch forced largefile support and expect it from
CFLAGS.
Otherwise using the generic target caused issues like:
http://autobuild.buildroot.net/results/19f606f2978dc3c8039b1bccfcc562b4050083c7/
...which is fixed by this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also added:
- WEBP file format support
- License information
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix freetype-config's includedir and libdir since they're expanded from
configure values since bumping to version 2.4.12
Fixes:
http://autobuild.buildroot.net/results/1c7/1c70ce0ff350623cc38baf4b8b61c8a7a8586aba/
...and many others.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch-makefile.patch' because it was merged upstream.
This package contains a dispatcher (wrapper) that can be installed as Tcl
script or as binary without further dependency. If Tcl is selected and the
binary interpreter is installed (BR2_PACKAGE_TCL &&
!BR2_PACKAGE_TCL_SHLIB_ONLY) the dispatcher will be installed as Tcl script
otherwise as binary.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch_data-fix-parallel-install.patch' because it was merged
upstream.
Remove dependency on Tcl because the dispatcher script has been moved to
usb_modeswitch package.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And select/install jquery-ui since it's almost mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Older gcc versions (< 4.4) don't accept cpp as -Werror / -Wno-error
parameters.
Disable it since it's not yet a default with any version and we don't do
-Werror by default. Fixes:
http://autobuild.buildroot.net/results/977/9779215c4dfb68dc105f27097246a97851b1f6c2/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'strace-fix-arm-bad-syscall.patch'. This patch had been integrated
in v4.6 (commit: 9bc6340d2) and was later replaced with a generic solution
in v.7 (commit: 2ce12ed31c2).
Strace still cannot handle non-LFS environments, so a modified version of
strace-fix-disabled-largefile-syscalls.patch remains. The 64-bit syscalls
(sys_truncate64, etc.) are references in the sysent structure but the
functinon definitions are commented out becuase of the missing LFS support.
The workaround for the 'forced lfs mode' doesn't seem to be necessary anymore.
Build tested on arm w and w/o LFS support.
[Peter: arc still not supported]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pass --disable-strict to avoid having -Werror in CFLAGS.
Having -Werror in CFLAGS can lead to build problems depending
on the gcc version that is being used and it should not be used
in released code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream changed their distribution tarball site.
Thanks go to Andrew Scheller from bug #6308 for noticing and reporting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot uses a normal ARM compiler to build the AM33X CM3 firmware
(which runs on a Cortex-M3 processor), but Buildroot will have a
default -march value that doesn't necessarily match the one needed for
Cortex-M3, leading to build failures (gcc complains that the
-mcpu=cortex-m3 option being passed is not compatible with the
selected -march).
Fix this by explicitly indicating -march=armv7-m.
Fixes:
http://autobuild.buildroot.net/results/db1/db13623b1701bfe678c302e8f88c7473cb2345f9/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the libglib2 bump, gvfs must be updated. We don't bump to
the latest 1.17.1, because it requires libglib2 2.37, and we have only
libglib2 2.36.x at this point.
Fixes:
http://autobuild.buildroot.net/results/d02/d026f3e697d60a3730f89acab18515eb568c4d0e/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When libpcap detects that libnl3 is available, it hardcodes the fact
of using -I/usr/include/libnl3, which is completely wrong in
cross-compilation.
This commit fixes that, by removing this hardcoded include path, and
by passing an appropriate -I option from libpcap.mk.
The original issue has been reported upstream at
https://github.com/the-tcpdump-group/libpcap/issues/305.
Fixes:
http://autobuild.buildroot.net/results/b65/b6585bf2985a188e797e5a6b71a35c461421e3b4/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove bison-2.6-compat patch as it has been incorporated upstream.
Remove fix build issue with old gtk as gtk has been bumped to a newer
version.
Remove fix-build-with-gcc-4-6 as it has incorporated upstream.
Remove directfb patches due to depreciation
Remove pool patch as it is no longer required
Remove pthread_getattr_np as webkit no longer uses this function.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop DirectFB support from libgtk2
* bump libgtk2 to version 2.24.18
[Peter: fixup patch whitespace changes]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
