Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: use BUILD_SHARED, BUILD_STATIC and INSTALL_STATIC options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clang tools and libraries for the host and
libclang for the target.
host-clang is needed to build libclc, which is provided in a follow-up
patch.
We need libclang for the target because it is used by most of OpenCL
implementations.
A later patch in this series will enable Clover, the OpenCL
implementation part of Mesa3D, which requires libclang.
clang-tblgen must be copied to HOST_DIR as it is not installed by
default but is needed for cross-compilation:
http://lists.llvm.org/pipermail/cfe-dev/2015-June/043318.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- Add Config.in comment about BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- Minor reformatting/rewrapping of comments in .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A backport of the Python 3 subprocess module for use on Python 2.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A tiny library to facilitate visitor implementation in Python
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library to enable your code run as a daemon process on Unix-like
systems.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the same version as tcl package.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The email address of Philipp Claves bounces.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
The patch was applied to the zeromq master branch, see:
c971445025
Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixie WPS is a C based tool to audit networks against so called "Pixie
Dust" attacks.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- fix license, it's GPL-3.0+
- use PREFIX= instead of prefix= to actually have an effect, and
install in /usr and not /usr/local
- remove reference to PIXIEWPS_SUBDIR, which was never defined, and
was not needed anyway]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reaver is a tool to audit networks against brute WPS pins attacks.
We use the github.com/t6x fork at the moment because other
versions/repos of this project won't cross-compile, and this fork is
the only one regularly updated and maintained.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Eugene is project lead of Eclipse TCF project
Signed-off-by: Eugene Tarassov <eugene@largest.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package add support for imx-mkimage for iMX8M.
Currently the only hardware it's tested for.
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.
See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove double "only" noticed by Carlos
- fix typo packaged -> package noticed by Romain
- fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.
In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.
It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.
More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369
The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.
More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.
If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:
- llvm-config --shared mode outputs static (even if LLVM is built as
one shared library) which leads to link issues with libgallium.
- llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
-lLLVMPasses,etc instead of the single shared library containing
all LLVM components (-lLLVM-5.0)
Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.
Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.
As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.
Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.
The main options needed to cross-compile LLVM are the following ones:
LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- add dependency on thread and C++ and update the Config.in comment
accordingly.
- make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
so that it isn't disabled on architectures where LLVM is anyway not
supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A backport of the `yield from` semantic from Python 3.x to Python 2.7.
Can be useful for both host and target packages.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.
This target is used to support testing of the bootlin e5500 toolchain.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
i2pd (I2P Daemon) is a full-featured C++ implementation of I2P
client.
I2P (Invisible Internet Protocol) is a universal anonymous
network layer.
All communications over I2P are anonymous and end-to-end
encrypted, participants don't reveal their real IP addresses.
http://i2pd.website
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Add third patch to not install the license file in /usr/LICENSE and
the source code in /usr/src instead of using a post-install-target
hook to remove /usr/LICENSE and /usr/src. Indeed, we're not sure if
/usr/src contains only stuff installed by this package.
- Clarify the comment that explains why -DTHREADS_PTHREAD_ARG=OFF is
passed, especially because it's only needed for older versions of
CMake, and causes a warning with newer versions of CMake.
- Propagate architecture dependencies to the Config.in comment about
the exception_ptr requirement.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CD paranoia on top of libcdio
http://www.gnu.org/software/libcdio/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: use a normal config option instead of menuconfig, update DEVELOPERS]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Romain Naour, use
QUOTATOOL_INSTALL_TARGET_OPTS to avoid installing man pages, as it
fails due to a bug in the upstream package Makefile]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:
- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.
- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.
- There's no access to the SPI flash in these versions of
uboot/linux/dts.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
- rename to solidrun_clearfog_defconfig;
- specify kernel headers version (default is now 4.15);
- remove ext2 fs size override, the 4 extra MB are not needed;
- U-Boot needs dtc and openssl;
- add comments to defconfig;
- update .gitlab-ci.yml;
- mention in readme.txt that SFP support is missing;
- add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- remove LIBKRB5_VERSION_MAJOR
- minor tweaks to commit title and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well supported via open source
Etnaviv drivers)
* Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)
And as usual we have:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
Writing sdcard.img on SDcard creates two partitions:
* FAT32 with uImage and uboot.env
* EXT4 with root filesystem
We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.
[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
Add defconfig to DEVELOPERS and fixup board/synopsys entry,
Drop postimage script, rename env file in genimage.cfg and drop size
setting for rootfs partition,
Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add docker-proxy package to Buildroot. Needed by docker-engine at
runtime, and previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version. Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.
This board configuration provides an upstream kernel build which
has been verified to boot on target.
The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new entry for myself listing the TS-5500 board directory and
defconfig file.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python based multi-container orchestration for Docker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport of the functools module from Python 3.2.3 for use on 2.7 and PyPy.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Library to use the pseudo-tty of a docker container.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python library for the Docker Engine API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssl.match_hostname() function from Python 3.5.
This function IS available in python 2.7 since 2.7.9, but it doesn't support
matching on IP addresses which is needed for some use cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python bindings for the docker credentials store API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Daniel's address is bouncing and my touch on fbgrab is now the most
recent one.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package to create and handle json structures in Python,
with very easy and convenient API.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I would like to help maintaining the following defconfigs:
imx23evk_defconfig
imx6-sabreauto_defconfig
imx7dpico_defconfig
mx25pdk_defconfig
mx51evk_defconfig
mx53loco_defconfig
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are spacial RF calibration utilities for TI Wilink 18xx
modules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am leaving Xilinx so to avoid future bounces update my email address
to my personal email address.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Allwinner Mali openGL userspace driver r6p2.
Used combined with kernelspace Mali driver,
it gives possibility to use 3D openGL SoC acceleration.
It provides fbdev libraries and headers.
It is compatible with Linux >= 4.4 as sunxi-mali-driver-mainline.
[Peter: Move version logic to Config.in, ensure directories exists]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Free Electrons is being renamed to Bootlin. While the
@free-electrons.com e-mail addresses still work, it is not guaranteed
to be the case in the future. Hence, this patch updates the DEVELOPERS
file to use the @bootlin.com addresses for all Bootlin engineers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Perier is no longer at Free Electrons, and his e-mail address
@free-electrons.com no longer exists, especially with the rename to
Bootlin. Romain is no longer maintaining the amd-catalyst package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Flask-SQLAlchemy is a Flask microframework extension which adds support for
the SQLAlchemy SQL toolkit/ORM.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that
gives application developers the full power and flexibility of SQL.
It provides a full suite of well known enterprise-level persistence
patterns, designed for efficient and high-performing database access,
adapted into a simple and Pythonic domain language.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package provides Cargo, the Rust official package manager.
Cargo is written in Rust and uses Cargo as its build system. It also
depends on other Rust packages.
Normally, a previously installed version of Cargo would be used to:
1. Fetch the dependencies.
2. Build the new version of Cargo, using the available Rust compiler.
But the fetching step prevents offline builds. So instead two features
of Cargo are leveraged: vendoring [1] and local registry.
First, a tarball of the build dependencies generated using `cargo
vendor` is fetched along with Cargo source code.
Then, the build process is as follows:
1. The tarball of the build dependencies is uncompressed in a local
registry.
2. A snapshot of Cargo, provided by cargo-bin, builds the final
version of Cargo.
3. A configuration file telling Cargo how to cross-compile programs for
the target is generated and installed.
Currently, only the host variant is provided.
[1] https://github.com/alexcrichton/cargo-vendor
[Peter: use src.fedoraproject.org, fix comment]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides rustc, the compiler for the Rust programming
language, built from source.
Currently, only the host variant is built.
The Rust compiler uses LLVM as its backend: a copy of LLVM source code
is provided and CMake is used to build it. It is possible to use a
pre-built external copy. When LLVM/clang will be available in Buildroot,
it would be possible to benefit from this feature and thus decrease
build time.
LLVM is configured to generate code for x86, ARM, PowerPC and MIPS
architectures.
The Rust compiler uses Cargo as its build system and is written in Rust.
Therefore this package depends on cargo-bin and rust-bin.
The internal build process is as follows:
1. stage0 compiler, provided by rust-bin, is used to build stage1
compiler.
2. stage1 compiler builds the final Rust compiler (stage2 compiler)
and the standard library for the host architecture.
3. the standard library for the target architecture is built.
The target architecture to support is given by the GNU/LLVM target
triple. Rust supports some predefined targets [1]. As the build system
expects the triple to be in the form of <arch>-unknown-<system> and
Buildroot toolchain wrapper uses <arch>-buildroot-<system>, the package
Makefile uses $(RUST_TARGET_NAME) defined in the rustc package and uses
it instead of $(GNU_TARGET_NAME).
When compiling Rust code with this compiler, the generated program only
depends on the target C library, as it is statically linked to the Rust
standard library and any other code from Rust packages (a.k.a.
"crates").
If the jemalloc package is selected, support for this memory allocator
will be enabled in the target standard library.
The menuconfig entry for rustc is also updated to expose this provider.
[1] https://forge.rust-lang.org/platform-support.html
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package fetches a binary version of Cargo, suitable to
bootstrap the host variants of the Rust compiler and Cargo, the package
manager.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides a pre-built version of rustc, the compiler for the
Rust programming language, fetched from the upstream project.
A pre-built version of the standard library for the host as well as one
for the chosen target are also fetched and installed.
Only the host variant is provided to allow the user to cross-compile
Rust programs and run them on the target.
This package could also be used to provide a bootstrap compiler when building
Rust from source. So, in order to add it as a build dependency, the compiler and
standard libraries are only installed in $(HOST_DIR) if the package is
explicitly selected.
The menuconfig entry for rustc is also updated to expose this provider.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remi is a GUI library for Python applications which transpiles an
application's interface into HTML to be rendered in a web browser.
This removes platform-specific dependencies and lets you easily
develop cross-platform applications in Python!
https://github.com/dddomodossola/remi/tree/master
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
safec fork with all C11 Annex K functions
This library implements the secure C11 Annex K functions on
top of most libc implementations, which are missing from them.
https://rurban.github.io/safeclib/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lldpad package comes with utilities to manage an LLDP interface with
support for reading and configuring TLVs. TLVs and interfaces are individual
controlled allowing flexible configuration for TX only, RX only, or TX/RX
modes per TLV.
http://open-lldp.org/
Signed-off-by: Laurent Charpentier <laurent_pubs@yahoo.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The C++ REST SDK is a Microsoft project for cloud-based client-server
communication in native code using a modern asynchronous C++ API design.
This project aims to help C++ developers connect to and interact with
services.
This package is licensed under the MIT package and depends on BOOST
and OpenSSL/LibreSSL.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FlatBuffers is an efficient cross platform serialization
library for C++, C#, C, Go, Java, JavaScript, PHP, and
Python. It was originally created at Google for game
development and other performance-critical applications.
http://google.github.io/flatbuffers/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aoetools are programs for users of the ATA over Ethernet (AoE)
network storage protocol, a simple protocol for using storage over an
ethernet LAN.
Tested on Beaglebone Black.
Build tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- fix check-package warnings
- use SPDX license code, GPL-2.0
- use github helper
- pass TARGET_CONFIGURE_OPTS instead of just CC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Partially fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/47806089
And add myself to the list of devloppers for it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
zlib-ng, a fast Zlib replacement
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: drop host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Thomas: rename to tcf-agent, add missing dependency on BR2_USE_MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To support transparent (de)compression in iso9660, we need mkzftree,
which comes from zisofs_tools, biundled with cdrkit.
However, cdrkit is a cmake package, but zisofs_tools is an autotools
package, so we need a separate package just to get mkzftree, but it is
pretty lightweight.
We just need the host variant for now,so we just add that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add entry to DEVELOPERS file, rename to zisofs-tools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i2c-tools package has adopted the code of eeprog.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Additionally added myself to ffmpeg, rpi-firmware and rpi-userland as
changes to mpv may require updates or other changes to these packages
and vice-versa.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- propagate dependencies of selected packages in Config.in
- add missing Config.in comment about dependencies
- add missing upstream URL in Config.in
- add missing comment header in .mk file
- remove --disable-nls from configuration options, it is taken care
of by the package infrastructure
- remove --disable-dependency-tracking, it is taken care of in the
package infrastructure
- add $(TARGET_NLS_DEPENDENCIES) to <pkg>_DEPENDENCIES, since gconf
has optional NLS support
- add host-intltool to <pkg>_DEPENDENCIES, since gconf needs
intltool-update
- fix license: it's LGPL-2.0+, not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils provides the user-space utilities for the nilfs2
filesystem.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
