The gpu_mem option is not using the proper option argument which causes sed to
fail.
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.
Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This enables support for ARC cores in numpy.
Cherry-picked from
8edd610ffa
Hopefully becomes a part of the next major release (like 1.14).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is just a bug-fix release.
Removing 0003-BUG-Ensure-_npy_scaled_cexp-f-l-is-defined-when-need.patch
as it is a part of the release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At this point, libressl can be added to the openssl virtual package.
- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevent will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openldap will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opusfile will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mosquitto will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
softether tries to use SSLv3 functionality as a fallback. LibreSSL
doesn't support SSLv3 anymore. Two main issues prevent a patch:
- Trying to wrap the sslv3 functionality from the source with a guard
clause results in linking errors after compiling is done.
- There are multiple security vulnerabilities with using sslv3.
- There are multiple security issues in github pertaining to using
sslv3.
- This project seems to not be updated very often, and the security
issues are being ignored it seems.
For people who still want to use softether, they will have to use
libopenssl.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
heirloom-mailx has two small issues when compiling against LibreSSL:
- RAND_egd is used (LibreSSL does not support RAND_egd)
Solution: "Guard" the code calling RAND_egd
- SSLv3_client_method function is used (LibreSSL does not support SSLv3)
Solution: "Guard" the code with #ifndef OPENSSL_NO_SSL3
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages that use openssl are not compatible with libressl, only
with the real openssl (known as libopenssl in Buildroot). So before we
add libressl as a provider for the openssl virtual package, we
introduce a BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL hidden option that
packages incompatible with LibreSSL will be able to select.
This will allow packages that need OpenSSL to continue using "select",
without having to change to using "depends on" dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.
Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package. This offers a few advantages:
- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa83 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl has a bug in that <sched.h> defines CPU_ZERO(), which uses
memset(), but it doesn't have the prototype for it. This has been
fixed by upstream musl but until we rebuild our toolchains, let's have
a patch for Boost that works around this problem. We will of course
remove this patch once musl is updated to 1.1.17 and our toolchains
have been rebuilt.
Fixes:
http://autobuild.buildroot.net/results/6884cff634367cb640940051a60e5e13f30f70a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 95c15aaf15. It was
mistakenly pushed, and causes problems because it installs the shared
library to staging, but not to target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curl support is strongly recommended for multiplayer game.
The build system warn when curl is disabled:
cURL is required to load the server list
cURL is required to announce to the server list
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install libzstd to the staging directory.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default pppd built by buildroot writes the list of nameservers to
/etc/resolv.conf instead of /etc/ppp/resolv.conf
This is not the default behavior of pppd and breaks name resolution
if several network interfaces are used. The change makes this optional
and enabled by default, to be backward compatible and to add a possibility
to turn this behavior off, if required.
Signed-off-by: Maksim Salau <msalau@iotecha.com>
[Arnout: extend the help text to explain that it won't work on readonly
rootfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove patches that has been merged/updated upstream
0001-fix-building-shared-libs.patch:
CmakeLists packages are rewritten.
0002-add-support-for-tz-package:
dd93fd2b3d
0003-add-missing-define.patch:
656b3be02d
0004-ffmpeg30.patch:
b7b66968f9
Also add sha256sum for license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The coroutine2 functionality is now provided only through headers, the
compiled library has disappeared. Due to that passing "coroutine2" as
argument to --without-libraries. Hence, the
BR2_PACKAGE_BOOST_COROUTINE2 option is removed by this commit.
We don't need Config.in.legacy handling, because coroutine2 support is
now unconditionally available in boost.
While at it, add LICENSE_1_0.txt sha256sum to boost.hash.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop Config.in.legacy handling, reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a sha256sum for the license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes (many of them related to rendering, plus one
important fix for touch input) and many security fixes.
Release notes:
https://webkitgtk.org/2017/10/18/webkitgtk2.18.1-released.html
Fixes CVE-2017-7081, CVE-2017-7087, CVE-2017-7089, CVE-2017-7090,
CVE-2017-7091, CVE-2017-7092, CVE-2017-7093, CVE-2017-7094,
CVE-2017-7095, CVE-2017-7096, CVE-2017-7098, CVE-2017-7099,
CVE-2017-7100, CVE-2017-7102, CVE-2017-7104, CVE-2017-7107,
CVE-2017-7109, CVE-2017-7111, CVE-2017-7117, CVE-2017-7120,
CVE-2017-7142:
https://webkitgtk.org/security/WSA-2017-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: keep TARGET_CONFIGURE_OPTS in the environment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add sha256sums for license files.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
configure: WARNING: unable to find required header jpeglib.h
configure: WARNING: unable to find required library jpeg
configure: error: some required prerequisites were not found
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream has finally released an uploaded tarball, which is prefered
over cloning the repository from github.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
setools currently points the libsepol library directory to
$(STAGING_DIR)/lib/ when it should be $(STAGING_DIR)/usr/lib
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
