Until now, libaio contained some architecture specific code to do the
syscalls. In fact, it contained a generic variant of the code called
syscall-generic.h, but it was showing a warning when it was used, as
if it was "not safe". Consequently, in Buildroot, we had chosen to
support libaio only on a the subset of architectures that were
explicitly handled by libaio.
However, between 0.3.110 and 0.3.111, libaio upstream entirely dropped
the architecture-specific code:
https://pagure.io/libaio/c/97fd3fc0195500e616e34047cba4846164c411d9?branch=master
Consequently, in this patch, we:
- Bump libaio to 0.3.111.
- Switch to the new upstream at https://pagure.io/libaio/.
- Drop the 0001-arches.patch patch, which was adding support for
MIPS, since we no longer need architecture-specific code.
- Update the remaining patches, and Git-format one of them which
wasn't Git-formatted.
- Drop the BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS option and all its uses.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libblkid is a new optional dependency. Upstream "strongly discourages"
build without libblkid support. So enable libblkid unconditionally.
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lvm2 starting from version 2.02.178 depends on libaio library.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the now mandatory json-c depencecy. Propagate to reverse
dependencies.
Drop the no longer needed patch.
Add license files hashes.
[Peter: propagate _HAS_SYNC_4 dependency to comments as pointed out by
Thomas]
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The basic lvm2 package (libdevmapper / dmsetup) does build under musl, only the
standard (full) installation doesn't.
Many setups only need the basic package, so move the !musl dependencies down
to the sub options and adjust the reverse dependencies (cryptsetup/dmraid)
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: adjust Config.in comments and dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 66f136a9f6.
Issue fixed with uClibc-ng update to 1.0.24.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptsetup installs a library and a header file, so it makes sense to
install it to staging.
Fixes bug #9691.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit fixes all such reverse dependencies by removing dependency
on BR2_USE_WCHAR as it is not required by package itself.
Fixes: 006a328ad6 ("util-linux: fix build with ncurses")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The _gp link issue has been fixed in CS nios2 2015.11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptsetup does not actually depend on e2fsprogs, but on libuuid that is a
dependency of e2fsprogs. Remove the e2fsprogs dependency, and add a direct
dependency on util-linux (libuuid provider).
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add support for the alternative OpenSSL and Linux kernel crypto backends.
The latter does require that additional kernel modules (like algif_hash)
are present and loaded before invoking cryptsetup, so is used as last choice.
- Removes CRYPTSETUP_AUTORECONF as it is redundant, and reconf does
create a dependency on libgcrypt for the m4 macros used.
[Thomas: add an explicit --with-crypto_backend=gcrypt with the
libgcrypt backend is requested.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes autobuild error
http://autobuild.buildroot.net/results/cc1a65b9554bc2ece1b3ea8b51cd805b9bda7e86/
Adding libintl to the libraries list for cryptsetup when using a
uclibc toolchain and locale support is enabled.
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
