Bump up libgtk2 version
The version of libgtk2 currently used doesn't build when built against
DirectFB. The issue has been fixed in a later version of the 2.12.x
series, so let's upgrade to this version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
From: Grant Likely <grant.likely@secretlab.ca>
The Xilinx UART Lite and MPC5200 Programmable Serial Controller (PSC)
devices have dedicated major/minor numbers. Add them to the device
table data file so they get are present in the root filesystem
Add the DirectFB examples package.
This patch adds the DirectFB examples package to Buildroot. It is
largely based on a patch written by Daniel Laird, and available at
http://bugs.uclibc.org/view.php?id=4224. I only made a few adaptations
to get it to work properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
SaWMan is a new window manager module for use with DirectFB.
Its main difference to the default module is that it allows one process
to be an application and window manager,
implementing all kinds of diversity,
while SaWMan is only the working horse.
Daniel Laird
This patch will default to linux-generic32, unless a known optimized
architecture is selected.
As of today it will select optimized config for; avr32, ia64, powerpc and
x86_64.
This fixes bug #5344.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Use AutoTools.in to build freetype.
Slight issue with freetype installation to TARGET_DIR.
Doing an install results in far too many files being copied in.
So for now I do what the old makefile did which is copy the .so files
and links manually rather than using a make install.
It also uses the autotools.in additions to not use the generic libtool patch and
use a local one instead.
Daniel Laird
This patch bumps the version to 0.9.8 and refreshes the patch against that
version. Fixes bug #5284.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds the possibility to install the uClibc test suite to the target
file system. This is useful if you need to debug or test your uClibc.
The option is defaulted to no, and is not needed for a normal running Linux
system. The test suite is installed to /root/uClibc
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will use linux-generic32 for all i386 target architectures, which
fixes bug #5274.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Patch to build against newer kernel headers
( vsftpd-2.0.7-uclibc.patch , based on idea from
http://www.bitshrine.org/gpp/vsftpd-2.0.5-syscall2.patch )
-new basic init script (no config yet)
-Update version (2.0.7)
-openssl fixes
-cleanup makefile deps so it doesn't get built when things
don't change
-force some performance enhancing autoconf options
-run 'installscripts' so findsmb and smbtar are installed
-samba binaires were segfaulting with uclibc 0.9.29
when not using: samba_cv_fpie=no. Force it.
Config.in:
-create configure options for findsmb and smbtar
S91smb:
-create dir (/var/lock/subsys) that is referenced
later in script
-Allow user to specify custom ccache location.
This allows you to build a toolchain and put it on
an nfs share so other people can use the toolchain
without errors about the ccache dir missing.
-Force some autoconf options so that job control
is turned on.
(Otherwise these checks fail when cross compiling.
And when job control is disabled, bash can't be
the default shell)
This patch fixes bug report #5204. The Busybox config was not copied from the
correct place.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch modifies the rule for installing the shared libraries into the
project_foo/.../autotools-stamps directory. This will make the installation of
GCC shared libraries be multi-project safe.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
On very lite systems the /usr/lib directory might not exist before libstdc++ is
installed. This patch makes sure the directory exists.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch puts gettext and libintl before the avahi targets, thus making sure
they exist before avahi targets are built.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds a missing backslash on a line in the middle of the list of
XSERVER_XORG_SERVER_CONF_OPT.
Reported-by: Sebastian Matuschka <Sebastian.Matuschka@gcd-solutions.de>
This patch will run "make headers install_headers" instead of the old "make
headers install_dev". The latter requires a cross compiler available in uClibc
versions > 0.9.29, and the cross compiler is not available at the configuration
time of uClibc.
Spotted and fixed by Bernhard Fischer.
Tested-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Other packages might also support Linux-style out of tree builds
with the O=<dir> syntax (E.G. Busybox does). As make automatically
forwards command line variable definitions those packages get very
confused. Fix this by telling make to not do so
This patch install with install-strip to the target and uses the default for
installing to staging. Makes the makefile even more compact, and also more
correct with using install-strip to get proper stripping of the installed
library.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch corrects the commit r23467 and replaces uclibc with
xserver_xorg-server in LXDOOM_DEPENDENCIES.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
