Move the test script to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test cases for python packages are very similar among each other: run a
simple script in the target that minimally tests the package.
So create a new helper class named TestPythonPackageBase that holds all
the logic to run a script on the target.
TestPythonPackageBase adds in build time one or more sample scripts to
be run on the target. The test case for the python package must
explicitly list them in the "sample_scripts" property. The test case
then automatically logins to the target, checks the scripts are really
in the rootfs (it calls "md5sum" instead of "ls" or "test" in an attempt
to make the logfile more friendly, since someone analysing a failure can
easily check the expected script was executed) and then calls the python
interpreter passing the sample script as parameter.
An optional property "timeout" exists for the case the sample script
needs more time to run than the default timeout from the test infra
(currently 5 seconds).
A simple test case for a package that only supports Python 2 will look
like this:
|from tests.package.test_python import TestPythonPackageBase
|
|
|class TestPythonPy2<Package>(TestPythonPackageBase):
| __test__ = True
| config = TestPythonPackageBase.config + \
| """
| BR2_PACKAGE_PYTHON=y
| BR2_PACKAGE_PYTHON_<PACKAGE>=y
| """
| sample_scripts = ["tests/package/sample_python_<package>.py"]
| timeout = 15
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 118534fe54 (fs: use a common tarball as base for the other
filesystems), the filesystem creation is split in two steps, using an
intermediate tarball to carry the generic, common finalisations to the
per-filesystem finalisation and image creation.
However, this intermediate tarball causes an issue with capabilities:
they are entirely missing in the generated filesystems.
Capabilities are stored in the extended attribute security.capability,
which tar by default will not store/restore, unless explicitly told to,
e.g. with --xattrs-include='*', which we don't pass.
Now, passing this option when creating and extracting the intermediate
tarball, both done under fakeroot, will cause fakeroot to report an
invalid filetype for files with capabilities. mksquashfs would report
such unknown files as a warning, while mkfs.ext2 would fail (with a
similar error message), e.g.:
File [...]/usr/sbin/getcap has unrecognised filetype 0, ignoring
This is due to a poor interaction between tar and fakeroot; running as
root the exact same commands we run under fakeroot, works as expected.
Unfortunately, short of fixing fakeroot (which would first require
understanding the problem in there), we don't have much options.
The intermediate tarball was made to avoid redoing the same actions over
and over again for each filesystem to build. However, most of the time,
only one or two such filesystems would be enabled [0], and those actions
are usually pretty lightweight. So, using an intermediate tarball does
not provide a big optimisation.
The main reason to introduce the intermediate tarball, however, is that
it allows to postpone per-filesystem finalisations to be applied only
for the corresponding filesystem, not for all of them.
So, we get rid of the intermediate tarball, and simply move all of the
code to run under fakeroot to the per-filesystem fakeroot script.
Instead of extracting the intermediate tarball, we just rsync the
original target/ directory, and apply the filesystem finalisations on
that copy. The only thing still done in the rootfs-common step is to
generate the intermediate files (users file, devices file) that are used
in the fakeroot script.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11216
Note: an alternate solution would have been to keep the intermediate
tarball to keep most of the common finalisations, and move only the
permissions to each filesystem, but that was getting a bit more complex
and changed the ordering of permissions and post-fakeroot scripts. Once
we bite the bullet of having some common finalisation done in each
filesystem, it's easier to just move all of them.
[0] Most probsably, users would enable the real filesystem to put on
their device, plus the 'tar' filesystem, to be able to easily inspect
the content on their development machine.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit fixes the following flake8 warnings:
support/testing/tests/fs/test_f2fs.py:6:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:12:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:38:23: E225 missing whitespace around operator
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Resolves:
support/testing/tests/core/test_hardening.py:25:42: E231 missing whitespace after ','
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Catch the commonly used options of SSP, Relro, and fortify.
Using the package targets of busybox and lighttpd. This
can easily be expanded to a larger list.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test case uses a too old U-Boot version, which is affected by the
infamous libfdt header conflict issue. We update U-Boot and ATF to
what is used in the current version of
solidrun_macchiatobin_mainline_defconfig, for which the problem no
longer exists.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/107860312
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test case uses a too old U-Boot version, which is affected by the
infamous libfdt header conflict issue. Let's update to U-Boot 2017.11,
which is used by our current bananapi_m64_defconfig that was the
inspiration for this test case.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/107860310
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a minimal script to listen to a port and check using netstat.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: increase the delay after starting the Twisted server, as 5
seconds was not enough for Python 3.x configurations.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module and asserts a version
string for a fake package is generated.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module to use with twisted in
Python 2 and with asyncio in Python 3.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While integrating proxy support in builder.py, a log flush
was left in the code. This commit cleans/removes that code.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow builder.py to inherit the system proxy settings from
the env if they are present.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the run-time tests to build rust and rust-bin packages are run via Docker,
the $USER environment variable is not set, which makes cargo fail when
initializing the test project.
So add it to make cargo happy.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
More specifically, this branch has recently seen a fix that is needed
for ATF to build properly with recent gcc versions:
c96ec59f8b
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case currently fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This issue has been fixed upstream in commit
10c252c14b7f446c0b49ef1aafbd5d37804577dd, available since v1.3. So
while we bump, let's bump to the latest version of ATF, v1.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/64360659
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.
When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, some packages may register hooks to be run just before and
just after the generic tarball image is generated, because they need to
prepare the filesystem for read-only or read-write operation.
However, this means that, if any of the hooks or the image generation
fails, the target directory is left in a dangling, inconsistent state.
We fix that by doing a copy of target/, run the hooks on that copy,
generate the generic tarball image out of that, and get rid of the copy.
This way, we can guarantee consistency of the target directory, and we
can even ditch support for post-fs hooks (those that restore target/).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent systemd bump has broken DBus dameon and DBus applications can no
longer find the daemon. So we want to catch those kind of failures
early.
We also want to check that the system as a whole is stable: no unit
should be failed.
Finally, ensure that we can read the jounrnal, even when we are doing our
tricks on read-only systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently 'run-tests -l' is broken. It breaks 'make .gitlab-ci.yml' that
in turn breaks the job in GitLab.
TestRustBase is not a test case by itself, so it can't have a method
with the name starting with "test_" otherwise nose2 assumes it is a test
case.
Move the test_run method from the base class to the derived classes.
While at it, update .gitlab-ci.yml with the new test cases.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/52000035
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To test the support for the Rust language, the following tests are added:
- building Rust compiler and Cargo from source.
- installing a pre-built Rust compiler and building Cargo from source.
For each test, a Rust test program is built and installed in the root file
system of a ARM vexpress QEMU system. The test is declared OK if the program can
be run properly from the test system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E122 continuation line missing indentation or outdented
E302 expected 2 blank lines, found 1
F401 'os' imported but unused
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, only post-build and post-image scripts were tested, each with
their own test-script.
The two test-scripts only differ in the name of the log file they
create, and it is based on the name of the script, so it is easy to
share the script.
This allows us to easily re-use it for testing post-fakeroot scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It needs mkzftree from zisofs-tools, so we add a dependency to it, and
we call that one explicitly (to avoid using the one from the host in
PATH).
It also needs the the uncompressed kernel image, but because it is
already in target/ so it gets compressed by mkzftree. We have two
options:
- compress everything but the kernel image,
- compress everything, kernel included, and recopy it later.
We choose the latter, because it is the simplest solution. So, we always
define the kernel-copy hook, but only register it when needed.
Finally, it needs a kernel with support for transparent
(de)compression, so we update the existing test config.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: really set the transparent compression option, take into
account the renaming of the option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Marvell U-Boot needs DTC to build, so the test case fails to build
on systems where dtc isn't available. We add
BR2_TARGET_UBOOT_NEEDS_DTC=y to make sure that we build our own DTC.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/44126707
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These new tests only do build tests, but allow to quickly verify that
the ATF/U-Boot combinations for vexpress, Allwinner and Marvell
platforms all continue to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa83 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the download directory, when specified with the -d option, is
only used to store the files downloaded by the testing infra, not those
downloaded by Buildroot.
So, we end up with this situation:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(TOP_DIR)/dl
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(BR2_DL_DIR)
This is not very consistent.
We change the behaviour so that the value of -d always takes precedence,
and is used by Buildroot as well, giving this new behaviour:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the remaining code style warnings from flake8:
- properly indent continuation lines;
- use proper code to test a parameter is not None.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
grub is no longer maintained: it is stuck at version 0.97 with huge
patches that have no opportunity to be applied upstream, as upstream
has even renamed it grub-legacy.
Besides, it no longer builds correctly with recent binutils versions,
and even the huge patches we could grab from Debian do not help the
slightest.
Since upstream really considers it dead, and there are at least two
alternatives (grub2 and syslinux), just remove grub.
Add a legacy entry.
Remove the test cases as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When we list the available tests, we use test_dir, which is set from
the path of the script. However, when we run the tests, we use the
hard-coded path.
Ditto to find the config file.
For consistency, always use test_dir.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We add the 3 following combinations:
- basic systemd, read-only, network w/ ifupdown
- basic systemd, read-only, network w/ networkd
- full systemd, read-only, network w/ networkd
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "builtin" kernel does not boot a systemd-based system, so
we resort to building the same one as currently used by our
qemu_arm_vexpress_defconfig.
We test the 8 following combinations:
- busybox, read-only, without network
- busybox, read-only, with network
- busybox, read-write, without network
- busybox, read-write, with network
- basic systemd, read-write, network w/ ifupdown
- basic systemd, read-write, network w/ networkd
- full systemd, read-write, network w/ networkd
- no init system, read-only, without network
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout in [1].
While at it, simplify the logic by always appending the BR2_JLEVEL and
defaulting to 0 (the value copied from Config.in is used for 5 years now
and is very unlikely to change).
[1] http://patchwork.ozlabs.org/patch/790525/
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig is composed on-the-fly by test infra + tests.
Dump it to the logfile before running 'make olddefconfig' so it can
easily analysed when debugging.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on Python implementation used for testing, time it takes to
perform a given test can vary pretty significantly. To accout for that
allow individual test functions to specify different timeout value.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be able to leverage the same test code for testing
different python interpreters (or wrappers around CPython) allow child
classes of TestPythonBase to override the name of the executable used
to run tests.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Python3 version of TestPython2 to make sure both versions of
Python get unit-tested.
Modify the code of libc_time_test() to support that change (convert
the code to use Python3-style "print").
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert TestPythonBase to a true base class that only provides code
implementing various tests without defining tests themselves in a
"discoverable" form.
To retain correct testing functionality, add TestPython2 derived class
that uses code from TestPythonBase to define actual runnable test.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: fix typo in commit log, update .gitlab-ci.yml, both pointed
by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some commands take more than 5 seconds to complete under QEMU, so add
provisions to allow individual unit-test to specify different duration
to avoid false negative test failures.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current test fails because of a legacy option, renamed during the
recent ext overhaul.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tools are now installed in host/bin instead of host/usr/bin.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These tests simply build a system with musl and uclibc toolchains, and
boot them under qemu. It allows to minimally validate that our support
for musl/uclibc external toolchains is working. We already had some
tests covering glibc toolchains, so we can now easily test that all
three C libraries are supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit is part of the series, as I've written/used those tests to
validate that things are still working correctly with all of glibc,
uclibc and musl toolchains.
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to pass -t to set the number of testcases to run
simultaneously.
When -j is not specified, calculate it to split the available cores
between the simultaneous testcases.
Example of auto calculated -j for cpu_count 8:
-t -j total
1 9 9
2 4 8
3 3 9
4 2 8
>=5 1 t
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to override the default BR2_JLEVEL used for each testcase.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove unused import.
Use 2 empty lines before a class.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
expect() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
sendline() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'lines' variable is overwritten with its own fields. Thus it
contains a line first, and then a list of fields -- it never contains
'lines'.
Use two different variables named 'line' and 'fields' to make the code
more readable.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We only have a positive test for it, in ext4. Let's have a negative
one as well.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently call infra.smart_open() to open log files each time we
need to write to them.
Opening the file once in the constructor of Builder and Emulator and
writing to it whenever needed is simpler and slightly more efficient.
Remove smart_open and instead create a new open_log_file() function
which just opens the logfile. Also let it compute the filename, in
order to simplify even further the Builder and Emulator code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is what the manpages usually do, and what Python does with the
automatically-added -h/--help parameter:
Before the change:
$ ./support/testing/run-tests
[...]
optional arguments:
-h, --help show this help message and exit
--list, -l list of available test cases
--all, -a execute all test cases
After the change:
$ ./support/testing/run-tests
[...]
optional arguments:
-h, --help show this help message and exit
-l, --list list of available test cases
-a, --all execute all test cases
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
has_broken_links makes it self-explanatory that this is a predicate
function, and that the return value tells whether there _are_ broken
links, not the opposite.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently messages from run-tests are quite unpleasant:
[br-tests/TestPostScripts/2017-05-09 15:51:57] Building
[br-tests/TestPostScripts/2017-05-09 15:52:23] Building done
[br-tests/TestPostScripts/2017-05-09 15:52:23] Cleaning up
.[br-tests/TestNoTimezone/2017-05-09 15:52:23] Starting
[br-tests/TestNoTimezone/2017-05-09 15:52:23] Building
[br-tests/TestNoTimezone/2017-05-09 15:53:17] Building done
[br-tests/TestNoTimezone/2017-05-09 15:53:22] Cleaning up
.[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Starting
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Building
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:33] Building done
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:37] Cleaning up
[...]
Change them in a more readable way by removing the date and using a
columnar style:
15:12:22 TestPostScripts Starting
15:12:25 TestPostScripts Building
15:12:48 TestPostScripts Building done
15:12:48 TestPostScripts Cleaning up
.15:12:48 TestNoTimezone Starting
15:12:54 TestNoTimezone Building
15:13:44 TestNoTimezone Building done
15:13:49 TestNoTimezone Cleaning up
.15:13:49 TestGlibcNonDefaultLimitedTimezone Starting
15:14:00 TestGlibcNonDefaultLimitedTimezone Building
15:14:56 TestGlibcNonDefaultLimitedTimezone Building done
15:15:01 TestGlibcNonDefaultLimitedTimezone Cleaning up
[...]
Note the '.' and other characters presented by nose2 are still
printed. They are not affected by this change.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an initial toolchain test case, testing the ARM
CodeSourcery toolchain, just checking that the proper sysroot is used,
and that a minimal Linux system boots fine under Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds some basic tests for two Buildroot packages: python and
dropbear. These tests are by no mean meant to be exhaustive, but mainly
to serve as initial examples for other tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a number of test cases for various filesystem formats:
ext2/3/4, iso9660, jffs2, squashfs, ubi/ubifs and yaffs2. All of them
except yaffs2 are runtime tested. The iso9660 set of test cases is
particularly rich, testing the proper operation of the iso9660 support
with all of grub, grub2 and isolinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a few Buildroot "core" tests, testing functionalities
such as:
- post-build and post-image scripts
- root filesystem overlays
- timezone support
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the core of a new testing infrastructure that allows to
perform runtime testing of Buildroot generated systems. This
infrastructure uses the Python unittest logic as its foundation.
This core infrastructure commit includes the following aspects:
- A base test class, called BRTest, defined in
support/testing/infra/basetest.py. This base test class inherited
from the Python provided unittest.TestCase, and must be subclassed by
all Buildroot test cases.
Its main purpose is to provide the Python unittest setUp() and
tearDown() methods. In our case, setUp() takes care of building the
Buildroot system described in the test case, and instantiate the
Emulator object in case runtime testing is needed. The tearDown()
method simply cleans things up (stop the emulator, remove the output
directory).
- A Builder class, defined in support/testing/infra/builder.py, simply
responsible for building the Buildroot system in each test case.
- An Emulator class, defined in support/testing/infra/emulator.py,
responsible for running the generated system under Qemu, allowing
each test case to run arbitrary commands inside the emulated system.
- A run-tests script, which is the entry point to start the tests.
Even though I wrote the original version of this small infrastructure, a
huge amount of rework and improvement has been done by Maxime
Hadjinlian, and squashed into this patch. So many thanks to Maxime for
cleaning up and improving my Python code!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
