To compile with Vivante header and use framebuffer, it is necessary to
pass option -DEGL_API_FB. This option is declared in pkg-config file of
Vivante library. But many packages (especialy qt5 components) does not
consider these flags.
So instead of patching every packages that use EGL, it is more
convenient to patch Vivante headers.
This commit add #define EGL_API_FB on top of eglvivante.h when
necessary.
[Thomas: fix syntax error.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thus, it is possible to force compilation of Gallium/DRI support in
mesa3d even if no Gallium/DRI drivers are selected. This is intended to
be used by external OpenGL provider (especialy further imx6 support).
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1.1.6, the mips softfloat toolchains are merged into the mips
toolchain using multilib. Our external toolchain infrastructure copies
the correct version to the target depending on the BR2_SOFT_FLOAT
option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hashes for all musl toolchains, including the ones that we
currently don't support (arm hf, sh4, x86_64-x32).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It always uses its own copy of pyexpat, but we can at least make it use
buildroot's expat.so.
[Peter: select expat]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For Linaro toolchains, a special post install staging hook is used to
create two symlinks needed for the dynamic loader to find the
libraries. However, the way the link is created prevents a 'make
toolchain-external-reinstall' from succeeding, because the symlink
already exists and points to a directory:
ln -sf . /home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf
ln: '/home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf/.': cannot overwrite directory
This commit adjust the hook to pass the '-n' option so that the link
name is treated as a normal file if it is a symbolic link to a
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump sane-backends to a "modern" 1.0.24 version.
Tweak the patches to avoid autoreconf (it doesn't seem to be happy for
me in gentoo).
Disable cups support (checks are wrong and it's no longer required).
Disable systemd support (checks are wrong and we never accounted for
this).
Should fix wine failure (i was unable to build sane-backends before):
http://autobuild.buildroot.net/results/d01/d01a3c7786df8cfd962a27f39283851db45c6165/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script doesn't detect ncursesw at all hence breaks the
build. Backport a patch from upstream for this. Fixes:
http://autobuild.buildroot.net/results/426/42669ca3b7215765a59a85c53ed724cbff79384e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I removed that in fac3042cc5 because the
ICU part was no longer required.
However the LDLIBS part is for static builds and should have been a
separate patch to avoid confusion. Fixes:
http://autobuild.buildroot.net/results/a90/a9092d01a71e2d799e5b7b3afb9fd3e304370d0c/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uClibc toolchain does not provide an appropriate uClibc
configuration for Buildroot: missing IPv6, missing nsl stub, missing
program invocation, etc. Therefore, we mark it as broken, waiting for
a new upstream release of a new toolchain.
We keep around the toolchain-external Synopsys code anyway, since it
will most likely be identical for the new toolchain version. However,
we remove all the quirks that were introduced to start work around
issues related to this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to C standards isprint argument shall be representable as an
unsigned char or be equal to EOF, otherwise the behaviour is undefined.
Passing arbitrary ints leads to segfault in nm program from elfutils.
Restrict isprint argument range to values representable by unsigned char.
Note: a similar change was done to the internal argp implementation of
glibc in commit
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=9055724a92433ffa4c36f93d918ee1b3dfa1d6f7.
[Thomas: add a reference to the corresponding glibc fix.]
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git:// protocol may not go through conservative corporate firewalls.
Use http, that goes out through about anything.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This brings the raspberrypi_dt_defconfig up to the same kernel used by
the raspberrypi2_defconfig. Also changed the git URL to use HTTP for
consistency.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch
back to the 3.18 branch. This provides a couple of advantages:
1. mmc0 works again. Floris Bos found out that this was due to using
the precompiled DTB files from rpi-firmware. These DTBs were built
using 3.18.
2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y
according to popcornmix. See
https://github.com/raspberrypi/linux/issues/915.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix missing header <sys/types.h> for u_char in bspatch.c.
Fixes http://autobuild.buildroot.net/results/31a/31a837cf6e34b02dce498f2b12e40d6d16a5a8e6/
Patch not sent upstream - no maintainer mail address or repository found.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the stock lighttpd configuration was patched to run as user root,
because we do not have a lighttpd user.
Patch it to use www-data instead, which is a user available in the default
skeleton, and is the same other webserver packages (like nginx) use.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clamav uses AC_TRY_RUN in m4/reorganization/code_checks/ipv6.m4 to check
for ipv6 support, which is not cross-compile safe. Since buildroot
supports ipv6 out-of-the-box now this patch forces ipv6 support.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop LIBTOOL/GETTEXTIZE as well since it's no longer bundled with a beta
version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch SITE to use BR2_KERNEL_MIRROR as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2013-3153 - sensitive HTTP server headers also sent to proxies.
And drop upstream patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security patch now upstream so drop it.
Also switch to bz2 compression.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6b1f66643d.
It turns out to not really fix the build errors after all, so revert it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, libwebsockets.mk is passing -DWITHOUT_TESTAPPS=ON to disable
the building of libwebsockets test applications, but this is doing nothing
because the option is really named LWS_WITHOUT_TESTAPPS.
This commit fixes that by using the correct option name.
Signed-off-by: Baptiste Moraine <baptiste.moraine@kapelse.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If QT_COORD_TYPE_DOUBLE is forced and hard float is used, Qt compilation
breaks because it can't find hard coded operations on double.
Moreover, QT_COORD_TYPE is float only if QT_NO_FPU is set.
(cf src/corelib/global/qglobal.h)
So, we can safely make the QT_COORD_TYPE_DOUBLE option depend on
BR2_SOFT_FLOAT.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All patches are simply refreshed, except
002-properly-detect-if-python-build.patch which is removed because an
identical fix has been merged upstream:
e128ea78e5
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
