Parallel 'make install' seems to deadlock here (make 3.81). Work around it
by disabling parallel make for the install step.
We only disable parallel make for the install step, as the build step works
with parallel make, and webkit is a huge package, so build time goes up
significantly with make -j1.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also apply the following patches:
- upstream fix for 32-bit autotools
- upstream fix for conditional gstreamer build of gtklauncher
- upstream fix for detecting the latest harfbuzz
- Update existing patch for disabling docs
- Update existing patch for execinfo_h
- upstream patch for the MIPS DFG support. This fixes
compilation problems on MIPS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also cleaned the package makefile up by removing explicitly naming
the source along with moving the configure of the package down below
the standard package declarations.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Lua website says:
"Like most names, it should be written in lower case with an initial capital,
that is, "Lua". Please do not write it as "LUA", which is both ugly and
confusing, because then it becomes an acronym with different meanings for
different people."
http://www.lua.org/about.html
So, let's honor this request in buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, $(PKG)_PATCH allow only to download patches from same URL than tarball.
This patch allow to detect when plain URL are used in $(PKG)_PATCH and correctly
handle them.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If xzcat is not present on the host system, buildroot bails out early asking
the developer to install it (xzcat is now a DL_TOOLS_DEPENDENCY)
Conversely, when BR2_TARGET_ROOTFS_CPIO_XZ is enabled, then host-xz is a
build dependency, and no manual action is required from the developer.
Because the second approach is nicer, also build host-xz when xzcat is not
available, using the host-prerequisite and suitable-host-pkg mechanisms,
already used for tar.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream has a large number of patches lined up for the next 0.9.33.x bugfix
release;
http://git.uclibc.org/uClibc/log/?h=0.9.33
Add them here, as atleast some of them are quite critical (E.G. the eventfd
issue gets triggered by recent glib versions).
I've skipped the microblaze and xtensa fixes as we don't currently support
those with 0.9.33.2.
Drop uclibc-0002-Add-definition-of-MSG_WAITFORONE-and-MSG_CMSG_CMSG_CLOEXE.patch
as that is a subset of uclibc-0035-socket.h-pull-socket_type.h-from-eglibc.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, all target options lie in the top-level menu.
This looks a bit clumsy, since all other options are neatly
folded into their own sematic sub-menus each.
Move the target option into their own sub-menu too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a slew of USB-related and other fixes.
The bcmrpi defconfig is a huge beast with lots of superfluous drivers.
The brcmrpi_quick defconfig is a stripped down minimalist defconfig with
all that is needed to bring up a RPi with complete HW support, and
nothing superfluous, which is what we need for a board's defconfig in
buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes and improvements for USB, audio sync, camera support,
codecs, HDMI framerate and audio, and GPU freezes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the past there may have been a very good reason to refer to 'buildroot2', but
these days it's just odd.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Brings a number of fixes, and most importantly no longer tries to figure
out if the tree contains uncommitted changes when using svn, as that can
be very slow.
This only syncs with setlocalversion as of 2.6.34 as later kernel versions
aren't directly compatible with our use cases since 09155120c (kbuild:
Clean up and speed up the localversion logic).
We still have one delta from the kernel version (setlocalversion: fix i18n
issue with svn), as that has only later been fixed in the kernel version.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So we don't end up pulling in host-busybox (which doesn't exist) if
KMOD_TOOLS is enabled.
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And deprecate 3.9.x series to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Looks like this was lost in 20d4792e.
[Peter: use _INSTALL_INIT_SYSV, explicitly delete script on uninstall]
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PCRE C++ unit tests fails to build properly for static scenarios since
it's not taken account for properly in the build system.
Just disable them, they're never installed to the target.
Fixes:
http://autobuild.buildroot.net/results/970/97027b981659502ff12c345c3caef4933cddb354/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When libgcrypt support is enabled the configure script will try to
find libgcrypt-config in the PATH. If the host distribution has it then
brokeness ensues. Fixes:
http://autobuild.buildroot.net/results/eca/eca10b8360354e7e51406f7ac942d343987bde5e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpthread.so has a special stripping condition to preserve parts of
it that are needed for debugging. However, due to the usage of 'xargs'
instead of 'xargs -r', the strip command is executed regardless of
whether a libpthread.so file is found or not. This leads to a big
error message being displayed in static-only builds, because strip is
executed without a file argument. Thanks to the '|| true', the build
continues, but still shows a big error message in the middle, which is
not nice.
By using 'xargs -r', we avoid the strip command from being executed
when 'find' doesn't find any match. We also remove the '|| true' to
catch other real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
