Python library for the Docker Engine API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssl.match_hostname() function from Python 3.5.
This function IS available in python 2.7 since 2.7.9, but it doesn't support
matching on IP addresses which is needed for some use cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python bindings for the docker credentials store API.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OSS implementation of the TCG TPM2 Software Stack (TSS2). This stack
consists of the following layers from top to bottom:
* System API (SAPI) as described in the system level API and TPM command
transmission interface specification. This API is a 1-to-1 mapping of
the TPM2 commands documented in Part 3 of the TPM2 specification.
Additionally there are asynchronous versions of each command. These
asynchronous variants may be useful for integration into event-driven
programming environments. Both the synchronous and asynchronous API
are exposed through a single library: libsapi.
* TPM Command Transmission Interface (TCTI) that is described in the
same specification. This API provides a standard interface to transmit
/ receive TPM command / response buffers. It is expected that any
number of libraries implementing the TCTI API will be implemented as a
way to abstract various platform specific IPC mechanisms. Currently
this repository provides two TCTI implementations: libtcti-device and
libtcti-socket. The prior should be used for direct access to the TPM
through the Linux kernel driver. The later implements the protocol
exposed by the Microsoft software TPM2 simulator.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package to create and handle json structures in Python,
with very easy and convenient API.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are spacial RF calibration utilities for TI Wilink 18xx
modules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Allwinner Mali openGL userspace driver r6p2.
Used combined with kernelspace Mali driver,
it gives possibility to use 3D openGL SoC acceleration.
It provides fbdev libraries and headers.
It is compatible with Linux >= 4.4 as sunxi-mali-driver-mainline.
[Peter: Move version logic to Config.in, ensure directories exists]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Flask-SQLAlchemy is a Flask microframework extension which adds support for
the SQLAlchemy SQL toolkit/ORM.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that
gives application developers the full power and flexibility of SQL.
It provides a full suite of well known enterprise-level persistence
patterns, designed for efficient and high-performing database access,
adapted into a simple and Pythonic domain language.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remi is a GUI library for Python applications which transpiles an
application's interface into HTML to be rendered in a web browser.
This removes platform-specific dependencies and lets you easily
develop cross-platform applications in Python!
https://github.com/dddomodossola/remi/tree/master
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
safec fork with all C11 Annex K functions
This library implements the secure C11 Annex K functions on
top of most libc implementations, which are missing from them.
https://rurban.github.io/safeclib/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lldpad package comes with utilities to manage an LLDP interface with
support for reading and configuring TLVs. TLVs and interfaces are individual
controlled allowing flexible configuration for TX only, RX only, or TX/RX
modes per TLV.
http://open-lldp.org/
Signed-off-by: Laurent Charpentier <laurent_pubs@yahoo.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The C++ REST SDK is a Microsoft project for cloud-based client-server
communication in native code using a modern asynchronous C++ API design.
This project aims to help C++ developers connect to and interact with
services.
This package is licensed under the MIT package and depends on BOOST
and OpenSSL/LibreSSL.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FlatBuffers is an efficient cross platform serialization
library for C++, C#, C, Go, Java, JavaScript, PHP, and
Python. It was originally created at Google for game
development and other performance-critical applications.
http://google.github.io/flatbuffers/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aoetools are programs for users of the ATA over Ethernet (AoE)
network storage protocol, a simple protocol for using storage over an
ethernet LAN.
Tested on Beaglebone Black.
Build tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- fix check-package warnings
- use SPDX license code, GPL-2.0
- use github helper
- pass TARGET_CONFIGURE_OPTS instead of just CC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Thomas: rename to tcf-agent, add missing dependency on BR2_USE_MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i2c-tools package has adopted the code of eeprog.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- propagate dependencies of selected packages in Config.in
- add missing Config.in comment about dependencies
- add missing upstream URL in Config.in
- add missing comment header in .mk file
- remove --disable-nls from configuration options, it is taken care
of by the package infrastructure
- remove --disable-dependency-tracking, it is taken care of in the
package infrastructure
- add $(TARGET_NLS_DEPENDENCIES) to <pkg>_DEPENDENCIES, since gconf
has optional NLS support
- add host-intltool to <pkg>_DEPENDENCIES, since gconf needs
intltool-update
- fix license: it's LGPL-2.0+, not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils provides the user-space utilities for the nilfs2
filesystem.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A json library that aims to make json feel like a first class data
type using C++11, json for modern c++ is a easy to use, flexible,
modern json library.
Design goals include:
- Intuitive syntax. In languages such as Python, JSON feels like a
first class data type. All the operator magic of modern C++ is used
to achieve the same feeling in c++.
- Trivial integration. The whole code consists of a single header file
json.hpp. That's it. No library, no subproject, no dependencies, no
complex build system. The class is written in vanilla C++11. All in
all, everything should require no adjustment of compiler flags or
project settings.
- Serious testing. The class is heavily unit-tested and covers 100% of
the code, including all exceptional behavior. Furthermore, it is
checked with Valgrind that there are no memory leaks. To maintain
high quality, the project is following the Core Infrastructure
Initiative (CII) best practices.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- use "json-for-modern-cpp" everywhere as the name of the package
- add <pkg>_INSTALL_TARGET = NO since it's a header only library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wolfSSL embedded SSL library is a lightweight and portable
SSL/TLS library.
Tested on Beaglebone Black using a tool called testsuite that
comes with wolfssl source code inside the testsuite/ directory.
To build it, we have to pass --enable-examples in the configure,
and then manually copy the binary to the rootfs. Also, to use
this tool, you will we need to copy the certs/* directory to the
rootfs.
Build-tested with test-pkg script.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas:
- wrap too long CONF_OPTS line that disables all the language
bindings
- use an intermediate BRLTTY_TEXT_TABLE variable to store the
qstripped version of BR2_PACKAGE_BRLTTY_TEXT_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- switch to the autotools build system, which supports static linking
properly
- add <pkg>_LICENSE_FILES
- add sha256 hash for the tarball, in addition to the md5 one
- add license file hash
- squash DEVELOPERS file addition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested on Beaglebone Black.
Build-tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- remove file removal in install command
- use DESTDIR and prefix instead of just prefix in install command.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas: invert ncurses/slang select to avoid a circular dependency,
add BR2_USE_MMU dependency inherited from slang.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the rtl8189fs WiFi driver. The driver is sourced
from jwrdegoede's and icenowy's work on GitHub:
repo: https://github.com/jwrdegoede/rtl8189ES_linux.git
branch: rtl8189fs
Driver is known to support Realtek RTL8189FTV chip.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OSTree is an upgrade system for Linux-based operating systems
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Thomas: use SPDX license code, fix license, it's GPL-2.0+ not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sample quest and testing quest are not included in SOLARUS_LICENSE
since it's notinstalled by default.
Remove Werror when building with debugging symbols.
Add libpng runtime dependency since solarus games require png image
support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rygel is a home media solution (UPnP AV MediaServer) that allows you to
easily share audio, video and pictures to other devices.
Additionally, media player software may use Rygel to become a
MediaRenderer that may be controlled remotely by a UPnP or DLNA
Controller.
Rygel achieves interoperability with other devices in the market by
trying to conform to the very strict requirements of DLNA and by
converting media on-the-fly to formats that client devices can handle.
Most Rygel functionality is implemented through a plug-in mechanism.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- use SPDX license codes
- add hashes for license files
- move Config.in comment at the end of the Config.in file to not
break the indentation of the sub-options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes since v2:
- remove newlines from Config.in
- add LICENSE hash
Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0
Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package enables access to firmware blobs from Armbian firmware
repository: https://github.com/armbian/firmware
That repository contains multiple firmware blobs grouped by vendor.
For the sake of convenience each group can be independently selected
using Kconfig options. This commit enables the following options:
- firmware blobs for XR819 SDIO WiFi chip
- firmware blobs for AP6212 WiFi/BT combo
Armbian firmware repository does not include any specific licenses.
Most part of those firmware blobs belongs to various Android/Linux
SDK packages provided by board vendors. As a result, this package
makes use of the following conservative approach for all the
selected firmware binaries:
FIRMWARE_LICENSE = PROPRIETARY
FIRMWARE_REDISTRIBUTE = NO
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At this point, libressl can be added to the openssl virtual package.
- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quoting http://www.linphone.org/technical-corner/bcg729/downloads
regarding patent information:
"ITU G729 Annex A/B were offically released October/November 1996
(https://www.itu.int/rec/T-REC-G.729), hence all patents covering these
specifications shall have expired in November 2016.
Patent pool administrator confirmed most licensed patents under the
G.729 Consortium have expired (http://www.sipro.com/G729.html)."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add license file hashes and use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: Add license file hash, use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also provides libraries, so install in staging as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dahdi-linux provides kernel modules to drive a variety of telephony
cards, ranging from low-end one-channel to higher-end multi-channel
cards. It also provides headers for userland to talk to those cards.
With a bit of love, dahdi-linux can use our kernel-module
infrastructure. Wee! :-)
Still, there are a few specificities about dahdi-linux.
First, it needs to install a few binary firmware blobs, which it wants
to download at install time. Since we do want to be able to do
completely off-line builds, we need to downlaod them manually. So we
have the full list of firmware blobs (even if some can only be used on
an i386/x86_64 target, we still uconditionally download them), for which
we have locally-computed sha256 (no hash provided by upstream for the
blobs).
Second, the install procedure for the firmware blobs needs to have
access to the Linux kernel .config file, so it can decide whether to
install the blobs or not. We can force not to install them, but we can't
force to install them... :-/ And anyway, we'd have to do the same check
as is already done by dahdi-linux, so no need to duplicate that.
Finally, the licensing is relatively weird. Although it is obvious and
straightforward for the most part of dahdi-linux, consisting of mostly
GPLv2 and a few LGPLv2.1, there is one gotcha.
Of the firmware blobs, one is provided as a .o file, with no licensing
information whatsoever, without any source available from upstream, but
is directly linked to a GPLv2 file.
This is very concerning, but there is not much we can do about it,
except delegate to the legal reviewer whether that is acceptable or not.
AS an aside, dahdi-linux drivers do not build with a kernel 4.0 or
later, as it uses internals that have been removed in linux-4.0. There
has been no update upstream dahdi-linux to fix that. There's not much we
can do, except warn the user in the help text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: use SPDX license names and add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Asterisk: the flagship of telephony on Linux. These are the lines of
code whose continuous mission is to power small and large enterprises
telephony systems, to boldly provide IP PBX where no one has done so
before.
But it is a hell to get compiled... :-(
For starters, it needs a host tool, menuselect, to prepare its build
configuration. Unfortunately, the way it handles menuselect does not
apply very well for cross-compilation: the main ./configure calls out to
menuselect's own ./configure, and of course that runs with the same
environement, which is wrong for cross-compilation (because of variables
like CC, CFLAGS and the likes).
Furthermore, the paths to menuselect are imbricated about everywhere in
the main Makefile, so making it find menuselect in PATH is a lost cause.
Instead, we just patch-out the handling of menuselect, build it as the
host variant and copy it in place.
Now, asterisk wants to install a default set of sound files (for
answering machine stuff, I guess). They come come pre-bundled in the
official archive [0], but the buildsystem will want to download (at
install time) the sha1 files for each sound archive, to validate that
said archive is correct. However, the download is done via plain http,
so it still risks an MITM attack. And for Buildroot, it is not always
possible to download at install time, so we patch-out the sha1 check.
[0] http://downloads.asterisk.org/pub/telephony/asterisk/releases/
The official archive contains the sound archives plus a full set of
documentation. This makes it very big. Unfortunately, the hosting site
is rather slow, topping at about ~204kbps. So we get the archive from
the official mirror on Github. But that archive is missing the sound
archives, so we download them separately.
Some tests, like the crypt() one, are broken and could not have ever
possibly worked at all. Worse, the FFmpeg test is looking for headers
that FFmpeg removed more than 10 years ago and are virtually no longer
available in any distro. So, FFmpeg support is definitely not tested
by upstream and can't possibly work at all. Finally, trying to run
test-code does not work in cross-compilation.
As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it.
Almost all features are disabled for now. Support for additional
features will be added in subsequent patches now that we have a working
base.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- make libilbc a mandatory dependency instead of using the bundled one;
- add license, license files, and license file hashes;
- minor spelling corrections;
- remove redundant trailing backslash reported by check-package;
- rewrap help text to 72 columns instead of 68]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
fscryptctl is a low-level tool written in C that handles raw keys and
manages policies for Linux filesystem encryption.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-common implies
that it is common to all skeletons, yet it does not apply to
skeleton-custom. It is only common to the skeleton-init-* packages, so
name it the same way.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host variant is needed to generate long description
for python-automat package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds libb64, a library of ANSI C routines for fast
encoding/decoding data into and from a base64-encoded format.
The package contains a static library, headers, and an executable.
The latter, however, requires C++ and offers no advantages over busybox
or coreutils base64, so it is not installed. Therefore, nothing is
installed to target.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout:
- properly wrap Config.in
- move from Crypto to Other menu
- don't install to target
- don't make headers executable
- don't add -D to install with multiple source files
- extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: minor tweaks in Config.in file, adjust .mk file for
static+shared build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PaX regression test suite
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for official python bindings availibe as a part of systemd
project at: https://github.com/systemd/python-systemd
Minimal config snippet for utils/test-pkg is as follows (sans
backslashes):
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_SYSTEMD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though PyPI says the license is BSD, GitHub repo has an MIT license
file since April 2017 and upstream setup.py was also fixed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ifupdown scripts can be used independently of the init system, be it
sysv, busybox or systemd; they could even be used when there is no init
system (i.e. the user is providing his own).
Currently, those ifupdown scripts are bundled in the skeleton.
But we soon will have a skeleton specific to systemd, so we would be
missing those scripts (when systemd-networkd is not enabled).
So, move those scripts to their own package.
To keep the current behaviour (before it is changed in future commits),
we make that package default to y, but depend on the default skeleton.
Instead of being a target-finalize hook, the scripts are installed as
any other package are, with a package install-target command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop empty IFUPDOWN_SCRIPTS_SOURCE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package for pixz (pronounced pixie), a parallel, indexing version of
xz.
See https://github.com/vasi/pixz
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The utils provided by this package were formerly packaged with libva.
Libva contained a patch not to compile mpeg2vldemo to reduce
dependencies by avoiding C++, this patch is not moved to this package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: Mention that openssl is a runtime dependency,
Add license info as noted by Romain, add gpl-2.0.txt,
Add comment explaining the missing build step,
Use install -t for x509-types files]
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Despite newer versions being available, this patch creates a package
for version 2017-05-05, because newer version have issues that need to
be addressed.
Still, the projects install target installs the wrong files, so custom
commands are needed for staging_install and target_install.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two upstreamable patches for this package to fix uClibc
and musl builds.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds xradio wireless driver for SDIO WiFi chip XR819.
The out-of-tree driver is sourced from fifteenhex's work
on github https://github.com/fifteenhex/xradio
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: "depends on" before "select" in Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove input-tools, it has been obsoleted by linuxconsoletools
linuxconsoletools uses the same name as upstream and carries
the latest version of the tools installed by input-tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linuxconsoletools contains the inputattach utility
to attach legacy serial devices to the Linux kernel
input layer and joystick utilities to calibrate and
test joysticks and joypads.
The buildroot package adds options to build only certain
tools.
website: http://sf.net/projects/linuxconsole/
Signed-off-by: Koen Martens <gmc@sonologic.nl>
[Thomas: minor tweaks to Config.in and .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.
website: http://ultravideo.cs.tut.fi/
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'python-backports-shutil-get-terminal-size'[1] package to
buildroot. Needed by IPython when building against Python2.
[1] https://pypi.python.org/pypi/backports.shutil_get_terminal_size
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'pathlib2'[1] package to Buildroot. Needed by 'pickleshare'
package, which is added in the next patch.
[1] https://pypi.python.org/pypi/pathlib2
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the Linux PTP Project package.
http://linuxptp.sourceforge.net/
The SysV and systemd init scripts start the daemon in slave-only mode on eth0
and synchronize the system clock to PTP.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'ipython_genutils'[1] package to Buildroot. Needed by 'traitlets'.
[1] https://pypi.python.org/pypi/ipython_genutils
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: take into account comments made by Yegor:
- fix alphabetic ordering in the DEVELOPERS file
- fix comment in hash file
- add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OAuth2 library for Erlang
https://github.com/processone/p1_oauth2
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
firejail has been marked as broken since 3ad100fdcb
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Chris Frederick <chrisf@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ola does not build with current protobuf. Upstream bug report is still open.
https://github.com/OpenLightingProject/ola/issues/1192
Cc: Dave Skok <blanco.ether@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A C++ library of designs, containing flexible implementations of
common design patterns and idioms.
Sigend-off-by: Corentin GUILLEVIC <corentin.guillevic@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: simplify target installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'decorator'[1] package to Buildroot. Needed by 'traitlets'
package, which is added in the next patch.
[1] https://pypi.python.org/pypi/decorator
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: download from PyPi, add hash file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.
Note that to successfully download the firmware bluez5_utils needs a patch[1].
Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.
[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html
[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for atest application, which is useful for testing
alsa kernel drivers and detecting if playback/capture work correct
without artifacts, such as channel swap.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: add missing Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for libgphoto2 core library designed to allow access to
digital camera.
Signed-off-by: Kevin JOLY <kevin.joly@sensefly.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use downloads.sourceforge.net
- Remove final dot at end of <pkg>_LICENSE variable
- Minor tweaks in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host package will be needed by tvheadend.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- group the host commands together and the target commands together
- use --prefix=$(HOST_DIR)/usr for host configuration, and do not
override PREFIX= at host install time
- use DESTDIR=$(TARGET_DIR) instead of overriding PREFIX= at target
install time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
checkpolicy is currently a host-only package, however it is a
dependency of audit2allow. This patch allows for checkpolicy to be
compiled for the target.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- remove LIBSELINUX_INSTALL_STAGING = YES, doing it in
checkpolicy.mk is wrong, and libselinux is already installed to
staging
- add "select BR2_PACKAGE_LIBSELINUX" in Config.in, and propagate the
necessary dependencies
- add host-flex in dependencies, since it is also needed (in addition
to target flex).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sepolgen is currently a host-only package, however it is a dependency
of audit2allow. This patch allows for sepolgen to be compiled for the
target.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- fix formatting of Config.in file
- add missing dependencies inherited from the fact that the package
selects python3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream tarball isn't available, no releases since ten years. The
latest change to upstream git is from 2014. Better use rpcbind for any
RPC portmapper service.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: make the legacy option select rpcbind, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
C library for the MaxMind DB file format
The libmaxminddb library provides a C library for reading
MaxMind DB files, including the GeoIP2 databases from MaxMind.
This is a custom binary format designed to facilitate fast
lookups of IP addresses while allowing for great flexibility
in the type of data associated with an address.
The MaxMind DB format is an open format. The spec is available
at http://maxmind.github.io/MaxMind-DB/. This spec is licensed
under the Creative Commons Attribution-ShareAlike 3.0 Unported
License.
http://maxmind.github.io/libmaxminddb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove complicated DIEHARDER_POST_PATCH_FIXUP that replaces bogus
libtool .m4 files: since we are anyway autoreconfiguring the
package, this is not necessary. And therefore, remove host-libtool
in the dependencies.
- use GPL-2.0 instead of GPLv2
- add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Library tasked with managing, extracting and handling media art caches
https://github.com/GNOME/libmediaart
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry to DEVELOPERS file, fix license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We actually prefer the version 7.2.641 (over 7.2.646) as the
content of the release is identical and the 641 has the advantage
of providing a proper .tar.xz file.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backport a patch from SuperTux project:
61d3b63abc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Augeas is a configuration editing tool. It parses configuration files in
their native formats and transforms them into a tree. Configuration
changes are made by manipulating this tree and saving it back into
native config files.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Romain Naour <romain.naour@gmail.com>
[Thomas: fix Config.in comment dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- switch to version 9.21 now that it has been released
- add a hash file
- switch to Git formatted patches
- use $(HOSTCC) instead of hardcoding "gcc", and use $(HOST_CFLAGS) and
$(HOST_LDFLAGS) instead of hardcoding -L$(HOST_DIR)/usr/lib
-I$(HOST_DIR)/usr/include
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Thomas:
- remove jpeg, tiff and libpng dependencies, they do not seem to be
used
- add host-pkgconf as a dependency, since the configure script uses
PKG_CHECK_MODULES()
- pass --disable-opencl to explicitly disable OpenCL support
- add comment to explain why we don't add support for cairo, pango and
icu as optional dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add firmware files for the UART attached Bluetooth on TI Wilink series
wireless connectivity combo chips.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Thomas: rename config option so that it has the BR2_PACKAGE_ prefix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a userspace library that allows easy use of crypto
interfaces exposed by the kernel.
A git tip is used instead of the last official release, as autotools
support and cross-compilation fixes have been added only very recently.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas:
- Change sub-option prompt to "build test applications"
- Be more specific about the license: the library is under BSD-3c only,
while the programs are under BSD-3c or GPLv2.
- Explicitly disable programs when BR2_PACKAGE_LIBKCAPI_APPS is not
enabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.2.x branch is no longer maintained, so remove it since it's
likely security-vulnerable.
mbedtls is the modern replacement which was renamed from polarssl when
ARM bought them up.
However major releases broke API so polarssl 1.2.x isn't always
interchangeable with polarssl/mbedtls 1.3.x (interim mixed naming
because of new ownership) or newer 2.x series.
Fortunately we don't have any package in the tree that uses polarssl
exclusively.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- Remove entry in DEVELOPERS file for this package. Noticed by Arnout.
- Remove comment in bctoolbox.mk that no longer makes sense after
polarssl removal. Noticed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[Thomas:
- Add entry to DEVELOPERS file for the new package
- Add dependency on !BR2_STATIC_LIBS, because the Makefile
unconditionally builds a shared library
- Use the "github" helper function to define <pkg>_SITE, get rid of
<pkg>_SOURCE.
- License is BSD-2c, not just BSD.
- Add <pkg>_LICENSE_FILES variable.
- Define LIBSCRYPT_DISABLE_STACK_PROTECTOR inside the
BR2_TOOLCHAIN_HAS_SSP condition, and move from a
LIBSCRYPT_POST_EXTRACT_HOOKS to a LIBSCRYPT_POST_PATCH_HOOKS.
- Pass $(TARGET_CONFIGURE_OPTS) instead of just passing CC.
- Pass $(TARGET_MAKE_ENV) when calling $(MAKE).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-linux-init, a set of minimalistic tools to
create a s6-based init system, including a /sbin/init program, on a
machine running a Linux kernel.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-linux-utils, a set of minimalistic
Linux-specific system utilities.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-portable-utils, a set of tiny general Unix
utilities, often performing well-known tasks such as cut and grep, but
optimized for simplicity and small size.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-rc, a service manager for s6-based systems,
i.e. a suite of programs that can start and stop services, both
long-running daemons and one-time initialization scripts, in the proper
order according to a dependency tree.
The host variant is provided so s6-rc-compile is available and can
be used to build the services database offline, either in a package
Makefile or a post-build script.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-networking, a suite of small networking
utilities for Unix systems.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-dns, a suite of DNS client programs and
libraries for Unix systems, as an alternative to the BIND, djbdns or
other DNS clients.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6, a small suite of programs for UNIX,
designed to allow process supervision (a.k.a service supervision), in
the line of daemontools and runit.
The host variant is provided as it is required to build the host
variant of s6-rc. Only the libraries and headers are installed.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firejail Security Sandbox
https://firejail.wordpress.com/
Lightweight application sandboxing system using seccomp and kernel
namespaces.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
[Thomas:
- Fix DEVELOPERS entry: use <> around the e-mail address instead of ()
- firejail builds fine with musl, so only exclude uclibc, which fails
to build with EM_ARM undeclared
- Update to upstream version 0.9.44.8.
- Remove FIREJAIL_MAKE_OPTS, as suggested by Romain Naour.
- Pass --enable-busybox-workaround only if Busybox is enabled, as
suggested by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have decided that lua packages should have a name that starts with
lua (like is the case for python and perl). However, we're not going to
rename all the existing lua packages that don't start with lua. This
makes it unclear for people adding packages how they should name the
package, so add a comment to package/Config.in to explain it.
It's rather terse but it gets the message across.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for kmscube application, which is helpful for testing
kms/drm drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
GTest version 1.8.0 includes gmock so merge both packages inside gtest
In this merge:
- Add gmock as a suboption of gtest (BR2_PACKAGE_GTEST_GMOCK)
following advice from Arnout Vandecappelle
- Add BR2_PACKAGE_GMOCK as a legacy entry, selecting BR2_PACKAGE_GTEST
and BR2_PACKAGE_GTEST_GMOCK.
- Use cmake to install libraries and headers and add missing files
(gtest.pc, gtest-config, gmock.pc) in
GTEST_POST_INSTALL_STAGING_HOOKS instead of redefining
GTEST_INSTALL_STAGING_CMDS
- Remove patch on Python as gmock/gtest now supports python 3.0
(commit 456fc2b5c4e9ebf05a5987dfe1ff0ac9ffeb53cc)
- Add the correct license in HOST_GTEST_LICENSE as all python code in
googlemock/scripts/generator is licensed under Apache-2.0 and not
BSD-3c
- Fix URL of gtest project in Config.in
- Remove the gmock entry from DEVELOPERS
- Install gmock_gen directly, instead of as a symlink to gmock_gen.py
Notice that any external package that depends on gmock will cause an
immediate build termination because make doesn't know how to build
gmock. Since the user has just removed gmock from the legacy menu, it
should be quite obvious what needs to be done.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use += instead of = when assigning a value to <pkg>_DEPENDENCIES in
conditional
- Remove comment about the "tricky logic" around BUILD_GTEST and
BUILD_GMOCK
- Move GTEST_GMOCK_INSTALL_MISSING_FILE inside
the ($(BR2_PACKAGE_GTEST_GMOCK),y) condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the python binding for libftdi to buildroot.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed to make luaposix work.
The upstream name is just "bit32", but the luarocks infra doesn't
support an upstream name different from the Buildroot name. We therefore
have to explicitly set all variables and we need custom extract
commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add entry to DEVELOPERS file
- remove useless "depends on BR2_PACKAGE_HAS_LUAINTERPRETER" in
Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cosmo package has been marked as broken for two and a half years
now, and nobody cared. Get rid of it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since this package really is a Lua extension, it fits under the Lua
libraries menu.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides execline, a (non-interactive) scripting language,
like sh, used in the s6 supervision system.
The host variant is provided as it is required to build and run the host
variants of s6 and s6-rc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
memtool allows one to read and write memory mapped registers via /dev/mem.
The commands are inspired by the respective commands of the barebox
bootloader. This is handy during driver development to inspect and modify
register settings. It can also be used to modify regular files and
character devices (e.g. to paint to /dev/fb0).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lugaru needs SDL2 library with OpenGL support which require X11 support.
Otherwise Lugaru error out with "No dynamic GL support in video driver"
message.
https://osslugaru.gitlab.io/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
[Thomas:
- rewrap Config.in help text
- add dependency on !BR2_STATIC_LIBS since the code uses libdl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gqrx is an open source software defined radio (SDR) receiver implemented
using GNU Radio and the Qt GUI toolkit. Currently it works on Linux
and Mac with hardware supported by gr-osmosdr, including Funcube Dongle,
RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR.
Gqrx can operate as an AM/FM/SSB receiver with audio output or as an
FFT-only instrument. There are also various hooks for interacting
with external application using network sockets.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove unneeded dependency from Config.in, inherited from Qt5
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gunicorn ‘Green Unicorn’ is a Python WSGI HTTP Server for UNIX. It’s a
pre-fork worker model ported from Ruby’s Unicorn project. The Gunicorn
server is broadly compatible with various web frameworks, simply
implemented, light on server resource usage, and fairly speedy.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Minimalistic C client for Redis >= 1.2
It is minimalistic because it just adds minimal support for
the protocol, but at the same time it uses a high level
printf-alike API in order to make it much higher level than
otherwise suggested by its minimal code base and the lack of
explicit bindings for every Redis command.
https://github.com/redis/hiredis
[Peter: use install -t / -D, fix arguments]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: git is a runtime dependency, use pkg-config for openssl
dependencies, use make install]
Signed-off-by: Francesco Negri <francesconegri@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allow bootloader modification online on Tegra-targets
Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix license, it's MIT, not BSD
- use TARGET_CONFIGURE_OPTS instead of manually passing CC and AR
- use full destination path
- keep only sha256 hash
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- manually install things, it's easier than using the flawed install
rules of the package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix download location
- remove <pkg>_SOURCE variable, it was the default value
- remove trailing space
- keep only sha256 hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep is a tool for displaying SIP calls message flows from terminal.
It supports live capture to display realtime SIP packets and can also
be used as PCAP viewer.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- ncurses wide char and other sub-options are not needed to build
sngrep, so they are removed, as well as the wchar
dependency. ncurses with wchar support is only needed when
--enable-unicode is passed, but even then, it doesn't work because
the configure script searches <ncursesw/ncurses.h>, so unicode
support has been explicitly disabled.
- add optional dependencies on OpenSSL, GnuTLS and PCRE. This also
makes sure they are explicitly enabled/disabled depending on the
configuration.
- add upstream URL in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mutagen is a Python module to handle audio metadata.
It supports ASF, FLAC, MP4, Monkey’s Audio, MP3, Musepack, Ogg Opus,
Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, WavPack,
OptimFROG, and AIFF audio files. All versions of ID3v2 are supported,
and all standard ID3v2.4 frames are parsed.
It can read Xing headers to accurately calculate the bitrate and
length of MP3s. ID3 and APEv2 tags can be edited regardless of
audio format. It can also manipulate Ogg streams on an individual
packet/page level.
Mutagen works with Python 2.7, 3.3+ (CPython and PyPy) on Linux,
Windows and macOS, and has no dedependencies outside the
Python standard library.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license, it's GPLv2, not LGPLv2+
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- keep only sha256 hash, not needed to have md5 and sha1 when sha256 is
provided
- add BR2_USE_MMU dependency, since the program uses fork()
- remove UDPXY_MAKE_OPTS, and use the appropriate options during the
build and install steps directly
- use TARGET_MAKE_ENV in the build and install steps]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flask-Babel is an extension to Flask that adds i18n and l10n support
to any Flask application with the help of babel, pytz and
speaklater. It has builtin support for date formatting with timezone
support as well as a very simple and friendly interface to gettext
translations.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A collection of tools for internationalizing Python applications.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
