Normally, the Buildroot toolchain logic copies all required libraries from
the external toolchain to the staging directory, including the dynamic
loader ld-*.so.
There are cases, however, where the dynamic loader is _not_ automatically
copied to staging. This happens when the dynamic loader is not inside
ARCH_LIB_DIR itself (e.g. lib64), but instead resides in 'lib' (assume, of
course, that ARCH_LIB_DIR != 'lib').
Currently, this is fixed in a toolchain-specific fixup, e.g. by recreating a
missing symlink or copying over a missing file. Such toolchain specific
fixups are not very nice.
Moreover, in a subsequent patch, the value of ARCH_LIB_DIR changes for some
toolchains, causing them to have the same problem of a missing dynamic
loader. This used to be the case for older Linaro toolchains with libraries
in 'lib/<tuple>': Buildroot used to set ARCH_LIB_DIR=lib but the mentioned
patch changes it to 'lib/<tuple>' instead. As a result, the files directly
under 'lib/' will no longer be copied. There should be none, but the dynamic
loader is a notable exception.
[Note: support for these older Linaro toolchain has been removed in 2016.11]
Instead, copy over the ld.so file(s)/link(s) from the extracted toolchain
into staging, in the central copy_toolchain_sysroot function. The existing
toolchain logic will then handle the copy of these files from staging to
target.
This means the toolchain-specific fixups can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_arm_abi function takes as second argument the path to the
cross-readelf, but does not use it. Therefore, this commit gets rid of
this unnecessary argument.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current test to verify if the toolchain uses musl or not is based on
checking if /lib/libc.so or /lib/libm.so exist in the sysroot. However,
some toolchains (notably Crosstool-NG ones) put these libraries in
/usr/lib/.
To fix this, build a minimal C program and check if the program
interpreter contains /lib/ld-musl.
Signed-off-by: Ilya Kuzmich <ilya.kuzmich@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TOOLCHAIN_EXTERNAL_READELF is defined to
$(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX), where
TOOLCHAIN_EXTERNAL_SUFFIX is .br_real for Buildroot
toolchains. However, this is bogus, because readelf is not wrapped by
the Buildroot toolchain wrapper, so "<arch>-readelf.br_real" never
exists.
Therefore, it should simply be defined as
$(TOOLCHAIN_EXTERNAL_CROSS)readelf. Currently,
TOOLCHAIN_EXTERNAL_READELF is not used anywhere, so it wasn't visible,
but a follow-up commit will make use of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu-2.7.1-2.fc25 and the qemu_aarch64_virt_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu-2.7.1-2.fc25 and the qemu_arm_vexpress_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sync external prebuilt toolchain with the one we now build in Buildroot,
i.e. arc-2016.09. Since that prebuilt toolchain finally has IPv6 enabled
it works pretty fine for building packages in Buildroot.
Still note:
1) There might be subtle differences between uClibc configuration
compared to Buildroot's one.
2) A couple of patches we apply on top of Builroot-built toolchain
are obviously missing in the prebuilt version - they will be
available in the next release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vlad Zakharov <vzakhar@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The variables LIBC_A_LOCATION and ARCH_LIBC_A_LOCATION were killed in commit
646bd86908 but the corresponding descriptions
were never removed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 since it's not fixed in
Binutils 2.26.
Runtime tested with an experimental version of Qemu 2.7 for Nios2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream link to download musl-cross prebuilt toolchain is dead [1] and
there no new download location. Also the last prebuilt toolchain use musl
1.1.12 version which is not uptodate (currently 1.1.15).
Remove this support and recommend to use Buildroot toolchain instead.
[1] https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain uses GCC 4.8.x, which doesn't support the ARMv8 cores.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
My local 'next' branch was not uptodate, so the previous merge was missing
the most recent changes.
Thanks to François Perrad for noticing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested with Qemu v2.7.0 and the qemu_aarch64_virt_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu-2.4.1-11.fc23 and the qemu_arm_vexpress_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain has many problems which are fixed in contemporary gcc
and uClibc-ng. In addition, several hacks are needed to be able to
work with this toolchain. All these hacks are removed as well. Also
the package exceptions for this toolchain are removed.
The BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
options don't get a legacy entry. For the ADI toolchain, there already
is a legacy entry, so it doesn't make sense to add it twice. For other
external toolchains, these options didn't actually work, because they
rely on the specific layout of the ADI toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently support gcc as old as 4.3. However, Buildroot works
perfectly well with even older gcc versions (tested with 4.1). So we
can add an option BR2_TOOLCHAIN_EXTERNAL_GCC_OLD to support that. The
help text of this option is written with plenty of discouragement.
We use _OLD and not something like _PRE_4_3, because at some point we
will likely remove the 4.3 option and what would then require a name
change.
We don't set any _AT_LEAST option in this case because it's no use -
there is no lower bound on the version in this case. We therefore leave
BR2_TOOLCHAIN_GCC_AT_LEAST empty (the implicit default). When it is
empty, we don't do a version check at all in check_gcc_version
(previously we errored out when it was empty).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago toolchains are no longer maintained and haven't been updated
for a long time.
With this removal, all the legacy toolchain-external support can be
removed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Synopsys external toolchain for
the ARC architecture.
The legacy implementation is removed.
Note that this toolchain is marked as BROKEN, but 2016.09 seems about
to be released so maybe it will be unbroken soon.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package to support custom external toolchains.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the pre-built Musl external
toolchains.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the i386/x86_64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AMD-64 architecture.
The legacy implementation is removed.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the SuperH 4a architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the nios-II architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Codescape MTI external toolchain
for the MIPS architecture.
The legacy implementation is removed.
The Codescape hacks for IMG and MTI are duplicated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Codescape IMG external toolchain
for the MIPS architecture.
The legacy implementation is removed.
The Codescape hacks for IMG and MTI are duplicated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the MIPS architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Analog Devices external toolchain
for the Blackfin architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for the
ARM Big-endian architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the ARM architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for the
ARM architecture.
The legacy implementation is removed.
The comment about availability is duplicated for arm and armeb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AArch64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for
the AArch64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external-package infrastructure is just a copy of the
toolchain-external commands, replacing TOOLCHAIN_EXTERNAL by $(2)
and adding double-dollars everywhere.
toolchain-external itself is converted to a virtual package, but it
is faked a little to make sue the toolchains that haven't been
converted to toolchain-external-package yet keep on working.
The TOOLCHAIN_EXTERNAL_MOVE commands don't have to be redefined
for every toolchain-external-package instance, so that is moved
out into the common part of pkg-toolchain-external.mk.
The musl-compat-headers dependency stays in the toolchain-external
package itself.
The musl ld link is duplicated in the legacy toolchain-external and
the toolchain-external-package, because they have separate hooks.
The handling of TOOLCHAIN_EXTERNAL_BIN deserves some special attention,
because its value will be different for different
toolchain-external-package instances. However, the value only depends
on variables that are set by Kconfig (BR2_TOOLCHAIN_EXTERNAL_PREFIX
and BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD) so it can easily be used in
the generic part. So we don't have to do anything specific for this
variable after all.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-toolchain-external.mk will be used later to define the
toolchain-external-package infra. Most of the variable and macro
definitions are shared with the legacy generic-package based
toolchain-external. Move these to pkg-toolchain-external.mk.
pkg-toolchain-external.mk is included implicitly by the include
toolchain/*/*.mk in the top-level Makefile. The order of inclusion is
not defined, but that doesn't matter because none of the variables
defined in pkg-toolchain-external.mk are used in conditions or in
rules in toolchain-external.mk, only in recursively-expanded
variables.
No functional changes at all. The output of 'make -qp' hasn't changed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the toolchain-external logic will be split into separate packages,
the order in which things are defined in toolchain-external.mk no
makes less sense. So reorder things in a more logical fashion.
Also add a few more comments to the different sections.
No functional changes at all. The output of 'make -qp' hasn't changed,
except for the order of arguments in
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch, slightly change some comments,
reordered some parts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
m5101 is the -march option for GCC, but the real core name is M5150.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a microcontroller class (MCU) core which is not suitable for
running Linux.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARCH_SUBDIR is computed based on the value of ARCH_SYSROOT_DIR and
SYSROOT_DIR. For nested toolchains ARCH_SYSROOT_DIR is a subdir of
SYSROOT_DIR, so a sed command like this one...
sed -r -e "s:^${SYSROOT_DIR}(.*)/$:\1:"
...basically removes the leading SYSROOT_DIR part from ARCH_SYSROOT_DIR.
But, for side-by-side sysroot toolchains ARCH_SYSROOT_DIR and
SYSROOT_DIR are at the same level, so the above sed command doesn't
make any effect.
This patch therefore improves the calculation of ARCH_SUBDIR to
clearly handle the three possible cases:
- There is a single sysroot, or the selected architecture sysroot is
the main one (i.e SYSROOT_DIR == ARCH_SYSROOT_DIR). In this case,
ARCH_SUBDIR is empty.
- There are side-by-side sysroots, such as
SYSROOT_DIR=.../sysroot/mips-r2-hard/ and
ARCH_SYSROOT_DIR=.../sysroot/mipsel-r2-hard/.
- The arch-sysroot is nested, such as SYSROOT_DIR=.../sysroot and
ARCH_SYSROOT_DIR=.../sysroot/armv4t/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: improve the logic to handle the SYSROOT_DIR==ARCH_SYSROOT_DIR
case.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (namely x86-64), glibc may provide a libmvec
library since glibc 2.22, which programs built with gcc OpenMP support
might get linked to.
In order for these programs to work on the target, we need to copy
this library to the target filesystem.
This commit takes care of this for the external toolchain
situation. Note that libraries listed in TOOLCHAIN_EXTERNAL_LIBS are
silently ignored if they don't exist. Therefore, we don't need to have
any condition on the architecture or glibc version.
For more details on libmvec, see
https://sourceware.org/glibc/wiki/libmvec.
Fixes bug #9111.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain-wrapper was not reinstalled. So rules toolchain-external-reinstall,
gcc-initial-reinstall, gcc-final-reinstall didn't work as expected.
In add, normalize variable name: s/TOOLCHAIN_BUILD_WRAPPER/TOOLCHAIN_WRAPPER_BUILD/
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hook was needed by 1014.09 Linaro toolchains.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig and with
HOSTARCH set to x86 in the Buildroot main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Linaro release provide a new toolchain archive for i686 hosts, so update our
old 2014.09.
Tested with Qemu qemu-2.4.1-11.fc23 and with HOSTARCH set to x86 in the Buildroot
main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-march=m5101 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5101 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5101 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=m5100 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5100 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5100 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=interaptiv support starts from GCC-6, so disable previous
versions when selecting this core.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig.
As reported by Gustavo Zacarias, this defconfig is known to fail with qemu
versions lower than 2.6.0.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit a0aa7e0e17 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:
- The user has selected a "known toolchain profile", such as a Linaro
toolchain, a Sourcery CodeBench toolchain etc. People using "custom
toolchain profile" are not affected.
- The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
indicate that the toolchain is already locally available (as
opposed to having Buildroot download and extract the toolchain)
- The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
toolchain is directly available through the PATH environment
variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
will do something silly (remove the toolchain contents), but that
are limited to the toolchain itself.
When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.
This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e17.
Commit a0aa7e0e17 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22: core: do not attempt
downloads with no _VERSION set).
However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:
- Buildroot downloads the toolchain tarball (while we're saying the
toolchain is already available). Not dramatic, but clearly buggy.
- Buildroot registers a post-extract hook that moves the toolchain
from its extract directory (output/build/toolchain-external-.../ to
its final location in host/opt/ext-toolchain/). Before doing this,
it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
should normally be host/opt/ext-toolchain/).
Another mistake that caused the bug is commit
b731dc7bfb ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.
To address this problem, we:
- Revert commit a0aa7e0e17, so that
_SOURCE and _SITE are empty in the pre-installed toolchain case.
- Rework the code to ensure that similar problems will no happen in the
future, by:
- Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
only needed when Buildroot downloaded the toolchain.
- Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
is the path in which Buildroot installs external toolchains when it
is in charge of downloading/extracting them. Then, the
TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
is guaranteed to be non-empty.
- Replace the removal of the directory contents $(var)/* by removing
the directory itself $(var). The directory was anyway already
re-created if needed afterwards. Thanks to doing this, if $(var)
ever becomes empty, we will do "rm -rf" which will fail and abort
the build, and not the catastrophic "rm -rf /*".
Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.
In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl provides neither sys/queue.h nor sys/cdefs.h. Those two headers are
however quite widely used in a lot of packages (though they should at
least not use cdefs.h which is only full of mostly-legacy macros, and
which is mostly an internal header of glibc and was never really meant to
be exposed to, and used by packages).
But we don't live in an ideal world, so a lot of packages break when
those two headers are missing.
We already took care of sys/queue.h with the netbsd-queue package. But
the need for cdefs.h is getting more and more pressing.
We rename the netbsd-queue package into musl-compat-headers, and we
make it install sys/queue.h (from NetBSD) and sys/cdefs.h (a minimalist
one we bundle in Buildroot). We can't use the cdefs.h from NetBSD
because it includes machine-dependent headers; instead we bundle a very
minimalistic one, that covers only what we need.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have introduced the support for ARM no-MMU in Buildroot,
we need to update the dependencies of the musl external toolchain. It
supports only MMU-capable ARM cores, so it must depend on BR2_USE_MMU,
at least for the ARM platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM big-endian is different from ARMv4/5/6 and ARMv7. Big-endian on
ARMv4/5/6 is BE-32 while big-endian on ARMv7 is BE-8, which are not
compatible.
Therefore, the musl big endian toolchain that is built for ARMv4
cannot work for ARMv7, it can only work for ARMv4/5/6.
This commit updates the musl toolchain dependency accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As proposed initialy by Matthew Fornero [1], commonize the creation of
symlinks from {/usr}/lib to {/usr}/lib/<tuple> for Linaro toolchains.
This symlinks are only required for old Linaro toolchains.
[1] http://patchwork.ozlabs.org/patch/624577
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matthew Fornero <mfornero@mathworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Vincent: BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX also has fortran]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the custom external toolchain is locally available, we currently
define SITE/SOURCE to empty variables. Now that the package
infrastructure doesn't define a value for SOURCE when VERSION is empty,
it doesn't attempt to download a file anymore, so we can get rid of
those empty SOURCE/SITE variables in the toolchain-external package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Codescape toolchain uses a sysroot layout that places them
side-by-side instead of nested like multilibs. A symlink is needed much
like for the nested sysroots which are handled in copy_toolchain_sysroot
but there is not enough information in there to determine whether the
sysroot layout was nested or side-by-side.
For the above reason plus the fact that this is the only toolchain
needing this, better to handle that symlink creation using a hook which
will be executed only when that toolchain is selected.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The aarch64 Linaro toolchain source hash is not correct, probably due
to a copy/paste error. The new hash has been verified by downloading
the tarball, validating the signature, and computing the hash.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't enable SSP support on external toolchains just because they use
glibc or musl. Instead of that, make the external toolchains explictily
declare if they support SSP or not. And also add a check to detect SSP
support when using custom external toolchains.
For internal toolchains we always enable SSP support for glibc and musl.
Fixes:
http://autobuild.buildroot.net/results/ac7c9b3ad2e52abfe6b79a80045e4218eeb87175/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove uClibc-specific SSP check, since there is now a generic
check being done.
- send potential compilation errors caused by the SSP check to
oblivion, in order to avoid causing confusion for the user.
- add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain still use binutils 2.25 without the fix for PR19405.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our musl support has now been around for quite some time, numerous
packages have been fixed (although admittedly not all). It's time to no
longer call our musl support "experimental": things are now expected to
be working with musl just like with the other two C libraries we
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 919b4f9eab the internal symbol
LIB_EXTERNAL_LIBS was renamed TOOLCHAIN_EXTERNAL_LIBS but the find and
replace command also renamed BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS to
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS which doesn't exist.
So user provided libraries defined in BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
are not copied anymore to staging and target directories.
For example:
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS="libasan.* libubsan.*"
Simply revert this change by renaming
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS to BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Romain Naour, commit
4d39ca1c2a ("toolchain-external: fix
installation for CodeSourcery AArch64 toolchain") has a small bug where
a post-install hook doing fixups in TARGET_DIR was registered as a
staging installation hook while it should have been registered as a
target installation hook. This commit fixes this inconsistency.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash for the toolchain sources.
Runtime tested with Qemu with qemu_mips_malta_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 519d83bfa0 adds support for GCC
6. Add an GCC 6.x option for external toolchains, too.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.
Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.
Fixes:
http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As we currently download the actual sources as part of saving the
legal-info, we do not check the hashes of those downloads.
That's because, during legal-info, there is not package involved, and
thus there's no path to an actual .hash file.
However, this precludes legal-info from working in off-line mode. A
subsequent patch will make it possible to do so, and actual sources will
be downloaded as another classical package download.
This will have two consequences:
- first, we will be able to add hashes for actual sources, so we can
ensure their integrity,
- second, and as a direct consequence of the above, when a .hash file
is present, it would have to list all the hashes for that package,
or that would be treated as an error.
Currently, the only package that falls in this case is the external-
toolchain, for which we have means to retrieve the sources for some of
the toolchains.
So we just add hashes for those actual external-toolchain sources we may
have to download.
Those hashes are not used for now, but they'll come into play a few
patches down.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Abele <jason@nextthing.co>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the prebuilt musl toolchains provided by http://musl.codu.org/
had not been updated in a while, a new release based on musl 1.1.12
has been put online in December 2015. This commit updates our external
toolchain package to use this new pre-built toolchain.
Compared to the previous 1.1.6 toolchain, there are some changes:
- The MIPS big endian soft-float variant is no longer available.
- The Microblaze variant is no longer available.
- SuperH 4, both little and big endian, variants have been added.
- The components have been updated: gcc 5.3 is used, binutils 2.25.1,
and of course musl 1.1.12.
Besides the update itself, in this commit, we are:
- Making the musl toolchain non-selectable on MIPS big endian
soft-float.
- Making the musl toolchain actually work on MIPS little endian
soft-float, by downloading the right tarball and setting up the
right symbolic link.
- Removing support for the Microblaze variant, and adding support for
the SH4 variants.
All variants except armeb have been boot tested under Qemu, up to a
Busybox shell prompt. armeb has not been tested due to the lack of a
Qemu configuration for this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we have a pattern-matching that automatically derives the
the source tarball filename from the binary tarball filename.
However, the latest Linaro toolchains no longer follow that scheme (and
do not even readily provide the sources...).
Remove the generic pattern-matching, and explicitly set the source
tarball name for those toolchains that do have a source tarball readily
available.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using a configuration based on
qemu_arm_vexpress_defconfig with BR2_ARM_ENABLE_VFP and
BR2_ARM_EABIHF selected
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, following symbolic links are created in both target and
staging directories:
- lib(32|64) --> lib
- usr/lib(32|64) --> lib
The decision for lib32 or lib64 is based on the target architecture
configuration in buildroot (BR2_ARCH_IS_64).
In at least one case this is not correct: when building for a Cavium Octeon
III processor using the toolchain from the Cavium Networks SDK, and
specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, libraries are expected
in directory 'lib32-fp' rather than 'lib32' (ABI=n32; likewise for
lib64-fp in case of ABI=n64)
More generally the correct symbolic link is from (usr/)${ARCH_LIB_DIR}->lib.
However, feedback from Arnout Vandecappelle is that there are packages that
do depend on the lib32/lib64 symlink, even if ARCH_LIB_DIR is different.
Hence, these links must be kept.
Fix the problem as follows:
- For internal toolchains: no change
- For external toolchains: create a symlink ARCH_LIB_DIR->lib if
(usr/)ARCH_LIB_DIR does not exist yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Yann E. MORIN [1], the latest CS PowerPC toolchain (2012.03)
requires a PPC CPU with SPE, which is basically two variants, 8540 (e500v1) and
8548 (e500v2) in Buildroot. All other PPC CPU can't use that toolchain.
Keep CS PowerPC 2011.03 as latest available version and add a second Kconfig
symbol for the CS PowerPC 2012.03 since it's verry specific to one CPU type
(e500v2).
Previously it was possible to select the CS 2012.03 with a powerpc 8540 (e500v1)
CPU but the sysroot provided by the toolchain only support the 8548 (e500v2)
variant. Allow to select CS 2012.03 only with BR2_powerpc_8548.
Also re-add the previous CS toolchain handling for pixman and liquid-dsp.
[1] http://lists.busybox.net/pipermail/buildroot/2015-December/148308.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the introduction of the check that target packages must have
their Config.in option enabled, we started to see failures related to
netbsd-queue. Yann fixed the internal toolchain case in commit
e84fd04e88. This commit fixes the
similar issue, but for the external toolchain case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago armv7 toolchain really requires a VFPv3 unit, so only expose
it to the user when the CPU actually has such a VFP unit
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a few releases, the pre-built musl external toolchain has added
an ARM EABIhf variant, built for ARMv5T. This commit allows this
additional external toolchain to be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Just rename Kconfig symbols
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Rename the Kconfig symbol even if this toolchain is marked as broken.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old ADI toolchain handling in glog, openpgm and zeromq.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old CS toolchain handling in pixman and liquid-dsp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some package black list CS NIOSII toolchains, mainly due to _gp link
issue. A follow up patch can remove the restriction case by case.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Musl does not provide a 'sys/queue.h' implementation, and this has been
a problem for packages that depend on it.
So lets create a package called netbsd-queue that will install a
'sys/queue.h' in the staging directory when enabled, based on the
NetBSD implementation.
Musl toolchain and external toolchain packages will depend on this
package, so that 'sys/queue.h' will be always installed when compiling
with a musl based toolchain.
Tested on ARM and x86 in the following cases:
- Buildroot musl toolchain.
- External musl toolchain without 'sys/queue.h'.
- External musl toolchain with 'sys/queue.h'.
Fixes:
http://autobuild.buildroot.net/results/24bad2d06ab40024dacf136bee722072d587f84e
And possibly many others.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the latest Linaro toolchain, the gdbserver has moved (surprise!)
and is now located side-by-side with the toolchain executables.
This commit adds this path as a new location where to search for a
gdbserver, and while at it wraps the line that has become too long in
the process.
[Thomas: rework commit log according to Yann's suggestion.]
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.
Simply remove the destination contents before moving.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The backfin toolchains come in two archives.
We extract the first (main) archive using the generic extract commands,
while the second is extracted as a post-extract hook.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that packages can provide a list of files to be excluded when
extracting their archive, downloaded external toolchains are no longer
special in this respect.
Still, those toolchains are currently extracted directly into their
final location, $(HOST_DIR)/opt/ext-toolchain/ which means we still
need a custom extract command.
Except, we don't really need it: we can just move the toolchain, after
it's been extracted by the generic extract command, with a post-extract
hook.
This means that:
- we now extract the toolchain with the generic extract command,
- the toolchain is thus extracted into $(@D) ,
- fixup commands are run against $(@D), as a post-extract hook,
instead of against $(HOST_DIR)/opt/ext-toolchain ,
- once this is done, we move $(@D)/* into the final location with a
new post-extract hook.
Note: the blackfin case is special, and will be handled in a follow-up
patch.
[Thomas: register the TOOLCHAIN_EXTERNAL_FIXUP_CMDS only for the Arago
case, add some additional comments in the code about why we're moving
the toolchain around.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the blackfin external toolchains, we tell tar to
extract files with the --hard-dereference. However, --hard-dereference
is only meaningful when creating an archive, not when extracting
it. Therefore, let's drop this option.
[Thomas: rework commit title and commit log, after some suggestions
from Arnout.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: tweak Config.in help text to actually match this toolchain
instead of being a wrong copy/paste from the old Linaro toolchain for
ARMeb.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: s/eglibc/glibc/ as noticed by Baruch.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the CodeSourcery toolchains for MIPS can be selected to build
mips32 (revision level 1) targets, but the resulting binaries are built
for mips32r2 instead. This is because these toolchains don't have
library support other than mips32r2, so there is no point to allow the
selection of a mips32 variant with a CodeSourcery MIPS toolchain, since
everything will be built for mips32r2 instead.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot internal toolchain now adds a wrapper. When we use a
buildroot toolchain as an external toolchain, we want to bypass this
wrapper and call the compiler directly, for two reasons:
1. The options added by the wrapper are not necessarily appropriate
when it is reused as an external toolchain. For instance, ccache
may have been enabled while building the toolchain but not when
using it as an external toolchain.
2. Currently, the wrapper expects to reside in .../usr/bin, but when
used as an external toolchain it will be in .../ext-toolchain/bin.
Therefore, the wrapper can't find the real binary and sysroot
anymore.
To bypass the wrapper, we check for the existence of *.br_real files in
the external toolchain directory. If any such file exists, the wrapper
will add the .br_real suffix for all the wrapped files. Note that the
wrapper doesn't check if the *.br_real exists for each individual
wrapped file, it just assumes that all wrapped files have a
corresponding .br_real. This is currently true but that may change in
the future of course.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Add support for mips32r6 and mips64r6 target architecture variants
- Disable unsupported gcc versions
- Disable unsupported binutils versions
- Disable unsupported external toolchains
- Disable unsuported C libraries
- Add a hook in order to make glibc compile for MIPS R6.
[Thomas: slightly tweak the glibc hack explanation, to make it
hopefully clearer.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those two comments:
- are exactly the same
- have the same dependencies (except for arm/armeb)
So, make it a common comment. It will be useful to have that comment
when we introduce new Linaro toolchain versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper will be reused for the internal toolchain, so it
belongs in the toolchain directory. Also, the ext- prefix is removed
from it. The build commands are moved to a new toolchain-wrapper.mk.
The wrapper arguments that are also relevant for the internal toolchain
wrapper are moved to toolchain-wrapper.mk, the rest stays in
toolchain-external.mk.
While we're at it, move the building of the toolchain wrapper to the
build step of toolchain-external. There is no specific reason to do
this, other than that it fits better semantically. Also remove the
MESSAGE call, otherwise we'd see:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Building toolchain wrapper
/usr/bin/gcc ...
Having an extra "Building toolchain wrapper' message is pointless.
The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
always true because it wasn't qstrip'ped first, so clearly it works
without that condition as well.
Also rewrapped some comments and removed the 'external' reference.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some external toolchain vendors the actual source code URL can be simply
derived from the binary file URL.
Here we obtain TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL for all Mentor and
Linaro toolchains with a few $(subst) calls.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Trailing slashes are going to be declared illegal from FOO_SITE
variables.
But Buildroot internally generates such a variable when using a custom
external toolchain (i.e. BR2_TOOLCHAIN_EXTERNAL_CUSTOM). This is
because TOOLCHAIN_EXTERNAL_SITE is set to
$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))), and $(dir)
leaves a trailing slash.
Fix it using patsubst, just like linux and the bootloaders do.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When ARCH is arm and the hard-floating-point option is on executables
expect to find the dynamic linker at /lib/ld-musl-armhf.so.1 and not
/lib/ld-musl-arm.so.1.
This patch adjusts the logic that creates the symbolic link from the
dynamic linker path to the musl C library (since musl has everything
built into a single file).
[Thomas: tweak the commit log.]
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before this commit, the output of the toolchain-external build steps
looked like this (abbreviated for clarity):
>>> toolchain-external undefined Building
>>> toolchain-external undefined Installing to staging directory
>>> toolchain-external undefined Copying external toolchain sysroot to staging...
>>> toolchain-external undefined Building ext-toolchain wrapper
mkdir -p output/host/usr/bin; cd output/host/usr/bin; for i in ...
/usr/bin/gcc -O2 -Ioutput/host/usr/include -DBR_SYSROOT='...
if test -f output/host/usr/bin/i686-pc-linux-gnu-gdb ; then mkdir -p ...
>>> toolchain-external undefined Fixing libtool files
>>> toolchain-external undefined Installing to target
>>> toolchain-external undefined Copying external toolchain libraries to target...
if test -e output/target/lib/ld-uClibc.so.1; then ln -sf ld-uClibc.so.1 output/target/lib/ld-uClibc.so.0 ; fi
if test -e output/target/lib/ld64-uClibc.so.1; then ln -sf ld64-uClibc.so.1 output/target/lib/ld64-uClibc.so.0 ; fi
All the long lines with conditions and loops in them are not usefull,
so put $(Q) in front of them. The line with mkdir can better be split
on a separate line so the cd stands out more. There are two redundant
semicolons that can be removed. The installation of gdbinit could
use an extra message so the user can see what is going on.
After this commit, the toolchain-external build steps look like this:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Installing to staging directory
>>> toolchain-external undefined Copying external toolchain sysroot to staging...
>>> toolchain-external undefined Building ext-toolchain wrapper
/usr/bin/gcc -O2 -Ioutput/host/usr/include -DBR_SYSROOT='...
>>> toolchain-external undefined Installing gdbinit
>>> toolchain-external undefined Fixing libtool files
>>> toolchain-external undefined Installing to target
>>> toolchain-external undefined Copying external toolchain libraries to target...
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c68c365d29 ("toolchain-external:
remove CS sh2 toolchains") removed the definitions of the
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 and
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009, but did not actually
remove the code that was using those options.
So this commit removes the parts of the code that are currently dead
due to this: the definition of the prefix of those toolchains, the
hashes, and the URLs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit wires up the gcc version dependency mechanism in the
external toolchain backend. To do so, it:
* Changes the definition of all pre-defined external toolchain
profiles to select the appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_*
option.
* For custom external toolchains, provides a visible Config.in
"choice" to select the gcc version used in the external toolchain.
* Adds a new check_gcc_version function, that verifies that the real
gcc version found in the external toolchain matches the one
declared in the Buildroot configuration.
[Thomas: use better sed expression proposed by Yann E. Morin, which
works with more cases.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before commit 5715d2dcf4, the external
toolchain wrapper would not pass its own march/mcpu/mtune flags to the real
compiler if at least one of them was passed on the wrapper command-line.
The mentioned commit intended to remove the passing of an mtune parameter
coming from Buildroot, which was always empty after some other refactoring,
but the changes have the side-effect that march/mcpu is now also passed when
mtune is already given on the command-line. In that case, only mtune should
be passed to the real compiler.
Restore part of the original toolchain wrapper code to check the presence of
mtune on the command-line.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 34f95bf9db (toolchain-external: fix support of uClibc-ng toolchains,
2015-07-13) added the missing ld-uClibc.so.1 dynamic linker symlink that
binaries expect when linked with uClibc-ng. However on 64bit targets the
linker is called ld64-uClibc.so.1. Handle that case as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not
patched specifically for uClibc-ng, so it continues to generate
binaries that expect the dynamic loader to be named ld-uClibc.so.0,
like with the original uClibc.
Therefore, when a uClibc-ng toolchain is used as an external
toolchain, we need to create an additional symbolic link to make
uClibc-ng systems work properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain from the Cavium Networks Octeon SDK provides a sysroot
with library directories lib32, lib32-fp, lib64 and lib64-fp. The -fp
variants are used for processors with hardware floating point unit, such
as the Octeon III variants.
When specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, the toolchain
will use lib32-fp, but currently Buildroot does not accept that pattern.
This patch improves the matching by accepting lib(32|64)?([^/]*)? as lib
directory name.
Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
[ThomasDS: update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas: add comment above the function being modified to illustrate
the various cases we try to handle.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like we do for the internal musl backend. We still see a large number of
build failures with musl, so warn users about it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 1.1.6, the mips softfloat toolchains are merged into the mips
toolchain using multilib. Our external toolchain infrastructure copies
the correct version to the target depending on the BR2_SOFT_FLOAT
option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hashes for all musl toolchains, including the ones that we
currently don't support (arm hf, sh4, x86_64-x32).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For Linaro toolchains, a special post install staging hook is used to
create two symlinks needed for the dynamic loader to find the
libraries. However, the way the link is created prevents a 'make
toolchain-external-reinstall' from succeeding, because the symlink
already exists and points to a directory:
ln -sf . /home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf
ln: '/home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf/.': cannot overwrite directory
This commit adjust the hook to pass the '-n' option so that the link
name is treated as a normal file if it is a symbolic link to a
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This uClibc toolchain does not provide an appropriate uClibc
configuration for Buildroot: missing IPv6, missing nsl stub, missing
program invocation, etc. Therefore, we mark it as broken, waiting for
a new upstream release of a new toolchain.
We keep around the toolchain-external Synopsys code anyway, since it
will most likely be identical for the new toolchain version. However,
we remove all the quirks that were introduced to start work around
issues related to this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We will *always* be missing a hash file for custom external toolchains
that are downloaded.
So, just ignore that failure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.1.6 version of musl-cross fixes the two issues that had been
preventing versions after 1.1.1 being used by buildroot, namely:
- sysroot is enabled again
- kernel headers are included again
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove BR2_INET_IPV6 select for predefined external toolchains.
Remove the (non)IPv6 option prompt since it's now mandatory.
And force the toolchain check now that internal uclibc is always built
with IPv6 support and external non-IPv6 toolchains are disallowed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally we'd deprecate them, but:
1) They don't support IPv6 and it's being removed so it makes no sense.
2) They're based on uClibc 0.9.30-ish which is very old and surely has
package build breakage all over it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need for toolchains or the user to declare largefile support
since it's now mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this change we add pre-built external toolachins for DesignWare ARC
cores. All currently existed flavours are supported:
* ARC 700 and ARC HS cores
* Little- and big-endian configurations
These pre-built tools are built with build scripts available here
(https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/tree/arc-2014.12)
and correspond to arc-2014.12 release of sources.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
The computation of TOOLCHAIN_EXTERNAL_BIN has a special case for
Blackfin, where it's set to
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
instead of $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin for other
architectures.
However, this is actually only true for Analog Devices pre-built
toolchains. Other Blackfin external toolchains (such as ones built by
Buildroot) do not have this special organization.
Therefore, in order to make those non-ADI Blackfin toolchains work, we
need to change the condition from BR2_bfin to testing specifically for
the ADI toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain is AMD64-only so restrict it accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for AMD steamroller optimizations, available in gcc 4.8+ as
bdver3.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These have been deprecated since 2014.02
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchain can also have been generated by Buildroot previously, as
the list that follows demonstrates. Rephrase the paragraph describing what an
external toolchain is as suggested by Thomas Petazzoni, to make it clearer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
