This does not buld because its "configure" requires
that -llzo contains "lzolx_decompress".
"vtun" does not build, evenm if liblzo is available.
The LZO package currently used by buildroot
does not contain ANY reference to "lzolx_decompress"
"vtun" has been upgraded to 3.0.2 and now builds OK,
but is yet to be tested on a target.
The previous patch containing three diffs,
has been broken up into three files.
The second patch fails.
This patch tries to replace a perl script
($(VTUN_DIR)/scripts/vtund.rc.debian)
with a shell script with the same name.
In vtun-3.0.2, vtund.rc.debian is a shell script which is
fairly similar to the shell script provided by the patch.
For now, it has been decided not to replace this shell
script with the script generated by the patch for 2.6
vtun will thus be built with the 3.0.2 vtund.rc.debian.
The start-stop-daemon parameters and other things
in this script may be inappropriate for something based on busybox.
I will leave the decision which script to use,
the 2-6 script or the 3.0.2 script to someone else.
Both files are kept in the directory, but should
be removed once it has been decided what to do
about this script.
Signed-Off by: Ulf Samuelsson <ulf.samuelsson@atmel.com>
This patch updates the AVR32 arch patches for strace 4.5.18 and refreshes all
the other patches so they apply clean.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
git-svn (and git) doesn't handle empty directories, so add .empty files
to those dirs like elsewhere in buildroot.
Those empty directories are normally not a big deal, but the recent changes
to u-boot broke the build.
* When installing pci.ids[.gz] the -D means create all components leading up, using $(@D) does not include the filename, the last directory component is then /usr/share. pci.ids[.gz] is therefore created as /usr/share/misc (misc being the filename). Using $@ fixes this, the directory path is created and the file is installed as /usr/share/misc/pci.ids[.gz] .
* Do not install to the staging dir inside the target install target,
since it has already been done in the staging install target.
* Strip the binaries installed in the target.
* Properly create the target installation stamp.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TARGET_PATH didn't contain $(STAGING_DIR)/usr/bin, which means that
programs installed in $(STAGING_DIR)/usr/bin were not considered for
execution during Buildroot build process. This was a problem with host
automake/autoconf/libtool, which could not be found.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* In toolchain/external-toolchain/ext-tool.mk, copy the contents of
the sysroot directory to the staging dir.
* In package/Makefile.in, add a --sysroot CFLAGS pointing to the
staging dir
* Remove the CFLAGS and LDFLAGS definition from
TARGET_CONFIGURE_OPTS. I haven't investigated exactly why, but with
these options, DirectFB fails to build because it cannot find
PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP, even if DirectFB's Makefile
properly sets -D_GNU_SOURCE.
I have already sent this patch on December, 2nd to the mailing-list,
but got no feedback. So let's commit and see what happens :-)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes parallel build of Samba. The trick is to make proto before
executing a full make.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch bumps Samba version to 3.2.5. In the process Samba now
depends on libiconv. This dependency is needed because Samba wants to use
various formats when talking to the different parts of the system.
Two new patches are introduced, one to double check if BSD functions are
available, and one to skip checking for glibc version. The use unsigned
enum patch could be removed since this can be supplied with a autoconf
variable.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch is mainly for size reduction, removing more than half the
needed footprint.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will install zlib keeping the symlinks. The usage of
$(INSTALL) here did not take into account symbolic links.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds a kconfig option to enable Phonon when configuring Qt.
Phonon is the multimedia API from KDE 4 which has been integrated into
Qt 4.4. For playback under Linux the GStreamer multimedia framework is
used.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
The ARM uClinux BFLT format apparently doesn't support shared libs nor
-fPIC. So let's distinguish between shared and non shared builds by
having split rules for libz.a and libz.so based on BR2_PREFER_STATIC_LIB.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Currently, udev won't start for me, as we've just mounted a new /dev,
which is completely empty, and udevd requires a /dev/null.
This change manually creates the three base device nodes (zero, null
and console) so that udev can start.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
If the udev extras are built without large file support in uClibc,
I get the following error:
build_powerpc/staging_dir/usr/bin/powerpc-linux-uclibc-gcc -c -g -Wall
-pipe -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -Wstrict-prototypes
-Wsign-compare -Wshadow -Wchar-subscripts -Wmissing-declarations
-Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare
-Wmissing-prototypes -Os ext.c -o ext.o
In file included from build_powerpc/staging_dir/usr/include/stdio.h:28,
from ext.c:19:
build_powerpc/staging_dir/usr/include/features.h:382:4: error:
#error It appears you have defined _FILE_OFFSET_BITS=64. Unfortunately,
uClibc was built without large file support enabled.
Although the base udev package builds correctly, the extras pacakges
don't adjust their CFLAGS depending on BR2_LARGEFILE.
This change adds the required CFLAGS modifications to make the
extras build.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
According to udev.mk, the scsi_id package depends on the libvolume_id
library, so add this dependency to Config.mk
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
The configure script tries to find out if enums can be negative, this is not
supported when cross compiling, since it tries to run the binary. This commit
sets the test to yes, i.e. negative enums are possible.
Avahi uses autoconf during ./configure, make sure it is available and used
before building avahi.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
install-strip unconditionally overwrites $(TARGET_DIR)/etc/init.d/ifplugd.*,
so the check in _HOOK_POST_INSTALL is useless.
Fix it by using install-exec and manually stripping the target binaries
instead.
CPUs. It is required by various GStreamer plugins.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Modifications by Thomas Petazzoni:
- Remove the glib2 dependency, which is only necessary to build a few
examples. If glib2 is enabled in the configuration, then we still
depend on it in order to build the examples, but that's just
pedantic, not so useful.
- Remove the oil-bugreport program installed to the target by
install-strip.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ac_cv_path_install override is needed to strip the target binary for
haserl 0.8.0, but it doesn't interact nicely with the shared cache, so
disable the cache for now.
Longer term we should probably forget about install-strip and do the
strip/cleanup/mklibs stuff as a post processing step before the target
filesystem rules are run.
This patch will add needed libraries with $(if ...) syntax. This should ease
readability and make it easy for others to spot where the depencies are added.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch removes -I and -L from ./configure since it breaks cross-compiling.
The inclusion of -I and -L will confuse the host compiler when compiling the
host tools.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds alsa-lib to a dependency for mplayer if it is selected in
kconfig.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will put dependency libraries in a variable and add this to the
dependencies to build mplayer. This is done to ease adding new libraries in the
future.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch disabled ivtv video output, since it does not compile with Linux
kernel 2.6.27 headers.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
The following changes allow for use of a central configure cache
file. This speeds up configuration of packages.
Its use is configurable at the top level (BR2_CONFIG_CACHE - default n).
Old style makefiles can use it if they use the following MACRO in makefiles:
$(AUTO_CONFIGURE_TARGET) see my change to directfb.mk.
New style Autotools.in will use it if you set the global option.
However you can enable the global option and on a per package overrule it by doing
the following: $(PKGNAME)_USE_CONFIG_CACHE = NO see fontconfig.mk for an example
of this.
Finally I have removed a few config variable settings which indicated no CXX compiler
as this is wrong and breaks the build when using this central cache.
Config.in | 8 ++++++++
package/Makefile.autotools.in | 5 ++++-
package/Makefile.in | 28 +++++++++++++++++++++++++++-
package/atk/atk.mk | 2 +-
package/directfb/directfb.mk | 7 +------
package/fontconfig/fontconfig.mk | 3 +++
package/libglib2/libglib2.mk | 2 +-
package/libgtk2/libgtk2.mk | 1 -
8 files changed, 45 insertions(+), 11 deletions(-)
I would appreciate feedback on this change (I have been testing for 2-3 weeks)
But I can never test all cases! If you enable the BR2_CONFIG_CACHE option some
Makefile.autotools.in based packages may now break - I cannot build them all.
In this case you may need to remove config options that are being hardcoded all
over the place (like gtk saying we have 2 CXX compiler) or disable the use
of CONFIG CACHE file like I have done in fontconfig.
I can build all packages required to get WebKit on DirectFB up and running
and it runs fine.
I will try to resolve any issues this creates as fast as I can.
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
The id applet in 1.13.0 only compiles with uclibc < 0.9.30 if the
busybox internal passwd/grp functions are used.
Therefore, automatically enable CONFIG_USE_BB_PWD_GRP if that situation
is detected and warn the user.
Prepare for the merge of audio and video packages. Many packages cannot
properly be assigned to either audio or video, because they have support
for both (libogg, mplayer, vlc).
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Also remove --enable-shared and --enable-static as it's default
and --disable-oggtest and $(DISABLE_NLS) as they are not supported.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
This patch adds a patch to fix bug
https://bugs.freedesktop.org/show_bug.cgi?id=16464 affecting parallel
compilation of fontconfig.
The patch is the one proposed in the bugzilla entry, available at
https://bugs.freedesktop.org/attachment.cgi?id=17294.
Without this patch, the compilation (at BR2_JLEVEL > 1) of fontconfig
sometimes fails with:
In file included from fc-case.c:25:
../src/fcint.h:118:21: error: fcalias.h: No such file or directory
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes two Qtopia build issues, encountered while trying to
use system implementation of zlib, freetype, jpeg and libpng :
* The build process doesn't look in $(STAGING_DIR)/usr/include for
includes and $(STAGING_DIR)/usr/lib. Same problem as the patch
currently floating around adding LDFLAGS to TARGET_CONFIGURE_OPTS,
but as Qtopia doesn't use TARGET_CONFIGURE_OPTS, we need a specific
fix here. So we use the -I and -L options of Qtopia's configure
script.
* The build process doesn't use pkg-config to get the header path for
Freetype headers (located in $(STAGING_DIR)/usr/include/freetype2
and not directly in $(STAGING_DIR)/usr/include/). There was already
a fix for this, consisting in adding $(FREETYPE_DIR)/include to the
-I path of Qtopia's configure. This patch modifies this fix to use
$(STAGING_DIR)/usr/include/freetype2 instead, which looks more
coherent with how all the packages are built (using $(STAGING_DIR)
as the reference to get headers and libraries).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is a new version of a patch already sent several times on
the mailing-list, committed and reverted a few times by Daniel Laird,
due to several imperfections. This version is a new try at finding a
solution that works for everybody. Hopefully it'll work :-)
The original problem is that external toolchain builds failed because
packages couldn't find their dependent libraries at configure time and
could not be linked with them. To fix these two problems, two things
are added:
* The TARGET_LDFLAGS variable was exposed as LDFLAGS at ./configure
time thanks to TARGET_CONFIGURE_OPTS. The TARGET_LDFLAGS variable
contains -L options with the path in the STAGING_DIR for the
libraries. It allows ./configure scripts to properly compile the
small test programs testing whether a dependency is properly
installed.
* The TARGET_CFLAGS contains a new -Wl,--rpath-link option for both
$(STAGING_DIR)/lib and $(STAGING_DIR)/usr/lib. It allows library
depending on other libraries to link properly. The TARGET_CFLAGS is
exposed as CFLAGS in TARGET_CONFIGURE_OPTS.
This new version fixes a problem encountered by hartleys
<hartleys@visionengravers.com> when building the kernel. The problem
was that the -Wl,--rpath-link options were added to LDFLAGS, while
there are options for the C compiler, not the ld linker. Moving them
to CFLAGS seems to fix the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bounce tiff into Autotools.in format.
Did not use install to target as this puts loads of executables into TARGET.
So just copied tiff.so instead.
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Looking into adding a configure cache to the build (like the GIT buildroot version)
This means that freetype needs to know about zlib so make
sure it had it as a dependency.
Also remove install rule for staging as it matches default.
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
The following patch makes the MESSAGE Macro in Makefile.autotools.in
work.
I think it was originally intended to print the messages in bold type
but it doesn't appear to work correctly. This patch should work on all
platforms.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
(Fixed to not continously call tput)
Revert the rpath patch, it looked good up until someone tried
to build a kernel as well. This seems to break as a result.
Will post a new patch soon and see how that goes..
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Apply the patch I posted some time ago that fixes
rpath issues with external toolchains.
Has been tested by users of buildroot and feedback looks good.
Signed-off-by: Thomas Petazzoni
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
This patch will create the autotools-stamps directory early in the build
process, thus making it possible for non Makefile.autotools.in packages to use
this directory to hold stamp files.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds gettext dependency to make: rule instead of the TARGETS
variable if locale is selected. Just to conform with common syntax.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch makes sure gettext and libintl are selected if locale support is
enabled. Gettext must also be compiled before make so appropriate headers are
available to make.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
libpng used to have the 'png' Makefile alias, which some packages used
in their dependencies list.
With the move to Makefile.autotools.in this is now gone, so update the
packages to match.
Extend the regexp to match spaces and also tabs to replace the qmake
variables with the proper buildroot values. Also use TARGET_AR and
TARGET_STRIP instead of using TARGET_CROSS and set a variable for
qmake.conf to shorten the command line.
Patch by Markus Heidelberg
When cross compiling, Qt sets PKG_CONFIG in its own configure script to
an empty string. That leads to not using pkg-config. To avoid that, use
the configure option -force-pkg-config. Also set environment variables
for pkg-config defined in TARGET_CONFIGURE_OPTS.
Patch by Markus Heidelberg.
See http://buildroot.uclibc.org/lists/buildroot/2008-October/011324.html
for more details.
Fix matchbox build
This patch fixes various failures in the Matchbox build:
* libmatchbox and matchbox-panel were using a now legacy index()
function, which is not part of every uClibc build nowadays
(depending on the configuration). As this function doesn't exist
anymore in all builds, use strchr() instead, which is the
recommended replacement for index(). Two patches, one for
libmatchbox, one for matchbox-panel, are added to fix this problem.
Closes bug http://bugs.uclibc.org/view.php?id=5484
* Do not override the CFLAGS and LDFLAGS values, they are already set
by TARGET_CONFIGURE_OPTS. It caused build failures.
* Mangle the library paths in the .la file of libmatchbox, after
installation in the staging dir.
It would probably be nice to switch Matchbox over to the new
Makefile.autotools.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rely on the sane default values of Makefile.autotools.in for the
staging and target installs. The immediate benefit is that the target
install will use install-strip instead of install, leading to a quite
nice size reduction in the libraries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the predefined INSTALL_STAGING_OPT and INSTALL_TARGET_OPT
behaviour of Makefile.autotools.in, so that installation on the target
is done using install-strip.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure target of pango had strange characters in it, preventing
compilation to work. Remove them, they just seem to be mistakes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure option --disable-nls is not supported anymore in glib
since version 2.0, see file ChangeLog.pre-2-0 line 544.
Patch by Markus Heidelberg.
PKG_CONFIG_SYSROOT_DIR and friends get set in package/Makefile.in,
so there's no need to set it in the makefiles of the individual
packages as well.
Based on a patch by Markus Heidelberg.
Use one conditional if statement instead of several single "depends on".
Patch by Markus Heidelberg.
Cleaned up trailing white space while we're at it.
As per various email discussions add -rpath-link
to the LDFLAGS.
This definately fixes a few issues for Thomas and myself
Any objections and it can be pulled again.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@...>
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Memstat lists all the processes, executables, and shared
libraries that are using up virtual memory. It's helpful to
see how the shared memory is used and which 'old' libs are
loaded.
Add the liberation fonts package as this can be used
by GTK etc and means you have some useful (free) fonts.
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
Bump up libgtk2 version
The version of libgtk2 currently used doesn't build when built against
DirectFB. The issue has been fixed in a later version of the 2.12.x
series, so let's upgrade to this version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the DirectFB examples package.
This patch adds the DirectFB examples package to Buildroot. It is
largely based on a patch written by Daniel Laird, and available at
http://bugs.uclibc.org/view.php?id=4224. I only made a few adaptations
to get it to work properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Daniel Laird <daniel.j.laird@nxp.com>
SaWMan is a new window manager module for use with DirectFB.
Its main difference to the default module is that it allows one process
to be an application and window manager,
implementing all kinds of diversity,
while SaWMan is only the working horse.
Daniel Laird
This patch will default to linux-generic32, unless a known optimized
architecture is selected.
As of today it will select optimized config for; avr32, ia64, powerpc and
x86_64.
This fixes bug #5344.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Use AutoTools.in to build freetype.
Slight issue with freetype installation to TARGET_DIR.
Doing an install results in far too many files being copied in.
So for now I do what the old makefile did which is copy the .so files
and links manually rather than using a make install.
It also uses the autotools.in additions to not use the generic libtool patch and
use a local one instead.
Daniel Laird
This patch bumps the version to 0.9.8 and refreshes the patch against that
version. Fixes bug #5284.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will use linux-generic32 for all i386 target architectures, which
fixes bug #5274.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-Patch to build against newer kernel headers
( vsftpd-2.0.7-uclibc.patch , based on idea from
http://www.bitshrine.org/gpp/vsftpd-2.0.5-syscall2.patch )
-new basic init script (no config yet)
-Update version (2.0.7)
-openssl fixes
-cleanup makefile deps so it doesn't get built when things
don't change
-force some performance enhancing autoconf options
-run 'installscripts' so findsmb and smbtar are installed
-samba binaires were segfaulting with uclibc 0.9.29
when not using: samba_cv_fpie=no. Force it.
Config.in:
-create configure options for findsmb and smbtar
S91smb:
-create dir (/var/lock/subsys) that is referenced
later in script
-Force some autoconf options so that job control
is turned on.
(Otherwise these checks fail when cross compiling.
And when job control is disabled, bash can't be
the default shell)
This patch puts gettext and libintl before the avahi targets, thus making sure
they exist before avahi targets are built.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds a missing backslash on a line in the middle of the list of
XSERVER_XORG_SERVER_CONF_OPT.
Reported-by: Sebastian Matuschka <Sebastian.Matuschka@gcd-solutions.de>
This patch install with install-strip to the target and uses the default for
installing to staging. Makes the makefile even more compact, and also more
correct with using install-strip to get proper stripping of the installed
library.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch corrects the commit r23467 and replaces uclibc with
xserver_xorg-server in LXDOOM_DEPENDENCIES.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
lxdoom depends on a X11 server to be built, this patch will only show lxdoom if
a X11 server is selected and add xserver_xorg-server to the dependency list.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will let the user install the Doom shareware WAD file if PrBoom is
selected.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds a new package PrBoom. PrBoom is a Doom and Doom ][ client which
uses the SDL library for graphics, sound and network. It also supports OpenGL,
but this has not been enabled in this package since few embedded platforms
support OpenGL.
PrBoom allows you to play the good old game on newer hardware. It even supports
higher resolution and better rendring, while still keeping the old style alive.
http://prboom.sourceforge.net/
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch splits the installation of the shareware WAD file into a separate
package. The wad file will also be installed into /usr/share/games/doom
directory, since the client will search this directory when starting.
The Makefile rule has also been altered to use tools defined by Buildroot to
extract and install the wad file. The package is also multiple project safe
now.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds a new package SDL_net. SDL_net is a small, low-level,
cross-platform network library, that can be used with the Simple DirectMedia
Layer library (SDL).
http://www.libsdl.org/projects/SDL_net/
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch converts building of OpenSSH to use Makefile.autotools.in instead
and in the same process bump to latest upstream version 5.1p1.
The openssh.path is also cleaned up a bit to reflect the new release, i.e. some
of the patch is already applied/fixed upstream.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch converts building of OpenSSL to use Makefile.autotools.in and bumps
the version to 0.9.8g. The patches are updated to reflect this version upgrade.
A kconfig option for adding the OpenSSL engines is also added.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Minor fix for Makefile.autotools.in that deals with the packages
that use AUTOCONF to regenerate configure etc.
(my mistake to start with)
Daniel Laird
1. I added a HOOK_POST_EXTRACT previously so that I could cope with the
bad libxml2 package. This required me to remove some dead patches
(.rej) files after I extracted the package, the issue is that the
EXTRACT target runs patch-kernel.sh to patch the ltmain.sh.
It then finds some.rej files and bombs out.
I have altered the sequence so that the HOOK_POST_EXTRACT target runs
before the make target that patches libtool to deal with this.
2.) I have added a $(PKG)_LIBTOOL_PATCH variable. This is defaulted to
YES however if you override it in the package makefile to NO then the
ltmain.sh file will not be patched automatically but only if you have
added your own patches.
This is necessary for freetype 2.3.7 as it cannot use the
buildroot-libtool patch.
I am using this patch for building a set of packages, however it
is not a complete set of packages so await feedback of issues (if any)
Daniel Laird
This patch will install iptables with the install-strip command, and also use
/usr/lib as target for the filter libraries.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch will let aumix depend on an installed file on the target root file
system instead of touched file.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch adds libupnp package to Buildroot. libupnp provides developers
with an API that are compliant with version 1.0 of the Universal Plug and
Play Device Architecture Specification.
http://pupnp.sourceforge.net/
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
This patch bumps the version to 0.9.4 and converts the oprofile.mk to use
Makefile.autotools.in. Patches against 0.9.3 are removed since they are no
longer needed and a new patch for 0.9.4 is added.
Building for all architectures should now also be possible.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Fathi Boudra <fboudra@gmail.com>
