sngrep currently doesn't really use wchar support anyways, and when
checking for wchar support, it's checking the host systems ncurses
libraries.
Remove support for ncurses wchar until it's used in sngrep, and remove
the patches used to fix ncurses wchar detection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since [1], NONLS is added to LSHW_CFLAGS even for glibc based toolchain.
Previously it was not the case since BR2_ENABLE_LOCALE is always
selected for glibc based toolchain.
With NONLS, config.h try to redefine two Intl function (textdomain and
bindtextdomain) that are used by glibc internally.
This break the build with the following error:
sysroot/usr/include/libintl.h:82:52: error: expected unqualified-id before 'throw'
extern char *textdomain (const char *__domainname) __THROW;
The NONLS mode is really for cases where the C library does not provide
*any* gettext implementation, as would be the case with uClibc without
intl stubs enabled.
But in the context of Buildroot, all C libraries provide a gettext
implementation. It might be full-featured or minimal, but it always
exists.
So, remove NONLS from CFLAGS to avoid the build issue with glibc
toolchains.
Build tested with a uClibc toolchain without locale enabled.
Fixes:
http://autobuild.buildroot.net/results/9bf/9bf5437b4348ea8077013b80a51ce05fa328247d
[1] 3acd9f845d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bugtracker is intended to be used for bug reports only, so clarify
it's not meant to be used for "any problem".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pulseaudio configure script autodetects the presence of
bluez 4.x and 5.x packages on the system and will exclude the
bluetooth-related modules in their absence.
This commit ensures that bluez5_utils, if selected, are installed
before pulseaudio. The same already happens for bluez_utils (4.x).
Signed-off-by: Calin Crisan <ccrisan at gmail dot com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsanitizer in gcc fails to build on PowerPC with gcc versions 4.9
and 5.x used in conjunction with glibc 2.25, with the following error:
../../../../gcc-host/libsanitizer/asan/asan_linux.cc: In function 'bool __asan::AsanInterceptsSignal(int)':
../../../../gcc-host/libsanitizer/asan/asan_linux.cc:222:20: error: 'SIGSEGV' was not declared in this scope
return signum == SIGSEGV && common_flags()->handle_segv;
This commit adds a patch that has been submitted to upstream gcc
(https://patchwork.ozlabs.org/patch/725596/) but not merged. The patch
is no longer needed with gcc 6.x and later because the code has been
reworked.
Fixes Buildroot bug #10061
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Linux kernel patch to solve a build failure with
the arcturus_ucp1020_defconfig with gcc 6.x:
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
The patch is upstream in Linux, and can be dropped when
arcturus_ucp1020_defconfig is updated to use a new Linux kernel
version.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it can be interesting to call back into buildroot from a
post-build/image script (E.G. make printvars or similar). For this to work
correctly with out-of-tree builds we need to pass O= to make, but this is
currently not available in the environment of post-build/image scripts.
In concept, O could be derrived from BUILD_DIR (E.G. by stripping /build),
but directly exporting O is cleaner.
O= cannot be exported globally as it interferes with various build systems,
so instead add it to EXTRA_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vcdbg utility is linked to a few libraries, which so far were all
provided by the rpi-userland package.
But a not-so-recent bump of rpi-firmware pulled in a vcdbg that is
linked to an additional library, which is not privided by rpi-userland,
so we must install it.
Reported-by: cluelessperson on #buildroot
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps the strace package to 4.18 upstream version.
Patch 0001-nios2-arch_regs-fix-nios2_sp_ptr-definition.patch has been
removed because it is part of 4.18.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current test fails because of a legacy option, renamed during the
recent ext overhaul.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-10688 - n LibTIFF 4.0.8, there is a assertion abort in the
TIFFWriteDirectoryTagCheckedLong8Array function in tif_dirwrite.c. A
crafted input will lead to a remote denial of service attack.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-7506 - Possible buffer overflow via invalid monitor
configurations.
For more details, see:
https://marc.info/?l=oss-security&m=150001782924095
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove Python2 only dependency as the package is compatible
with Python3.
Add a dot at the end of the help text.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7529 - Nginx versions since 0.5.6 up to and including 1.13.2
are vulnerable to integer overflow vulnerability in nginx range filter
module resulting into leak of potentially sensitive information triggered by
specially crafted request.
For more details, see:
http://mailman.nginx.org/pipermail/nginx-announce/2017/000200.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000381 - The c-ares function ares_parse_naptr_reply(), which
is used for parsing NAPTR responses, could be triggered to read memory
outside of the given input buffer if the passed in DNS response packet was
crafted in a particular way. This patch checks that there is enough data
for the required elements of an NAPTR record (2 int16, 3 bytes for string
lengths) before processing a record.
See https://nodejs.org/en/blog/release/v8.1.4/
[Peter: add CVE info]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-11103:
All versions of Samba from 4.0.0 onwards using embedded Heimdal
Kerberos are vulnerable to a man-in-the-middle attack impersonating
a trusted server, who may gain elevated access to the domain by
returning malicious replication or authorization data.
Samba binaries built against MIT Kerberos are not vulnerable.
https://www.samba.org/samba/history/samba-4.5.12.html
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patches 0003 & 0004, applied upstream.
Fixes the following security issues:
CVE-2017-7244 - The _pcre32_xclass function in pcre_xclass.c in libpcre1 in
PCRE 8.40 allows remote attackers to cause a denial of service (invalid
memory read) via a crafted file.
CVE-2017-7245 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 4) or possibly have unspecified
other impact via a crafted file.
CVE-2017-7246 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 268) or possibly have unspecified
other impact via a crafted file.
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change on PYTHONPATH for Python 2.x has revealed a missing
dependency in the python-twisted package. The incremental Python
module is listed in both setup_requires and install_requires, so we
must depend on both its target *and* host variants.
Fixes:
http://autobuild.buildroot.net/results/386bf87abba550b5477d5e15e57981b8c3cef8d6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The email address of Sagaert Johan is bouncing. Remove his DEVELOPERS entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/
inside the PYTHON_PATH variable, which gets used to define PYTHONPATH,
passed to the host Python interpreter when building/installing target
packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
Making this change allows to fix the python-cffi related build
failures:
http://autobuild.buildroot.net/results/a9af84f2d845ee25e2b7d8b92aef485112b46060/
(python-cryptography)
http://autobuild.buildroot.net/results/b017c4f6b4d45c0afbf06a80dbd3f2ebe5d49d20/
(python-pynacl)
http://autobuild.buildroot.net/results/25144ea191ad46d851b31d3a2f0ef939f215494b/
(python-smbus-cffi)
This change has been verified with the following defconfig that
enables a lot of Python packages:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.05-834-gb595627.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_ALSAAUDIO=y
BR2_PACKAGE_PYTHON_ARROW=y
BR2_PACKAGE_PYTHON_ATTRS=y
BR2_PACKAGE_PYTHON_AUTOBAHN=y
BR2_PACKAGE_PYTHON_BITSTRING=y
BR2_PACKAGE_PYTHON_BOTTLE=y
BR2_PACKAGE_PYTHON_CAN=y
BR2_PACKAGE_PYTHON_CBOR=y
BR2_PACKAGE_PYTHON_CHARDET=y
BR2_PACKAGE_PYTHON_CHEETAH=y
BR2_PACKAGE_PYTHON_CHERRYPY=y
BR2_PACKAGE_PYTHON_CONFIGOBJ=y
BR2_PACKAGE_PYTHON_CONFIGSHELL_FB=y
BR2_PACKAGE_PYTHON_CRC16=y
BR2_PACKAGE_PYTHON_CRCMOD=y
BR2_PACKAGE_PYTHON_CSSSELECT=y
BR2_PACKAGE_PYTHON_CSSUTILS=y
BR2_PACKAGE_PYTHON_DAEMON=y
BR2_PACKAGE_PYTHON_DIALOG=y
BR2_PACKAGE_PYTHON_DICTTOXML=y
BR2_PACKAGE_PYTHON_DJANGO=y
BR2_PACKAGE_PYTHON_DOCOPT=y
BR2_PACKAGE_PYTHON_DPKT=y
BR2_PACKAGE_PYTHON_ECDSA=y
BR2_PACKAGE_PYTHON_ENUM=y
BR2_PACKAGE_PYTHON_FLASK_BABEL=y
BR2_PACKAGE_PYTHON_FLASK_JSONRPC=y
BR2_PACKAGE_PYTHON_FLASK_LOGIN=y
BR2_PACKAGE_PYTHON_FLUP=y
BR2_PACKAGE_PYTHON_GOBJECT=y
BR2_PACKAGE_PYTHON_GUNICORN=y
BR2_PACKAGE_PYTHON_HTML5LIB=y
BR2_PACKAGE_PYTHON_HTTPLIB2=y
BR2_PACKAGE_PYTHON_HUMANIZE=y
BR2_PACKAGE_PYTHON_ID3=y
BR2_PACKAGE_PYTHON_INIPARSE=y
BR2_PACKAGE_PYTHON_IOWAIT=y
BR2_PACKAGE_PYTHON_IPADDR=y
BR2_PACKAGE_PYTHON_IPY=y
BR2_PACKAGE_PYTHON_IPYTHON=y
BR2_PACKAGE_PYTHON_JSON_SCHEMA_VALIDATOR=y
BR2_PACKAGE_PYTHON_KEYRING=y
BR2_PACKAGE_PYTHON_LIBCONFIG=y
BR2_PACKAGE_PYTHON_LMDB=y
BR2_PACKAGE_PYTHON_LXML=y
BR2_PACKAGE_PYTHON_MAD=y
BR2_PACKAGE_PYTHON_MARKDOWN=y
BR2_PACKAGE_PYTHON_MELD3=y
BR2_PACKAGE_PYTHON_MISTUNE=y
BR2_PACKAGE_PYTHON_MSGPACK=y
BR2_PACKAGE_PYTHON_MUTAGEN=y
BR2_PACKAGE_PYTHON_MWSCRAPE=y
BR2_PACKAGE_PYTHON_NETADDR=y
BR2_PACKAGE_PYTHON_NETIFACES=y
BR2_PACKAGE_PYTHON_NFC=y
BR2_PACKAGE_PYTHON_NUMPY=y
BR2_PACKAGE_PYTHON_PAHO_MQTT=y
BR2_PACKAGE_PYTHON_PAM=y
BR2_PACKAGE_PYTHON_PARAMIKO=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_POSIX_IPC=y
BR2_PACKAGE_PYTHON_PSUTIL=y
BR2_PACKAGE_PYTHON_PUDB=y
BR2_PACKAGE_PYTHON_PYCLI=y
BR2_PACKAGE_PYTHON_PYCPARSER=y
BR2_PACKAGE_PYTHON_PYELFTOOLS=y
BR2_PACKAGE_PYTHON_PYFTPDLIB=y
BR2_PACKAGE_PYTHON_PYGAME=y
BR2_PACKAGE_PYTHON_PYGAME_IMAGE=y
BR2_PACKAGE_PYTHON_PYGAME_EXAMPLES=y
BR2_PACKAGE_PYTHON_PYGAME_FONT=y
BR2_PACKAGE_PYTHON_PYGAME_MIXER=y
BR2_PACKAGE_PYTHON_PYINOTIFY=y
BR2_PACKAGE_PYTHON_PYLIBFTDI=y
BR2_PACKAGE_PYTHON_PYMYSQL=y
BR2_PACKAGE_PYTHON_PYPARTED=y
BR2_PACKAGE_PYTHON_PYPCAP=y
BR2_PACKAGE_PYTHON_PYQRCODE=y
BR2_PACKAGE_PYTHON_PYRATEMP=y
BR2_PACKAGE_PYTHON_PYRO=y
BR2_PACKAGE_PYTHON_PYROUTE2=y
BR2_PACKAGE_PYTHON_PYSENDFILE=y
BR2_PACKAGE_PYTHON_PYSMB=y
BR2_PACKAGE_PYTHON_PYSNMP_APPS=y
BR2_PACKAGE_PYTHON_PYSNMP_MIBS=y
BR2_PACKAGE_PYTHON_PYSOCKS=y
BR2_PACKAGE_PYTHON_PYTABLEWRITER=y
BR2_PACKAGE_PYTHON_PYTRIE=y
BR2_PACKAGE_PYTHON_PYUSB=y
BR2_PACKAGE_PYTHON_PYXB=y
BR2_PACKAGE_PYTHON_PYZMQ=y
BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT=y
BR2_PACKAGE_PYTHON_RPI_GPIO=y
BR2_PACKAGE_PYTHON_RTSLIB_FB=y
BR2_PACKAGE_PYTHON_SDNOTIFY=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SETPROCTITLE=y
BR2_PACKAGE_PYTHON_SH=y
BR2_PACKAGE_PYTHON_SHUTILWHICH=y
BR2_PACKAGE_PYTHON_SIMPLEJSON=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_PYTHON_SOCKETIO=y
BR2_PACKAGE_PYTHON_SORTEDCONTAINERS=y
BR2_PACKAGE_PYTHON_SPIDEV=y
BR2_PACKAGE_PYTHON_THRIFT=y
BR2_PACKAGE_PYTHON_TOMAKO=y
BR2_PACKAGE_PYTHON_TREQ=y
BR2_PACKAGE_PYTHON_U_MSGPACK=y
BR2_PACKAGE_PYTHON_UBJSON=y
BR2_PACKAGE_PYTHON_UJSON=y
BR2_PACKAGE_PYTHON_URLLIB3=y
BR2_PACKAGE_PYTHON_VERSIONTOOLS=y
BR2_PACKAGE_PYTHON_WATCHDOG=y
BR2_PACKAGE_PYTHON_WEB2PY=y
BR2_PACKAGE_PYTHON_WEBPY=y
BR2_PACKAGE_PYTHON_WHOOSH=y
BR2_PACKAGE_PYTHON_WS4PY=y
BR2_PACKAGE_PYTHON_WSACCEL=y
BR2_PACKAGE_PYTHON_XLUTILS=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-treq package lists the incremental Python module as part of
its setup_requires variable in setup.py, so it must be added as a host
dependency of the python-treq package to avoid build failures.
So far, this issue wasn't visible because python-treq selects
python-twisted, which itself selects the target python-incremental
package. Because python-incremental was before python-treq in the
alphabetic ordering, it was always built before python-treq. And due
to the fact that PYTHONPATH currently contains the directory with
target Python modules, the host Python interpreter was happily using
the target python-incremental while running on the host. But as we are
going to clean up PYTHONPATH, this will no longer be the case, and
hence python-treq needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A host variant of the python-incremental package will be needed for
the python-treq package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-json-schema-validator does not need versiontools on the target,
but only on the host, as it's listed in setup_requires in setup.py.
This was not noticed so far because host Python interpreter is started
with a PYTHONPATH that contains a directory with target Python
packages, so versiontools was found there. But as we are about to fix
PYTHONPATH to no longer include such a directory,
python-json-schema-validator would fail due to versiontools being
missed on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It will be needed by python-json-schema-validator.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-u-msgpack can use setuptools instead of distutils, and
using setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyro can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyasn can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is copyright information in the top level README file. Use this
file as the license file which will be included by the `legal-info`
build rule.
Signed-off-by: Ben Leinweber <bleinweber@spaceflight.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though PyPI says the license is BSD, GitHub repo has an MIT license
file since April 2017 and upstream setup.py was also fixed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change setup type to setuptools and use proper license file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
