Our default mdev.conf file in package/busybox has lines like:
pcm.* root:audio 660 =snd/
event[0-9]+ root:root 640 =input/
that are used to create the device is the appropriate /dev
subdirectory. However, this feature requires
CONFIG_FEATURE_MDEV_RENAME to be enabled, otherwise mdev complains
with:
mdev: bad line 25
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmbus is an open source M-bus (Meter-Bus) library.
The Meter-Bus is a standard for reading out meter data from electricity
meters, heat meters, gas meters, etc.
[Peter: minor whitespace fixes]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Reviewed-by: Luca Ceresoli<luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After bumping to 3.7.0, the valgrind-3.6.1-configure-support-linux-3.patch is
no longer necessary since it was added upstream. The
valgrind-3.7.0-compiler-check.patch patch is added to fix a compiler version
check issue (patch taken from the upstream Subversion repository). The
valgrind-3.7.0-fix-ccache-support.patch is added to fix the build process when
ccache is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though it's most commonly used on desktops, this piece of software
also works well on embedded devices.
The package file only resolved mandatory dependencies. Things like
iptables and dnsmasq are only required if 'shared' connections are used,
and have hence not been made hard prerequisites.
There are probably too many i18n related files installed to the target.
That might need some more tweaking.
[Peter: fix Kconfig dependencies, add execinfo patch, fix libgcrypt-config
path, uClibc build fix]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CPPFLAGS have to be augmented, so configure finds the correct include
dir, and the patch needs to be tweaked to make the binary link to
libnl-3 instead of libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current git version copes well with libnl-3, so use this one until
the next official release is made.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CFLAGS have to be augmented for the include dir and a small patch
will make the binary link to libnl-3 and libnl-genl-3 instead of libnl
and libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CFLAGS have to be augmented for the include dir and a small patch
will make the binary link to libnl-3 and libnl-genl-3 instead of libnl
and libnl-gen.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This newer version splits the library code into libnl, libnl-route,
libnl-genl and libnl-nf, each individually selectable via pkgconfig.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's an issue with the cgit installation, which causes
git.buildroot.net/buildroot (no trailing /) requests to return stale
results. The osuosl people are looking into it, but until then atleast
use the the correct URL on the website link.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When built with --enable-xprint, xman needs libXaw8 (rather than libXaw7),
which we don't have in buildroot.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a library for sending email through SMTP.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
install defaults to mode 0755, not 0644, so explicitly pass mode to
ensure .js files aren't made executable.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A lot of open source Javascript libraries can be interesting to use on
embedded systems, so add a specific Javascript menu and the probably most
well known library of them all, jQuery.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The issue with cppglue.cxx is still present in 4.2.1, but the previous
workaround had to be extended to allow builds with C++ support.
Similary, the ICU check didn't handle cross compilation.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build libeXosip2 after openssl if enabled, and explicitly disable support
for it otherwise, so configure doesn't end up looking for it on host.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes lib/lib64 issue when building on OpenSUSE.
Reported-by: Guillaume Gardet <guillaume.gardet@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libffi is a new requirement for libglib, and as libglib has to be built
for the host as well, libffi has to follow.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following error:
Variable 'includedir' not defined in '/home/daniel/buildroot/output/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/lib/pkgconfig/libffi.pc'
Also, use $(SED) instead of 'sed -i'.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
