The project at https://github.com/linux4sam/at91bootstrap was until
now releasing 3.x versions, which were packaged using
boot/at91bootstrap3/ in Buildroot. Microchip has now started a new
branch of at91bootstrap, called 4.x, which will only support the
following devices: sam9x60, sama5d2, sama5d3, sama5d4, sama7g5. A
number of older devices from Microchip will only be supported by the
existing 3.x series.
Therefore, we cannot simply remove support for the 3.x series, and
allow using only the 4.x series.
So what this commit does is extend the boot/at91bootstrap3 package to
support building both 3.x and 4.x versions. In detail, this implies:
* Having the BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION symbol point to
the latest 4.x version. Indeed, we want
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION to really point to the
latest upstream version, even if that means potential breakage for
users. Users who want to use a fixed version of at91bootstrap
should anyway not be using
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION.
* Introduce BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X for users who
would like to use the latest 3.x series.
* Adjust the installation logic, as images to install are now in
build/binaries/*.bin instead of binaries/*.bin. In order to not
have to differentiate 3.x and 4.x, we simply use $(wildcard ...) to
expand the list of files to install.
* To make it clear that boot/at91bootstrap3 supports both 3.x and
4.x, we also update the prompt of the package.
at911bootstrap does not carry a license file; so far we were using
main.c as the license file, as it carries the license blurb. Now that we
have a known alternate version, we would need a per-version hash for
that file. However, this is a bit too cumbersome to handle, so just drop
using main.c as the license file. When upstream introduces a proper
license file, we can revisit the situation.
Update the two defconfigs that were using the upstream 3.9.3 version;
all other defconfigs are using custom tarballs or custom git trees.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: while this patch is based on previous work by Eugen, it was
reworked quite significantly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop main.c as license file, explain why
- update the two defconfigs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump kernel to version 5.10.30-ti-r3.
- Bump U-Boot to version 2021.04.
Add mdev to the beaglebone_defconfig. This gives us automatic USB support,
as the omap2plus kernel has most drivers as modules.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for the Globalscale EspressoBin Ultra, which is
an evolution of the EspressoBin family. Same SoC and switchcore, more
Ethernet ports, including one PoE PD port.
Tested-by: Atallah Amine <amine_atallah@outlook.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This introduces a configuration for the SBSA reference machine under
QEMU that is intended for developing and testing firmware. It consists
of ATF that load EDK2 as BL33 which in turn will load GRUB2.
Included with the board files is a minimal kernel configuration, almost
identical to that of board/qemu/aarch64-virt/linux.config. The main
difference is the addition of ACPI which is preferred over DTB for
booting an UEFI system.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now based on 5.10.33 (from 5.10.1).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump kernel to version 5.12.2.
- Bump U-Boot to version 2021.04.
While at it, switch U-Boot to the Kconfig build system and add some more
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump kernel to version 5.12.2.
- Bump U-Boot to version 2021.04.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit extends the beaglev_defconfig and its documentation to
build the low-level firmware, and to explain how to reflash it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr: use typoed-name for beaglev-ddrlnit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit introduces support for the RISC-V based BeagleV platform,
which uses a Starfive JH7100.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: use: eval $(make printvars)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump kernel to version 5.11.16.
We remove the hardcoded ttyAMA0 and rely on the firmware to discover our
console. This enables serial console on systems, which do not have an Arm
pl011 UART.
We switch to GPT disklabel and discover our root filesystem using its
PARTLABEL. This enables booting from more media, such as HDD, SD card or
USB.
We update the readme, which hinted that ACPI was mandatory. This is not
strictly the case as we can also boot with a dtb and/or a U-Boot based
firmware, with no ACPI. While at it, mention EBBR, SystemReady and explain
how to build and use a U-Boot-based qemu firmware.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
NXP i.MX 8M Plus based SOM with 2GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-plus-som/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To latest v2020.10 rev (e05b6d68)
-> added 8MP A1 silicon support
-> fixed 8MP HAB support
-> added display support for all 8M platforms
- Bump ATF to boundary-imx_5.4.70_2.3.0
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- based upon NXP 5.4.70_2.3.0 release
- include stable until 5.4.110
- 8MP GA support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y_1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y_1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y-1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.10.y-1.0.0 versions.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux and headers version to 5.11
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:
https://www.acmesystems.it/acqua
It is available in both 256 MiB and 512 MiB versions, hence the two
defconfig files. These configs build microSD card images with:
- AT91Bootstrap 3
- Linux 5.4.107
- default buildroot packages (uClibc, Busybox)
The device tree blob comes from Acme Systems:
https://github.com/AcmeSystems/dts-archive
It is licensed under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable the OpenSSL library to enable some OP-TEE tests that relies on
it.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump TF-A to version 2.4.
- Bump u-boot to version 2021.01.
- Bump kernel to version 5.11.3.
We switch TF-A to a single FIP image. Thanks to this, TF-A does not need to
use semihosting to load the various BL* anymore (but U-Boot still does).
Update the readme.txt accordingly.
We switch to a u-boot image for the ramdisk. This removes the need to
update the fdt chosen node manually in the bootcmd.
While at it, we drop the generation of the kernel dtb, which we do not use.
In this config, we are indeed using the dtb generated on-the-fly by qemu
and amended by TF-A.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Board used custom Kernel but did not specify
custom headers. This broke the build when
Linux 5.11 was added in d2fe9c6.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1089053980
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit 8efc5dce98 added an overlay but
forgot to add it to the related defconfig.
Fixes: missing overlay data in image
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a 32-bit equivalent configuration of ppc64-e5500 board.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have defconfigs for quite a few friendlyarm boards, but the
naming for the defconfigs for those boards is inconsistent: some
start with 'friendlyarm_' while others don't.
Although the number of boards starting with 'friendlyarm_' is
less than those which do not, we still choose to rename the
boards so all have the 'friendlyarm_' prefix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Chakra Divi <chakra@openedev.com>
Cc: Davide Viti <zinosat@gmail.com>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the gitlab build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1019385566/
HOSTCC scripts/extract-cert
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to the other stm32mp157-based boards, except that we use the
multi_v7 defconfig for ease of maintenance.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New U-Boot versions need Python 3.x for pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/1006924823
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so get rid of
the hardcoded root=/dev/mmcblk1p2. The old vendor U-Boot unfortunately does
not have GPT support, so stick to MBR and use the legacy
root=PARTUUID=<disksignature>-<partition> format and set a fixed disk
signature, similar to how it was done for orangepi-r1 in commit 34cce93adb
(configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch that pins mmc indexes was not accepted to mainline kernel. Drop that
patch and switch to GPT to use partition labels. For GPT the name of the
partition in genimage.cfg is used as the label for that partition. Note
that the default GPT partition table location conflicts with the SPL
location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to use the official linux kernel v5.10 instead of an
out-of-tree kernel, and use the official U-Boot v2021.01 as the
bootloader. Provide two configuration files of genimage for different
boot flows:
- Boot from SD card (default)
- Boot from SPI flash
A boot script is generated to automatically boot the distro.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To match minnowboard_max_defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly enable PCI support in the kernel after commit eb01d42a77785 (PCI:
consolidate PCI config entry in drivers/pci) and change to GPT partitions /
root=PARTLABEL to find the rootfs instead of hardcoding /dev/mmcblk2p2 as
the mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4).
This has the additional advantage that the same image will work when written
to a USB drive instead of a microsd.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc
driver has been switched to asynchronous probe. As a result, mmc indexes
can be shuffled breaking board boot. Add patch that pins mmc indexes to
their original ordered values.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for Sinovoip's Banana Pi
M1+. It is mostly based on bananapro_defconfig
but with appropriate device tree and minor tweaks:
- apply bananapi-m1-plus device tree in linux
- apply bananapi_m1_plus defconfig for uboot
- apply patch for OOB IRQs on new device tree
- update device tree name in boot.cmd, genimage.cfg
- update symlink for BRCM driver in rootfs_overlay
- overall clean-up of the config
Tested on BPI-M1+ V1_1.
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
