This commit fixes various build failures caused by the host-perl
series.
Currently, the variables PERL and PERL5LIB are available only during
the configure step of host-intltool, but they are also needed when
running host-intltool, in all packages that depend on
host-intltool. Without them, host-intltool cannot work as it doesn't
find the libxml-parser-perl module installed in
$(HOST_DIR)/usr/lib/perl.
This commit therefore makes the PERL and PERL5LIB variables global, so
that all packages can access them.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
yaml-cpp is a YAML parser and emitter in C++ matching
the YAML 1.2 spec.
https://code.google.com/p/yaml-cpp/
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the udev initscript trigger in a coherent way, i.e. first set
subsystems, then device and then let the whole thing settle.
Otherwise for usb_modeswitch udev rules they never kick in since the
storage aspect (device) gets claimed first and the switch ignored.
Also set the settle timeout to a smaller value than the default
120 seconds to avoid stalling too much.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qt5connectivity selects the bluez-utils package but the dependencies are
not fully propagated so someone could do a static build, then select the
qt5connectivity package causing bluez-utils being auto-selected, which
is disabled for static builds, and then obtain a build failure like this
one:
checking for dlopen in -ldl... no
configure: error: dynamic linking loader is required
Fixes:
http://autobuild.buildroot.net/results/96d/96d8297be0b731da138b1e2aafb851061aee3c40/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When saving (aka updating) the configuration file of a kconfig package,
a subsequent call to "make" would rebuild the package, even though the
configuration did not actually change.
It took quite a while to understand why. But the reason is so simple and
obvious, when you think about it:
- $(@D)/.config depends on the config file $(BUSYBOX_CONFIG_FILE)
- busybox-update-config then copies $(@D)/.config back to the config
file $(BUSYBOX_CONFIG_FILE)
- so the config file is newer than $(@D)/.config
So, in the next run, pkg-kconfig believes that it has to rebuild
busybox. Bummer... :-/
So, the fix is very trivial, and just requires asking "cp" to preserve
timestamps, so the dependency does not kick in at the next run.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libpcap headers have moved from /usr/include to /usr/include/pcap,
although /usr/include/pcap.h still exists for backwards-compatibility
(but is a stub that simply includes pcap/pcap.h).
The ngrep package tries to find bpf.h based on the include statements in
pcap.h. If we point ngrep to /usr/include/pcap.h, bpf.h will not be
found and the associated functionality will not work.
The fix is to pass the new include path to the ngrep configure step.
Fixes bug #7370
[1] https://bugs.busybox.net/show_bug.cgi?id=7370
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependencies on the comment.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The phrasing is a bit off, also there are no WiFi dongles that need this
AFAIK.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's used by 50-default-udev.rules for input-class devices.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's used by 50-default-udev.rules for input-class devices.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It leads to ugly runtime warnings, see:
http://patchwork.ozlabs.org/patch/386215/
It's also required for xtables-addons.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use --disable-all-programs configure option instead of sed base
patching of Makefile.am in case no util-linux binaries are selected.
Suggested by Thomas Petazzoni ([1]).
With this patch applied the following libs are no longer build by default:
util-linux-2.25.1/.libs/libfdisk.a
util-linux-2.25.1/.libs/libsmartcols.a
util-linux-2.25.1/.libs/libsmartcols.so.1.1.0
[1] http://lists.busybox.net/pipermail/buildroot/2014-October/109818.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libplayer is using BR2_nios, but it should be BR2_nios2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_arm10 has been removed in commit
d60489a6e5 ("arch: remove BR2_arm10t"),
so there is no point in keeping a reference to it in the ffmpeg
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the imx-vpu package needs the firmware to be loaded into the VPU it
makes sense to have the latter package selected by default.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added an option for the ntpd application to support pps inputs.
Signed-off-by: Bryan Brinsko <bryan.brinsko@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added pps-tools package to add support to the ntpd for a
pps source (requires timepps.h from pps-tools as part of ntpd
build).
[Thomas:
- Use $(TARGET_MAKE_ENV) at install time.
- Alphabetic ordering in package/Config.in, noticed by Jerzy
Grzegorek.]
Signed-off-by: Bryan Brinsko <bryan.brinsko@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add hash file and set eprefix to / otherwise when busybox is around
we've got duplicate tar applications (/bin/tar for busybox, /usr/bin/tar
for full-blown) normally making busybox still win in directory search.
[Thomas: slightly improve the comment that explains why we pass
--exec-prefix.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A lot of packages ignored BR2_ENABLE_DEBUG. This patch simplifies the handling of
this option by adding the corresponding configure option to the global Makefile
for target packages.
For host packages --disable-debug is added to the global Makefile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
Fix mysql support.
Add hash file.
Forcibly disable automatic db support when it's not selected.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can not bump to the latest cset, because it breaks weston. So we
add a patch to backport upstream fixes for musl:
http://lists.busybox.net/pipermail/buildroot/2014-October/109309.htmlhttps://github.com/raspberrypi/userland/pull/201
[Thomas: adjust commit log as suggested by Yann E. Morin.]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
www.cdrkit.org looks dead, the cdrkit archive always downloads from the
buildroot.org mirror. This patch points the downloader to the Debian
archive site.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to Romain Naour, Baruch Siach and Thomas Petazzoni, I've
solved the build issues in certain cases for bandwidthd.
The issue was that libpcap and libpng would depend on other libraries
and upon testing for pcap/libpng the tests would fail due to not
being able to find the other libraries.
Bandwidthd's configure script now uses pkg-config for libpng
and pcap-config for libpcap. pcap-config's path is specified
in configure's arguments.
Some other tweaks have been made including the layout and flow
of configure.ac is a bit more logical, and the handling of postgres
and sqlite has been tweaked. Finally, the test for X.Org has been
removed.
[Thomas: re-add Nathaniel SoB line, which was misplaced in the commit
log, and therefore dropped when applying the patch.]
Fixes: http://autobuild.buildroot.org/results/eb4/eb48acec37a7fd1714b267b105816bf0053d40e9/build-end.log
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AVAHI_INSTALL_AUTOIPD was unconditionally installing
S05avahi-setup.sh to /etc/init.d/, even in systemd
configurations. Therefore, this commit:
* Moves the installation of S05avahi-setup.sh to a separate variable
called AVAHI_INSTALL_AUTOIPD_INIT_SYSV.
* Makes sure to use 'install -D' and a full destination path when
installing S05avahi-setup.sh.
* Moves the definition of AVAHI_INSTALL_AUTOIPD inside the
BR2_PACKAGE_AVAHI_AUTOIPD conditional, so that both the variable
definition and its addition to AVAHI_POST_INSTALL_TARGET_HOOKS are
enclosed in the conditional.
* Moves the S50avahi-daemon installation from AVAHI_INSTALL_INIT_SYSV
to AVAHI_INSTALL_DAEMON_INIT_SYSV.
* Uses 'install -D' to install S50avahi-daemon.
* Adds a AVAHI_INSTALL_INIT_SYSV definition which calls both
AVAHI_INSTALL_AUTOIPD_INIT_SYSV and AVAHI_INSTALL_DAEMON_INIT_SYSV.
Note: in a systemd configuration, there is no provision to do what
S05avahi-setup.sh is doing for sysv init configurations. Maybe this is
something that our systemd people should have a look at.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In AVAHI_INSTALL_INIT_SYSTEMD, since we're using 'install -D' to
install /usr/lib/tmpfiles.d/avahi.conf in $(TARGET_DIR), there's no
need to have a 'mkdir -p' before that, since 'install -D' creates the
directories as needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The indentation for commands should be made with tabs, not spaces, so
fix that up in AVAHI_INSTALL_INIT_SYSTEMD.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using the buildroot-provided avahi-daemon.service file, bootup never
finishes, because multi-user.target is waiting for avahi-daemon to exit,
which is caused by "Type=oneshot" (in avahi-daemon.service).
Upstream's systemd files get already installed to /lib/systemd.
They're not an exact copy of S50avahi-daemon, but work flawlessly,
so use these units:
* avahi-daemon.service, auto-enabled (ln -fs in AVAHI_INSTALL_INIT_SYSTEMD)
* avahi-daemon.socket,
not auto-enabled, but a dependency of avahi-daemon.service
* avahi-dnsconfd.service, auto-enabled
[Thomas: use simpler absolute paths for the symbolic links instead of
relative paths. Suggested by Maxime Hadjinlian.]
Signed-off-by: André Erdmann <dywi@mailerd.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While libpciaccess is part of the X libraries, it does not
depend upon X11 or any other X library.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These flags are already defined in pkg-autotools.mk.
There is no need to have them twice.
[Thomas: restore += instead of = in the opus package, as suggested by
Yann E. Morin.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This installs the 'modplug123' command line tool to play tracker music
files (MOD, S3M, XM etc.) using libmodplug.
The modplugtools package can build two players: modplugplay that plays
directly via OSS and modplug123 that plays via libao. Since modplugplay
won't work without OSS support and modern kernels are likely to have no
OSS or OSS emulation, we build only modplug123.
If you have a system without ALSA support for some reason, you can
still use modplug123 to play over OSS via libao.
http://modplug-xmms.sourceforge.net/
[Thomas: add missing Config.in comment about the C++ dependency.]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
`localstatedir` is a common autoconf variable like prefix and sysconfdir. At
this time 25 autotools and one generic package uses this Makefile variable. 22
of the autotools packages use --localstatedir=/var, the remaining use custom
settings.
Setting `localstatedir` to /var is consistent with the Filesystem Hierarchy
Standard (FHS). So it's time to move it as a common definition in the
autotools infrastructure.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by Maarten ter Huurne on the mailing list, the install of the
asound.h headers overwrite the one from the toolchains or kernel
headers.
Since tinyals's header is only a subset of the 'real' asound.h, there is
no need to overwrite it.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update initscript for the /usr/sbin -> /usr/bin change which is the
default installation directory now that it's using autotools infra.
Also add hash file.
Make the initscript use tabs instead of spaces.
Make the config file installation conditional.
Now with optional gnutls support for HTTPS.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this version fixes the issue with big endian,
see https://github.com/arsv/perl-cross/issues/10
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
intltool uses this package,
and we don't want that it depends on host-perl,
but on system perl
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also switch to xz tarball to avoid cached tarball hash conflict.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the refactoring of the case conversion macros in dd5e620ac, the
macro became even harder to understand. Improve this explanation a
little so future generations can make sense of what we're doing here.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchains don't always install the executable in /usr/bin -
God knows why. So check in a few more places.
We can use make's $(wildcard ...) here, because the variable only gets
expanded when the install step is executed, and by that time the
STAGING_DIR has already been installed.
Probably fixes most getent autobuilder errors, at least if fixes
http://autobuild.buildroot.net/results/615b9d17f713b4a53192efb00188560a76b9efa3/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of the configure cache symbols changed name because some routines
were moved to libreplace instead of samba itself.
So change the naming for those affected so that samba can work nicely
again with some configuration directives (like interfaces = X).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides Gtk+ 3.0, a graphical toolkit.
[Peter: fix Config.in deps, ensure atleast 1 backend, remove redundant info]
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Eric: added backend support, use of pkgconf for host-libgtk3]
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides Freedesktop Hicolor icon theme.
This is the fallback icon theme, which only creates the standard
directory structure for storing icons of third-party applications (i.e.
the ones not available in usual icon themes).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-autotools.mk fix --sysconfdir to "/etc". This patch restore
--sysconfdir to its default value (/etc/ssh)
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now with change of BR2_PREFER_STATIC_LIB meaning to "do not build dynamic libs
and build statically linked applications" it's possible to disable support of
shared libs in uClibc as well as builting of shared libc libs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc on PowerPC forgot to define some PTRACE_* definitions. Even
though the Buildroot uClibc package has a fix for this, it doesn't fix
external uClibc toolchains that are not patched. Therefore this commit
adds a patch to Valgrind to workaround the problem by defining
PTRACE_GETSIGINFO to the appropriate value on PowerPC when it's not
defined by the C library.
Fixes:
http://autobuild.buildroot.org/results/bc6/bc6be9aa1ad39201a1045a65c0c3eb1e968371f2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The only package selecting wpa_supplicant is connman, and it is
already depends on BR2_USE_MMU.
Fixes:
http://autobuild.buildroot.org/results/9ac/9ac3c0de573f5266a889f1ceb6d43aa92f715c55/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use BR2_PACKAGE_QEMU_HAS_EMULS, only add SDL_CONFIG once]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Untested for other architectures, so only enabled for known-working ones.
We explicitly disable all features that depends on other packages,
for now. Such features will be added one by one in the next patches.
Features that do not rely on external packages are explicitly enabled
to catch the dependencies on toolchain features early.
[Peter: propagate dependencies from libglib2]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although QEMU has a ./configure script, it is not an autotools-package,
so switch to providing build and install commands, and to using
generic-package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ecryptfs-utils scripts require the 'getent' program to be
installed to find the home directory of users. However, Buildroot
currently never installs this program, and therefore bug #7142 was
reported, explaining that ecryptfs-utils is not working properly.
In normal Linux systems, the getent program is provided by glibc, and
allows to query not only /etc/passwd, but also other NSS databases
such as LDAP and others.
In the context of Buildroot, this gives us several cases:
1/ Internal toolchain
a/ glibc/eglibc. In this case, the getent program is already built
and installed by Buildroot in the staging directory, so the
only thing missing is installing it in the target directory.
b/ uclibc. uClibc provides a simple shell script that emulates the
behavior of getent. It is located in extra/scripts/getent in
the uClibc sources, but is currently never installed.
c/ musl. There seems to be no getent implementation, and musl does
not support NSS.
2/ External toolchain
a/ glibc/eglibc. In several external toolchains that we tested,
there is a pre-built getent binary available in the sysroot,
but Buildroot is not installing it to the target.
b/ uclibc. The getent wrapper script is typically not part of any
external uClibc toolchain.
c/ musl. There is no getent implementation.
This patch proposes to solve this problem by introducing a getent
package, which has the following behavior:
- When the toolchain is glibc based (either internal or external), it
installs the getent program that was built and installed in the
staging directory. This covers cases 1/ a/ and 2/ a/ above.
- When the toolchain is uclibc or musl based, it installs a version
of uclibc's getent wrapper script that is built into the getent
package. This script is unlikely to change over time, so having it
directly built into the package should not cause much issues moving
forward. This covers all other cases above.
This solution allows to install a NSS-capable getent when glibc/eglibc
is used, and otherwise to rely on uClibc's wrapper script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The release is a few years old but the repository is still going, so
uses the SHA1 and uses the github function to download it.
Also, it now needs AUTORECONF.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure that xlib_libXcomposite is build before xserver_xorg-server.
With this defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XLIB_LIBXCOMPOSITE=y
and "make xserver_xorg-server" the package xlib_libXcomposite was ignored.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
am335x-pru-package provides an assembler and program loader for Texas
Instrument's AM335x programmable real-time units.
[Peter: fix typo in patch description]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- add dependency on threads, wchar and dynamic librayr
- add dependency on libiconv when locale support is not enabled
- replace patch hacking includedir by a patch that lets the Makefile
obey to $(DESTDIR)
- remove optional OpenSSL and MySQL support which simply cannot work
due to the usage of AC_CHECK_FILE() in configure.ac, this required
an additional patch to fix the bogus AC_ARG_WITH() calls.
- move from 'Miscellaneous' to 'Libraries' -> 'Other'.
- fixup the licensing information.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual gives this example for using the github macro:
FOO_VERSION = v1.0 # tag or full commit ID
Unfortunately, people copy/pasting this example will face weird make errors,
because it leads the FOO_VERSION variable to end with a space. Similar
problems can happen when testing a version bump or similar, so strip
leading/trailing spaces before the version is used to construct the build
directory path.
Reported-by: Edd Robbins <edd.robbins@gmail.com>
Cc: Edd Robbins <edd.robbins@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc can be built stripped (implemented as link-time option in uClibc).
This could be useful for those who build root fs manually.
In Buildroot there is a global strip stage wich strips most of shared libs
in "target" folder (wexcept kernel modules known to not work properly being
stripped and libpthread required to be non-stripped for correct debugging with
gdb of multi-threaded apps).
So there're few problems with current implementation:
1. uClibc is being stripped 2 times (first on its build stage, second on
global Buildroot strip stage)
2. uClibc libs in "staging" folder are also always stripped except if
"no strip" (BR2_STRIP_none) is explicitly is selected in Buildroot config.
That makes it possible to remote debug uClibc libs on target only if target
rootfs was not stripped (which might not be possible due to huge libs
like Qt)
This patch disables embedded strip in uClibc (still users may modify uClibc
config and explicitly set "DOSTRIP=yes" if really needed).
Interesting that DOSTRIP was not only selected in uClibc config but also was
force set with Buildroot on uClibc configuration step with UCLIBC_STRIP_CONFIG.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Not all our shells do install a pointer to /bin/sh. Besides, between
those that do and multiple ones are enabled, the last one to install
wins the the symlink.
Add a new config choice in the system sub-menu that allows the user to
explicitly select the shell to provide /bin/sh. If busybox is not
enabled, default to using dash, a POSIX shell.
Remove the symlink creation from bash.mk at the same time.
Note: for every shell, we select them, except busybox, on which we
depend, on the assumption that we do not want to force busybox in case
the user decided not to enable it.
[Peter: remove redundant !BR2_PACKAGE_BUSYBOX dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not create a [serial-]getty link if BR2_TARGET_GENERIC_GETTY is not set.
Might be useful for custom setups (rootfs overlay).
[Peter: use BR2_TARGET_GENERIC_GETTY_PORT to match the code below]
Signed-off-by: André Erdmann <dywi@mailerd.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When trying to run a buildroot system configured with
BR2_TARGET_GENERIC_GETTY_PORT="tty1" (x86_64), the boot process hangs
with the following message:
"A start job is running for dev-tty1.device (<time> / 1min 30s)"
Replacing /etc/systemd/system/getty.target.wants/serial-getty@tty1.service
(linking to serial-getty@) with getty@tty1.service (-> getty@) fixes the issue.
This patch adds a check that "detects" the tty type by removing digits at the
end of BR2_TARGET_GENERIC_GETTY_PORT and comparing the resulting base name.
An instance of getty@service gets created if the name matches "tty",
otherwise serial-getty@ gets instantiated (as before).
So, tty1,tty2,... are created as links getty@tty1.service -> getty@,
while ttyS0, ttyAMA0, ... are created as instances of serial-getty@.
[Peter: simplify logic]
Signed-off-by: André Erdmann <dywi@mailerd.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Current setting only allows blackfin to select uclinux as TARGET_OS.
However, some noMMU ARM platforms that using FLAT binary format also need to
select uclinux as TARGET_OS. Fix the dependency.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we don't handle it in sysvinit inittab any longer let's add an
initscript to get things back into plug-and-play shape.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't try to start logging from /etc/inittab because busybox installs a
S01logging script that handles that and can lead to duplicate logging
processes.
Let's handle the logging in each package that provides it since we can
get multiple variants in the future like syslog-ng that have different
initialization routines.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the sunxi-cedarx package version to the latest git
commit, which also provides a better support for ARM EABI, since it
now has a non-EABIhf variant of avheap.so available.
Built tested on ARM EABI and ARM EABIhf.
[Thomas: compared to Spenser's original version, bumped to a newer
version, and dropped support for the demo since it didn't build,
and fixing it isn't trivial]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes shellshock-alike exploits.
Install binary to /bin as all shells should be and add hash file.
[Peter: drop /bin/sh handling as we're going to handle it globally]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hash file and use $(INSTALL) instead of cp for proper mode handling.
[Peter: drop /bin/sh handling as we're going to handle it globally]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.8.2 upmpdcli builds with gcc >= 4.5. This allows compilation
with the CodeSourcery toolchain versions 2011.03 and 2010.09 for the PowerPC
architecture.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the dev days. It is broken for uClibc/musl and
architectures not using mainline gcc, so it has only very limited
usefulness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/7a7/7a70b179f17070d0a0883f71c60030dd7d8a9102/
Didn't see widespread failure because it autoreconfed on its own just
fine if autotools infra was already present.
And didn't work before the automake patch with AUTORECONF=YES because of
an older gtk-doc.m4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update gtk-doc.m4 infra to serial (version) 2.
Some packages start to need/ship with the new version and can't be
properly autoreconf'ed, like kmod 18+.
The file was picked up from kmod-18 itself actually.
[Peter: don't pull in host-pkgconf as it was already needed by v1]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have fixes in the internal toolchain; an external toolchain is most
likely a buildroot-built toolchain anyway, so it will also have the
fix. But we still keep a comment to warn the user for potentially-broken
external toolchains.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was modeled after a similar option for Dropbear.
The utmpx code is automatically disabled when compiling with musl,
to avoid a build error due to WTMPX_FILE being undefined. Note that
musl has an empty utmpx implementation, so no functionality is lost
by not calling it.
[Peter: use positive logic]
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adjusts the S10udev script by:
* Using the --action=add option to udevadm trigger. By default, only
the "change" events are handled by 'udevadm trigger', which means
it doesn't handle all the "device add" events that occured during
the boot time, before eudev was started.
* Adds a call to 'udevadm settle' to make sure we wait for udev to
handle all the events that occured before eudev was started.
Both of these change match what the Ubuntu and Debian udev startup
scripts are doing.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It dates back to the initial libxslt submission, has no documentation and
doesn't seem to be needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needed to build the manual in PDF format if the host doesn't have a fixed
xsltproc.
(by make host-libxsltproc; PATH=output/host/usr/bin:$PATH make manual-pdf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the manual is rendered with the timezone of the user running
the rendering. This timezone can fluctuate, depending on the date, due
to DST (Daylight Saving Time). Currently, the manual is rendered in
either CET or CEST (Central European Time, or its DST variant.)
So, a manual rendered during the summer or the winter would refer to a
non-constant timezone. If the machine and/or user doing the rendering
also changes, there is no guarantee the timezone would still be CET/CEST.
This is not a hard issue, since the user can still deduce the time in
UTC, but is just incoherent.
Just force the timezone to be UTC when doing the rendering of the
manual, so we are not dependent on the machine or user doing the
rendering.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Thomas: the AsciiDoc options we use ensure we get a sane
output of the document. We want that configuration to be applied to
other documents as well.
Up until now, it was implicit that the configuration was applied to
our manual, becasue we only supported document-specific configuration,
and the configuration we had was in our manual dir, so we got to use it.
But now, we can render other documents, especially ones from
br2-external, and we want those to also use the default configuration
from Buildroot, but still be able to provide their own customisation.
So, always add Buildroot's configuration first, if available, before we
append the document's configuration.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a document can specify an output-specific configuration, like
the text output, that hides images references, and formats hyperlinks.
But sometimes it is required that a specific configuration is used for
all the output formats, to always apply the same markup rules in all
documents (like using the [specialwords] section.)
Also look for a file named 'asciidoc.conf' in the document's directory.
If that file exists, add it to the asciidoc options (before the
output-specific config, so the latter takes precedence over the former.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, it is not possible to use $(@D) in documents' hooks, because
there is no actual target file for the copying rule.
So, use the same mechanism as for generic-package.
We do not touch the target file, so it is easy to regenerate the manual
without calling the -clean rule first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like for all the package infrastructures, retrieve the package name and
directory in the front-end macro-variable, rather than everywhere in the
backend macro.
This allows us to clean up the ASCIIDOC macro, by removing all the calls
to $(pkgname) and $(pkgdir), and to UPPERCASE (which made the macro a
bit difficult to read.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GENDOC infrastructure so that it more closely matches the way
we handle the packages infras.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GENDOC infra to its own file, so it is even less tied to our
manual document, so that it is more obvious that GENDOC is an infra like
our packages infras, and 'manual' is a document like we have packages.
Ideally, this new file should better go in docs/ rather than in package/ .
However, docs/ is already full of our website stuff, so adding it in
there would just serve to clutter the website.
So, let's just put alongside the other infrastructures, in package/ .
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use positive logic for ifeq, move ARM handling inside ifeq]
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Qt4 development files are installed on the host, VLC uses
/usr/bin/moc, /usr/bin/uic and /usr/bin/rcc when Qt support is
enabled. However, those host installed versions are not necessarily
compatible with the Qt version used in Buildroot, causes some build
failures.
This commit therefore passes explicit ac_cv_path_MOC, ac_cv_path_RCC
and ac_cv_path_UIC variables to make sure the Qt host tools built by
Buildroot are used.
Note that the VLC configure.ac script uses 'pkg-config
--variable=exec_prefix QtCore' to find the location of such tools, but
this invocation returns /usr. One solution would have been to extend
the pkgconf-01-fix-variable.patch we have against pkgconf to also
cover exec_prefix, but this has more uncertain consequences than just
fixing VLC.
Fixes:
http://autobuild.buildroot.org/results/061/06174eaeb7f2b8a591395e607912ad72623b79e3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove of uclibc and musl patches since they are upstream now.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use X11-style instead of X-style]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to provide consistent behavior, this commit explicits the
optional dependencies of libgeotiff on zlib and jpeg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch to improve the libgeotiff configure script to
use pkg-config to detect libtiff, which allows to properly take into
account dependant libraries such as libz and libjpeg.
As a consequence, we now autoreconf the libgeotiff package, and add
host-pkgconf as a dependency.
Fixes:
http://autobuild.buildroot.org/results/649/6498d6516a412b12d68fa9f6a66172021abadc34/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we switched to a two stage gcc build process, the AVR32
toolchain stopped building. This is because with such an old gcc
version, we cannot use the all-target-libgcc and install-target-libgcc
targets.
Before the two stage gcc, libgcc was only built in gcc-intermediate,
which carried a similar logic. This commit basically restores in
gcc-initial the logic that used to be in gcc-intermediate, which
consists in using the all-target-libcc and install-target-libgcc
targets only for gcc versions others than the AVR32 one.
Using the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE option has a way of
distinguishing the old AVR32 compiler from the other gcc versions is a
bit ugly, but it's what was done in gcc-intermediate before. And since
the AVR32 support is due to go away at some point in the hopefully
near future, we don't care that much.
This will fix the build of the two AVR32 defconfig that have been
constantly failing since switching to the two stage gcc process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 1737af3679 ('botan: limit to
supported CPU architectures') introduced the
BR2_PACKAGE_BOTAN_ARCH_SUPPORTS with a default value, but forgot to
define a type, which leads to a kconfig warning:
package/botan/Config.in:1:warning: config symbol defined without type
This commit fixes that by properly setting the type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Symptoms usually seen are like that:
--->---
Error: operand out of range (128 is not between -128 and 127)
--->---
where range may differ.
Since compiler tries to use jump/branch instructions with the shortest encoding
of offset it's important to calculate required offset properly.
In case of miscalculation by compiler later assembler throws an error because of
inability to encode requested value.
Fixes are taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ulog netfilter target has been deprecated for some time and removed
in kernels >= 3.17.x so limit it to older headers. Fixes:
http://autobuild.buildroot.net/results/9ca/9ca43764c7363f9a00b8a0c7df20a492c00088b5/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
quota strips binaries during installation by default using 'install -s', but
that uses the host strip so doesn't work for cross compilation, and
stripping or not is handled globally in Buildroot during target-finalize, so
disable it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-3634 - invalid priority values between 192 and 1023
(directly or arrived at via overflow wraparound) can propagate through
code causing out-of-bounds access to the f_pmask array within the
'filed' structure by up to 104 bytes past its end.
Switch to vanilla since Debian hasn't handled this yet and add hash
file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the old symlink backup since we don't do uninstalls now.
Make the busybox dependency conditional shorter.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix build error with musl:
- Instead of using the nonstandard pthread_yield call use the standardized
sched_yield.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package is based on an earlier package
proposed by Ayaka in December 2013.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kmod uses certain features not available on older RHEL 5 machines (RedHat
Enterprise Linux). This commit adds two patches to fix that.
Both patches have been proposed upstream, the second one being accepted, the
first rejected with the suggestion to add the patch in Buildroot instead.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc has optional support for backtrace() hence on default
configurations where it's disabled it'll fail.
Add patch to make backtrace support conditional and disable it for
uClibc-based builds since it's mostly for debugging purposes. Fixes:
http://autobuild.buildroot.net/results/325/32523398a8c66a7ac6d3e789332d1b57e090aef1/
Patch status: sent upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 8bec0a1af5
the -Wno-unused-local-typedefs CFLAG in not needed.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove 'default n', since it's the default
- add dependency on !BR2_PREFER_STATIC_LIB since the Makefile always
builds a shared library.
- move from Audio/video applications to Libraries -> Audio.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
More security issues, sigh.
Also fix typo in pl29 patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note: the patch adding the pkgconfig module has been sent upstream [1].
[1] http://sourceforge.net/p/canfestival/mailman/message/32876320/
[Thomas:
- license seems to be only LGPLv2.1+. At least, the specific files
pointed to be GPLv2 carry a LGPLv2.1+ header.
- added thread dependency
- minor rewording here and there.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Claudio Laurita <claudio.laurita@integrazionetotale.it>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erlang uses openssl for all things crypto.
Since there are host Erlang tools that use crypto (such as rebar), we
need to build host-erlang with support for crypto, and thus it shall
depends on openssl.
Suggested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Cc: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
