- Fix CVE-2019-5163: An exploitable denial-of-service vulnerability
exists in the UDPRelay functionality of Shadowsocks-libev 3.3.2. When
utilizing a Stream Cipher and a local_address, arbitrary UDP packets
can cause a FATAL error code path and exit. An attacker can send
arbitrary UDP packets to trigger this vulnerability.
- Fix CVE-2019-5164: An exploitable code execution vulnerability exists
in the ss-manager binary of Shadowsocks-libev 3.3.2. Specially crafted
network packets sent to ss-manager can cause an arbitrary binary to
run, resulting in code execution and privilege escalation. An attacker
can send network packets to trigger this vulnerability.
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hopefully, this should fix the following error on one of the
autobuilders:
png: no [The C/C++ header for libpng (png.h) could not
be found. You may need to install the development
package.]
Fixes:
- http://autobuild.buildroot.org/results/afddcc44b2fb7983244f24542bfae921869e4ab8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gnuradio-runtimeTargets.cmake and gnuradio-pmtTargets.cmake are filled
using CMAKE_INSTALL_PREFIX for INSTALL_INTERFACE.
Since CMAKE_INSTALL_PREFIX, in buildroot, is set to /usr, these files contains
path to host system.
With BR2_COMPILER_PARANOID_UNSAFE_PATH package using gnuradio fails with:
arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-isystem' '/usr/include'
By simply providing 'include', produced .cmake contains:
INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include"
instead of
INTERFACE_INCLUDE_DIRECTORIES "/usr/include"
[Upstream status: https://github.com/gnuradio/gnuradio/pull/3737]
Fix (many) gr-osmosdr build failure:
- http://autobuild.buildroot.net/results/66b76c07f15bb3e6db697c47796ae3dd15ecf4b9/
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-15389: jp2/opj_decompress.c in OpenJPEG through 2.3.1 has a
use-after-free that can be triggered if there is a mix of valid and
invalid files in a directory operated on by the decompressor. Triggering
a double-free may also be possible. This is related to calling
opj_image_destroy twice.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-12762: json-c through 0.14 has an integer overflow and
out-of-bounds write via a large JSON file, as demonstrated by
printbuf_memappend.
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of assimp to 5.0.1, we have build failures on mips64el,
due to relocations being truncated. The issue seems to be quite
similar to the one on m68k coldfire, as both m68k and MIPS have this
-mxgot gcc option to switch to using a GOT that has no size limit (but
causes less efficient code to be produced).
Here as well, the overall relevance of assimp on mips64(el) platforms
being probably very limited, the incentive to search for a better
solution is pretty limited.
Fixes:
http://autobuild.buildroot.net/results/7df487d5117b2ee440a07dbff9cae1b181566748/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On m68k coldfire, we already pass -mxgot, but since the bump to assimp
5.0.1, this is no longer sufficient, and we have failures such as:
/tmp/ccqmJLil.s: Assembler messages:
/tmp/ccqmJLil.s:307948: Error: value -43420 out of range
/tmp/ccqmJLil.s:307985: Error: value -38606 out of range
/tmp/ccqmJLil.s:308010: Error: value -38626 out of range
/tmp/ccqmJLil.s:308056: Error: value -33280 out of range
Since these issues only arise when building with -O2, let's disable
the optimization for this package on m68k. The very relative relevance
of assimp on m68k coldfire makes the research of a better solution not
really useful (for the record, assimp is a "library to import various
well-known 3D model formats in a uniform manner").
Fixes:
http://autobuild.buildroot.net/results/a7d4fb2653b0f1be4d036ee46a44e72da0ed4376/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Our patch
0003-Add-option-to-make-the-rpath-relative-under-a-specif.patch adds
an option --make-rpath-relative, which we use to tweak RPATH of target
binaries.
However, one of the effect of this option is that it drops RPATH
entries if the corresponding directory does not contain a library that
is referenced by a DT_NEEDED entry of the binary.
This unfortunately isn't correct, as RPATH entries are not only used
by the dynamic linker to resolve the location of libraries listed
through DT_NEEDED entries: RPATH entries are also used by dlopen()
when resolving the location of libraries that are loaded at runtime.
Therefore, the removal of RPATH entries that don't correspond to
directories containing libraries referenced by DT_NEEDED entries break
legitimate uses of RPATH for dlopen()ed libraries.
This issue was even pointed out during the review of the upstream pull
request:
https://github.com/NixOS/patchelf/pull/118#discussion_r329660138
This fixes tst-origin uClibc-ng unit test:
https://github.com/wbx-github/uclibc-ng-test/blob/master/test/dlopen/Makefile.in#L25https://github.com/wbx-github/uclibc-ng-test/blob/master/test/dlopen/tst-origin.c#L15
Without this patch:
$ gcc -o toto toto.c -Wl,-rpath,/tmp/test/bar
$ readelf -d toto | grep PATH
0x000000000000000f (RPATH) Library rpath: [/tmp/test/bar]
$ ./output/host/bin/patchelf --debug --make-rpath-relative /tmp/
toto
patching ELF file `toto'
Kernel page size is 4096 bytes
removing directory '/tmp/test/bar' from RPATH because it does not contain needed libs
new rpath is `'
$ readelf -d toto | grep PATH
0x000000000000001d (RUNPATH) Library runpath: []
With the patch applied:
$ gcc -o toto toto.c -Wl,-rpath,/tmp/test/bar
$ readelf -d toto | grep PATH
0x000000000000000f (RPATH) Library rpath: [/tmp/test/bar]
$ ./output/host/bin/patchelf --debug --make-rpath-relative /tmp/ toto
patching ELF file `toto'
Kernel page size is 4096 bytes
keeping relative path of /tmp/test/bar
new rpath is `test/bar'
$ readelf -d toto | grep PATH
0x000000000000001d (RUNPATH) Library runpath: [test/bar]
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we recently stopped testing the x86-64 Sourcery toolchain, it means
we no longer have any x86-64 glibc based toolchain in our
autobuilders. Since this is a pretty common configuration, it makes
sense to test it, which this commit does by adding a config fragment
to use the x86-64 glibc bleeding edge Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This toolchain uses an old gcc 6.2.0 compiler (not even the latest gcc
from the 6.x series), which fails to build the recent Boost
package. Since newer versions of this toolchain are no longer made
publicly available from Mentor Graphics, our only option is to drop
the toolchain.
Fixes:
http://autobuild.buildroot.net/results/10edaed22c15b9d0f7de187085aeebc96e5ebe6c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This toolchain uses an old gcc 6.2.0, and newer versions of the
toolchain are no longer publicly available. This old gcc 6.2.0 causes
build issues of Boost, which are unfixable without updating the
toolchain. As we're about to drop support for this toolchain entirely,
we must stop testing it in our autobuilder infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This bump is needed to fix a build failure with gcc 10:
https://savannah.nongnu.org/support/?func=detailitem&item_id=110186#options
Here is an extract of the bug report:
"It is not a bug to have variables with the same name in different source
files. The bug was the missing keyword "static".
But there was a different bug that was not tolerated by GCC 10. It was
same strange data type conversions in dav_coda.c. The resolution was to
drop coda altogether because there is still fuse which is better suited
anyway.
The new release 1.6.0 should fix all these problems. Please tell me if
there are still problems with GCC 10."
Also update indentation in hash file (two spaces)
Fixes:
- http://autobuild.buildroot.org/results/42beafade6fd31927c8db14bc52110c0fc5b17c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerabilities:
CVE-2020-12695: The Open Connectivity Foundation UPnP specification before
2020-04-17 does not forbid the acceptance of a subscription request with a
delivery URL on a different network segment than the fully qualified
event-subscription URL, aka the CallStranger issue.
For details, see the advisory:
https://w1.fi/security/2020-1/upnp-subscribe-misbehavior-wps-ap.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 26e37cef16, we started using
__WORDSIZE to get the size of longs on the given architecture, in
order to support all CPU architectures.
Unfortunately, __WORDSIZE is not enabled in musl, so in
19bd089004, we switched to using
LONG_BIT instead of __WORDSIZE.
However, LONG_BIT is not readily available on glibc, you need
_XOPEN_SOURCE to be defined, which was done in
a34e7f88f6.
However, in a34e7f88f6, _XOPEN_SOURCE
was just defined, with no specific value. This caused the build to
break again on uClibc-ng and older glibcs, because clock_gettime() and
CLOCK_MONOTONIC were no longer defined. In both uClibc-ng and glibc,
CLOCK_MONOTONIC is only defined if __USE_POSIX199309 is defined. It
turns out that simply defining _XOPEN_SOURCE with no value does not
lead to __USE_POSIX199309 being defined in uClibc-ng and old glibcs,
while it is defined in newer glibcs.
The difference comes from the following snippet of code, which is
present in recent enough glibc's <feature.h> but not uClibc-ng's or
older glibc's <feature.h>:
/* If none of the ANSI/POSIX macros are defined, or if _DEFAULT_SOURCE
is defined, use POSIX.1-2008 (or another version depending on
_XOPEN_SOURCE). */
So the fact that we are defining _DEFAULT_SOURCE makes it assume that
we're using POSIX 2008.09, which obviously includes POSIX 1993.09.
Due to the lack of this code snippet, uClibc-ng <features.h> only
enables:
!defined _POSIX_SOURCE && !defined _POSIX_C_SOURCE)
but not:
So we need an _XOPEN_SOURCE level of at least 500 for POSIX 1993.09
definitions to be available.
This is confirmed by the feature_test_macros man page, which states:
_XOPEN_SOURCE < 500
_POSIX_C_SOURCE is defined with the value 2.
500 <= _XOPEN_SOURCE < 600
_POSIX_C_SOURCE is defined with the value 199506L.
When this is fixed, another issue arises with older glibc toolchains
(such as Sourcery ARM), where fd_set is no longer defined. Inded, with
POSIX-1.2001 being enabled, we need to include <sys/select.h> to
access the fd_set definition and friends (see man fd_set for details).
This commit was tested with two glibc toolchains (recent and old), one
uClibc-ng toolchain and one musl toolchain.
Fixes:
http://autobuild.buildroot.net/results/e20f9474fc0217036faa6561df33fa983466ddfe/
(uClibc-ng)
http://autobuild.buildroot.net/results/b5d944389fc96ef2c5e0608fe4ac34149e5f9739/
(glibc)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building on a host that has no name specified for the used group in
/etc/group the script in install step will fail due to missing group name.
CMake Error at CMakeLists.txt:80 (message):
Learning server module group failed: id: cannot find name for group ID 8000
The patch was taken from upstream and modified manually because of merge
conflicts.
Fixes:
http://autobuild.buildroot.net/results/f197ca1def9dc1292e1e784757f2da9d95484431/
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As Thomas said:
> In this sort of situation, we generally don't add any legacy
> handling. Indeed, since the feature is now mandatory... the
> default behavior will always be OK.
> People who could be annoyed are people who had this feature
> disabled... which is now always enabled. But the legacy handling
> will anyway not help those people.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ftdipp is not needed since version 0.1 and
3df577b706
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- argp is no more used;
- UDEV dependency is now optional
Fix:
- http://autobuild.buildroot.org/results/f3f3cc216ae42bb8a8925b0df7c1a3cc79b027d7
/home/buildroot/autobuild/instance-1/output-1/build/openfpgaloader-849e5751e06d4d00f323205d5f02ee01f9f59a61/src/spiFlash.cpp:
In member function 'void SPIFlash::jtag_write_read(uint8_t, uint8_t*, uint8_t*, uint16_t)':
/home/buildroot/autobuild/instance-1/output-1/build/openfpgaloader-849e5751e06d4d00f323205d5f02ee01f9f59a61/src/spiFlash.cpp:92:43:
error: variable-sized object 'jtx' may not be initialized
uint8_t jtx[xfer_len] = {reverseByte(cmd)};
^
and
src/gowin.cpp:73:11: error: 'runtime_error' is not a member of 'std'
throw std::runtime_error("both write-flash and write-sram can't be set");
^
src/gowin.cpp:81:10: error: 'runtime_error' is not a member of 'std'
throw std::runtime_error("incompatible file format");
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr:
- don't add a sub-option for udev; directly rely on udev being avail
- fix conflict after 1ca0077d91
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no debug profile on cargo. The available profiles are: dev
(enabled by default), release, test and bench.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issue:
CVE-2020-15564: Missing alignment check in VCPUOP_register_vcpu_info
For further details, see the advisory:
https://xenbits.xenproject.org/xsa/advisory-327.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Modeled after similar python packages.
However, this one is picky, and throws an exception when it
detects that it is not running on a Raspberry Pi. So we just
catch that exception and check this is what we expect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Christian Stewart <christian@paral.in>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Although the patch makes the package build OK, it fails at runtime
when the module is imported, because of missing symbols:
ImportError: /usr/lib/python3.8/site-packages/RPi/_GPIO.cpython-38-aarch64-linux-gnu.so: undefined symbol: high
Fix that by making sure the symbols are declared once, but only once.
Fixes: #13166
Reported-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new version fixes, amongst many other things, CVE-2020-8231
(https://curl.haxx.se/docs/CVE-2020-8231.html). See the full changelog
on https://curl.haxx.se/changes.html#7_72_0 .
Also drop the 4 patches, that have all been released upstream.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openfpgaloader is written in C++, so the dependency on C++ is not
inherited from libftdipp1.
Drop the confusing comment.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
hash extension can't be disabled since version 7.4.0 and
bf34442581
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
--with-libxml-dir has been dropped since version 7.4.0 and
29d1b7fd52
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
FFI support in php has been added with commit
e16f05c0f0, it depends on dynamic library
otherwise the build will fail on:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/5.5.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ext/ffi/ffi.o: in function `zim_FFI_cdef':
ffi.c:(.text+0xe78): undefined reference to `DL_LOAD'
Fixes:
- http://autobuild.buildroot.org/results/3380b7b6777d1c5fcb53c855b003466fa3bf2079
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
CVE-2020-14367: Insecure writing of pidfile
-------------------------------------------
When chronyd is configured to save the pidfile in a directory where the
chrony user has write permissions (e.g. /var/run/chrony - the default
since chrony-3.4), an attacker that compromised the chrony user account
could create a symbolic link at the location of the pidfile to make
chronyd starting with root privileges follow the symlink and write its
process ID to a file for which the chrony user doesn't have write
permissions, causing a denial of service, or data loss.
This issue was reported by Matthias Gerstner of SUSE.
For further details, see the oss-security posting:
https://www.openwall.com/lists/oss-security/2020/08/21/1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-numpy is an optional dependency since
545c1a1d3a
This dependency will raise the following build failure if python-numpy
is found on the host:
aarch64_be-linux-gnu-g++: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/lib/python3/dist-packages/numpy/core/include'
because mjpg-streamer uses the python executable to retrieve the include
directory:
-- Found PythonLibs: /home/peko/autobuild/instance-0/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/lib/libpython3.8.so (found version "3.8.5")
-- Found PythonInterp: /usr/bin/python3.5 (found version "3.5.3")
-- Found NUMPY: /usr/lib/python3/dist-packages/numpy/core/include
So disable python filter as well as cpp example while at it
Fixes:
- http://autobuild.buildroot.org/results/e6795fa8ed5d8514b3e10ea1135afb31eab22b7e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
