Adds support for the at91sam9g20-ek board to the flasher.sh script.
Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a required component to complete the configuration. It also makes sense
to add ubifs so that this board can be flashed with the board/atmel/flasher.sh
script.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support to the flasher.sh script for the at91sam9260-ek board which
complements the existing at91sam9260eknf_defconfig.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This improve the reproducible build.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mention the libunwind dependency as being needed for 'strace
-k' in the Config.in help text, as suggested by Thomas De
Schampheleire.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Include brcmfmac43455 firmware for the rpi3 b+
Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Jens Maus <mail@jens-maus.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Include BCM4345C0.hcd for the rpi3 b+
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rebase on master, use make foreach loop instead of shell for
loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: use make foreach loop instead of shell for loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.14.29 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: adjusted on top of Yann E. Morin changes to use a tarball
instead of a git clone.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.
See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove double "only" noticed by Carlos
- fix typo packaged -> package noticed by Romain
- fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of using the install of sam-ba under host/opt directly, use the symlink
created in host/bin. The side effect of doing this instead allows the correct
sam-ba binary to be used based on the host arch being 32 bit or 64 bit.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump at91sam9260ek, at91sam9g20, at91sam9g45m10ek, and at91sam9rlek to
at91bootstrap 3.8.10.
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump sama5d3xek to linux4sam_5.8. The 3 foundation components have their tags
changed (AT91Bootstrap, U-Boot, Linux kernel). This requires bumping the kernel
header version and u-boot dtc as well.
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We cannot simply select BR2_PACKAGE_LLVM, we need to take into account
all its dependencies. BR2_PACKAGE_LLVM_ARCH_SUPPORTS was already taken
into account, but not the other dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <a class="moz-txt-link-rfc2396E" href="mailto:thomas.petazzoni@bootlin.com"><thomas.petazzoni@bootlin.com></a></pre>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LLVM uses std::shared_future, which until gcc 7.x isn't available on
architectures that don't provide lock-free atomics, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64735.
Buildroot already has a BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option to
handle such a case, so simply add this new dependency to LLVM. It will
make sure LLVM doesn't get built on ARMv5 platforms using a gcc older
than 7.x.
Fixes:
http://autobuild.buildroot.net/results/ada497f6a8d20fa1a9adb2b17a138d7b726a6cdc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the internal PCRE library of PHP is used, it tries to use a JIT
engine, which is only available on some architectures.
However, the mechanism used to disable JIT has changed in recent PHP
versions, and it now has a proper --without-pcre-jit option. Switch
over to that to properly disable JIT on unsupported platforms.
It has been tested to fix the build of PHP on ARC and Microblaze.
Fixes:
http://autobuild.buildroot.net/results/e1359fcad7bc57e3c5a7ecc37abaa2cf6a6a9ffa/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since c8ef0c03b0 (download: put most of the infra in dl-wrapper), the
backend for local files is now named after the scheme, which is 'file'
for a local file.
>From the same commit on, the directory part and the basename are now
passed separately, to let the backend reconstruct the full path when it
needs to do so, which is the case for the 'file' backend too.
Finaly, ff559846fd (support/download: Add support to pass options
directly to downloaders) introduced a nasty error, as it made use of
"${@}" when calling its internal function. Revert that mess now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the _LICENSE and _LICENSE_FILES variables, that were mistakenly
created with PYTHON_JSONMODELS instead of PYTHON_YIELDFROM
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can drop 0001-Fix-build-with-Linux-kernel-headers-v4.15.patch as it
has been merged upstream, as of commit
a5457d3a1f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but upstream has now tagged the release, so use the
tag instead of the sha1.
https://github.com/webpy/webpy/issues/449
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kexec works fine on aarch64, so allow selecting it on that architecture.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_POSTGRESQL option depends on BR2_USE_MMU, so the
Config.in comment about the dynamic library dependency should only be
displayed if the BR2_USE_MMU requirement is met.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes
http://autobuild.buildroot.net/results/734/7342b25f01d60cafc4a5422a5a1c282629f361c5/
$(dir does not strip last path separator and the wget wrapper adds a '/'
between the -u argument and the filename when it reconstructs the URL,
leading us to have two slashes before the filename when accessing the
upstream location.
Most upstream servers ignores this, but not all - Leading to download issues
from pypi.
Notice: As pointed out by Arnout, we cannot simply use $(PKG)_SITE here as
_PATCH and _EXTRA_DOWNLOADS may contain full URLs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit "6d938bcb52 download: git: introduce cache feature" introduced a
typo that makes the tarball to contain files without the package
basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 ./file
Historically, all tarballs are generated with the basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 good-a238b1dfcd825d47d834af3c5223417c8411d90d/file
The hashes in the tree were calculated with the basename.
In the most common scenario, after the download ends the tarball is
generated, the hash mismatches and the download mechanism falls back to
use the tarball from http://sources.buildroot.net .
The problem can be reproduced by forcing the download of any git package
PKG that has a hash file to check against:
$ make defconfig
$ ./utils/config --set-str BR2_BACKUP_SITE ""
$ BR2_DL_DIR=$(mktemp -d) make PKG-dirclean PKG-source
Fix the typo so the basename is really added to the files, that was
clearly the intention of the code.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only one of the two can be selected (they are conflicting virtual
packages) so testing against a single 'y' is enough.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: add sunxi-mali and sunxi-mali-mainline in a single patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Setting EGLFS_DEVICE_INTEGRATION at the end of qmake.conf like is done
by commit 0c219ddb8a doesn't work correctly: it has to be set before the
include(../common/linux_device_post.conf)
Instead of appending to the file, change it into a qmake.conf.in
template file that contains a placeholder for the
EGLFS_DEVICE_INTEGRATION assignment and update it with sed. Since the
sed always has to be executed, this removes the need for a separate
QT5BASE_CONFIGURE_QMAKE_CONFIG definition.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: simplify the replacement, move sunxi-mali support to a
separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external packages call pg_config to determine the installed PostgreSQL
version. Add this output to Buildroots own pg_config, so these packages
correctly compile.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From the changelog:
2018-02-28 0.39
* Fixed a security issue with the form module (tx Orange Tsai)
* Fixed a security issue with the db module (tx Adrián Brav and Orange Tsai)
2016-07-08 0.38
..
* Fixed a potential remote exeution risk in `reparam` (tx Adrián Brav)
License files are still not included on pypi, so continue to use the git
repo. Upstream has unfortunately not tagged 0.39, so use the latest commit
on the 0.39 branch. A request to fix this has been submitted:
https://github.com/webpy/webpy/issues/449
0.39 now uses setuptools, so change the _SETUP_TYPE.
Add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
webpy uses hashlib for session handling, so ensure it is available:
web/session.py: import hashlib
web/session.py: sha1 = hashlib.sha1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream post-3.14.0 patch to fix build issue related to missing fips.h
header.
For more details, see:
https://github.com/wolfSSL/wolfssl/issues/1415
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides LLVM support for Mesa3D, enabling llvmpipe
software rasterizer if Gallium swrast is selected.
In case Gallium r600 is selected, llvm AMDGPU backend is built.
Having llvm installed also enables radeonsi Gallium driver, but
it is not provided with this patch as it hasn't been tested.
It uses llvm-config (host variant) installed in STAGING_DIR/usr/bin
to get LLVM libraries. Assuming that LLVM version 5.0.1 is installed,
llvm-config --libs will output -lLLVM-5.0.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The AMDGPU backend provides ISA code generation for AMD GPU's,
starting with the R600 family up until the current GCN families.
It should not be confused with the AMDGPU Linux kernel DRM driver.
For more info: https://llvm.org/docs/AMDGPUUsage.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.
In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.
It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.
More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369
The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.
More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.
If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:
- llvm-config --shared mode outputs static (even if LLVM is built as
one shared library) which leads to link issues with libgallium.
- llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
-lLLVMPasses,etc instead of the single shared library containing
all LLVM components (-lLLVM-5.0)
Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.
Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.
As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.
Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.
The main options needed to cross-compile LLVM are the following ones:
LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- add dependency on thread and C++ and update the Config.in comment
accordingly.
- make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
so that it isn't disabled on architectures where LLVM is anyway not
supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new column in the HTML output containing the
current version of a package in Buildroot. As such, it isn't terribly
useful, but combined with the latest upstream version added in a
follow-up commit, it will become very useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the following options to the pkg-stats-new script:
-n, to specify a number of packages to parse instead of all packages
-p, to specify a list of packages (comma-separated) to parse instead
of all packages
These options are basically only useful when debugging/developing
this script, but they are very useful, because the script is rather
slow to run completely with all 2000+ packages, especially once
upstream versions will be fetched from release-monitoring.org.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
