This package uses the 'msub' instruction which is available only in
mips32 and mips64 ISAs.
[Thomas: replicate the new dependency to the comment.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: rewrap Config.in help text, and use proper format for wchar
comment according to the Buildroot manual.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: keep a normal 'config' instead of 'menuconfig' for mutt.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes build issue when python3 is enabled, and host python2
interpreter is not available.
Fixes:
http://autobuild.buildroot.net/results/01f/01f886a073439c0639ed93e596b68bcadf1a5824/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Omniorb build-system requires python2 interpreter.
By default, it looks for python program, which may fallback on the system
python interpreter in case python is disabled and python3 is enabled.
So, this patch enforces the python interpreter to python2 built by
Buildroot.
Fixes:
http://autobuild.buildroot.org/results/b4f/b4f3a2602ba0224ac3253c4bf6ed87ec045df772/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linaro has started to release ARM big endian toolchains, so we
integrate this toolchain in the external toolchain logic of
Buildroot. Since ARM big endian is probably going to be a lot more
uncommon than ARM little endian, we will only support one version at a
time of this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The information "To use this toolchain, you must disable soft float
usage." which was visible in the help text of Linaro toolchains is no
longer useful, since those toolchains are only visible when the ARM
EABIhf ABI is selected, which by design is not compatible with
soft-float.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As Samuel said:
In Python, None is a singleton, and it is recommended to use "is" or
"is not" for testing them [1].
[1] http://legacy.python.org/dev/peps/pep-0008/#programming-recommendations
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop obsolete/applied patches. Refresh the rest, and add sequence numbers.
Add a patch fixing build against uClibc when UCLIBC_HAS_LONG_DOUBLE_MATH is
missing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fswebcam doesn't play nicely with static build as it doesn't track its
indirect dependencies in link time. Fixing this requires tracking all indirect
optional dependencies, which is tedious and error prone. Just disable static
build.
This build failure didn't show on the autobuilder for some reason.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Nios-II Sourcery external toolchain (the only Nios-II we currently
support) exports broken kernel headers. In particular, these kernels should
be exported using the "headers_install" rule which applies a set of fixes
on the kernel headers so they are suitable for userspace usage.
In order to fix this, add a post-install hook to perform the header fixes
ourselves. The result is equivalent to apply the "headers_install" rule.
Fixes:
http://autobuild.buildroot.net/results/c32/c32ad4bac5f651502e551f7733f702afaa0e742a/
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some magic numbers obtained with trial-and-error and successive
iterations, to eventually get a nice graph.
[Thomas: remove excessive spaces in expressions.]
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Al packages depend on 'toolchain'. Currently, 'graph-depends' graphs this
dependency. The resulting graph is thus cluttered with less-than-useful
information.
Instead, do not graph the 'toolchain' dependency for any package, save
for the fake 'all' package. The graph is now a bit more readable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the complete dependency chain of a package is used to
generate the dependency graph. When this dependency chain is long,
the generated graph becomes almost unreadable.
However, it is often sufficient to get the first few levels of
dependency of a package.
Add a new variable BR2_GRAPH_DEPTH, that the user can set to limit
the depth of the dependency list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a crude, ad-hoc parsing of argv[].
This is a limiting factor to adding new options.
Use argparse instead, and introduce a single argument for now:
--package, -p PACKAGE
In the (near) future, we'll be able to add more option arguments,
such as depth-limiting for big graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Variables should be prefixed with BR_ when they are not user-facing.
As a side effect, the new variable is prettier than the previous one. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump raspberrypi_defconfig to use the latest revision from the stable
rpi-3.10.y branch, which is based on v3.10.36.
Bump the kernel headers used for the toolchain at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Of utmost importance, this bump allows to overclock the RPi to even
higher frequencies: ARM > 1200MHz, core > 600MHz, RAM > 600MHz. :-)
To be used with caution, of course! :-)
Fixes and enhancements for:
- clocks : allow higher overclocks
- audio : PCM channel expansion/conversion
- video : stutter on streams without b-frames, choice of scaling /kernel/
- camera : padding-removal, new YUV and BGR modes
- decoder: timestamps fixes, frames interval tracking
- encoder: misc jpeg encoding fixes, save inline motion vectors
- display: don't require EDID on HDMI
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If BR2_PACKAGE_OPUS is selected then vlc will be built with support for
opus passing "--enable-opus" option to the configure script. But when
the configure script checks for the opus library it also checks for the
ogg library at the same time, so if only opus has been installed and not
ogg, then it will fail with an error message like this one:
checking for OPUS... no
configure: error: Library ogg opus needed for opus was not found
Fixes:
http://autobuild.buildroot.net/results/4da/4da8e7cfb35c351e5d623835118512248d331d16/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix typo in the patch: BR2_aarch64 -> BR2_aarch64.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building RTAI userspace applications requires having the RTAI headers
and libraries installed to the staging directory, so this patch adds
RTAI_INSTALL_STAGING = YES.
In addition, this patch fixes up the rtai-config script, but does that
manually, because the rtai-config script doesn't match the convention
that the common <pkg>_CONFIG_SCRIPTS logic is designed for. It also
specifies a special directory for the RTAI headers, so that they don't
get mixed up with kernel headers.
Finally, it updates the RTAI download address to use the new correct
location.
[Thomas: fix commit log.]
Signed-off-by: Andrew Barnes <andy@outsideglobe.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 6251ccf032 ('python3: fix the
value of PYTHON3_PATH') tried to fix the value of PYTHON3_PATH, but
did it incorrectly: it changed PYTHON_VERSION_MAJOR to
PYTHON_VERSION3_MAJOR, while it should have been
PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: rework according to Arnout comments.]
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ported patch from Cédric Chépied:
http://patchwork.ozlabs.org/patch/306896/
[Thomas: added comment explaining why we don't use <pkg>_AUTORECONF,
and use a more conventional syntax for <pkg>_DEPENDENCIES and
<pkg>_CONF_OPT.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in comments "his own files" -> "its own files"]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently ships a very minimal build configuration file for exim,
which disables most optional features. This is not coherent with the runtime
configuration file, taken verbatim from the exim distribution, which enables
some of these features.
The visible symptom is an error during boot that prevents exim from starting:
Exim configuration error in line 541 of /etc/exim/configure:
router dnslookup: cannot find router driver "dnslookup"
In order to fix this problem, we change the way exim is configured at build
time. Instead of blindly copying a minimal Buildroot-provided configuration
file, we now copy the exim-provided one and then tweak it to change the needed
options. This actually makes the configuration closer to standard exim.
As the amount of tweaking is remarkable, we also define a few macros to make
it easier and more readable.
This new approach was suggested by Bernd Kuhls.
Reported-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is similar to 821a6d63. Libexosip2 defines symbol __arc__, which
gets in contradiction with same symbol defined by the GCC for the Synopsys
DesignWare ARC cores. Previous patch undefined __arc__ for libosip2 and
libexosip2, however linphone includes headers from libexosip2, which causes
build failure unless same patch is applied to it.
This patch fixes
http://autobuild.buildroot.net/results/0d2e19d40d6d0df4048e6ebae5f77022f89ca7cb/
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit slightly adjusts rsh-redone.mk to better match the usual
Buildroot conventions:
* Variables are named in upper-case, prefixed by the name of the
package.
* No re-use of one _CMDS definition in another, and instead usage of
a RSH_REDONE_MAKE_FLAGS variable to pass identical flags betwen
build and install steps.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While there is a rcp.c in the source tree, the Makefile does not have
a rule nor logic to build it, and it anyway doesn't build at all.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add dependency on linux-pam for rshd and rlogind, adjust
commit message.]
Signed-off-by Andreas Ehmanns <universeii@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
