That gcc series is old and is not used as the default version for
any of the architectures we support, so this commit gets rid of it.
[Thomas: move the Config.in.legacy option at the right location.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is support for -mcpu=leon3 from gcc 4.8.3. Use this for LEON systems
instead of the non-mainline targets sparcsfleon, sparchfleon, sparcsfleonv8, and
sparchfleonv8.
[Thomas: add Config.in.legacy handling for the removed options.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop PR60102 patch which is now upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the dev days. It is broken for uClibc/musl and
architectures not using mainline gcc, so it has only very limited
usefulness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we switched to a two stage gcc build process, the AVR32
toolchain stopped building. This is because with such an old gcc
version, we cannot use the all-target-libgcc and install-target-libgcc
targets.
Before the two stage gcc, libgcc was only built in gcc-intermediate,
which carried a similar logic. This commit basically restores in
gcc-initial the logic that used to be in gcc-intermediate, which
consists in using the all-target-libcc and install-target-libgcc
targets only for gcc versions others than the AVR32 one.
Using the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE option has a way of
distinguishing the old AVR32 compiler from the other gcc versions is a
bit ugly, but it's what was done in gcc-intermediate before. And since
the AVR32 support is due to go away at some point in the hopefully
near future, we don't care that much.
This will fix the build of the two AVR32 defconfig that have been
constantly failing since switching to the two stage gcc process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Symptoms usually seen are like that:
--->---
Error: operand out of range (128 is not between -128 and 127)
--->---
where range may differ.
Since compiler tries to use jump/branch instructions with the shortest encoding
of offset it's important to calculate required offset properly.
In case of miscalculation by compiler later assembler throws an error because of
inability to encode requested value.
Fixes are taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new patch to the ARC 2014.08 gcc specific version,
that redefines PTRDIFF_TYPE from "long int" to "int".
The change of SIZE_TYPE from "long unsigned int" to "unsigned int"
http://git.buildroot.net/buildroot/commit/?id=0f236c1fef669192c8f5cc8ef26e93da91438dc2
introduced a regression due to the existing PTRDIFF_TYPE.
Now to fix regression the patch converts PTRDIFF_TYPE to simple "int".
The fix is taken from current development branch of GCC for ARC and
will be a part of the next release of ARC tools, so at that point
patch should be dropped.
846e92167a
[Thomas: tweak commit log.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cleanup arch/cpu combination limits, we had super-wide depends and it
doesn't help readability, version bumps or testing.
Make the bool/depends/select order the same for all entries.
Drop redundant limitations, for example sparc* if sparc wasn't
supported in general.
Power8 requires at least gcc 4.9.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the kernel patch from:
http://patchwork.ozlabs.org/patch/384285/
There is no problem with latest gcc anymore.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This makes size_t to be "unsigned" ssize_t which makes happy compiler on data
type checks.
Fix is taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
249f040299
Fixes http://autobuild.buildroot.net/results/405/405da9a945511329929b18740b983c51b8dcc43e
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have switched to a two steps gcc build process that uses
only gcc-initial and gcc-final, we can get rid of the gcc-intermediate
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the internal toolchain backend does a three stage gcc
build, with the following sequence of builds:
- build gcc-initial
- configure libc, install headers and start files
- build gcc-intermediate
- build libc
- build gcc-final
However, it turns out that this is not necessary, and only a two stage
gcc build is needed. At some point, it was believed that a three stage
gcc build was needed for NPTL based toolchains with old gcc versions,
but even a gcc 4.4 build with a NPTL toolchain works fine.
So, this commit switches the internal toolchain backend to use a two
stage gcc build: just gcc-initial and gcc-final. It does so by:
* Removing the custom dependency of all C libraries build step to
host-gcc-intermediate. Now the C library packages simply have to
depend on host-gcc-initial as a normal dependency (which they
already do), and that's it.
* Build and install both gcc *and* libgcc in
host-gcc-initial. Previously, only gcc was built and installed in
host-gcc-initial. libgcc was only done in host-gcc-intermediate,
but now we need libgcc to build the C library.
* Pass appropriate environment variables to get SSP (Stack Smashing
Protection) to work properly:
- Tell the compiler that the libc will provide the SSP support, by
passing gcc_cv_libc_provides_ssp=yes. In Buildroot, we have
chosen to use the SSP support from the C library instead of the
SSP support from the compiler (this is not changed by this patch
series, it was already the case).
- Tell glibc to *not* build its own programs with SSP support. The
issue is that if glibc detects that the compiler supports
-fstack-protector, then glibc uses it to build a few things with
SSP. However, at this point, the support is not complete (we
only have host-gcc-initial, and the C library is not completely
built). So, we pass libc_cv_ssp=no to tell the C library to not
use SSP support itself. Note that this is not a big loss: only a
few parts of the C library were built with -fstack-protector,
not the entire library.
* A special change is needed for ARC, because its libgcc depends on
the C library, which breaks building libgcc in
host-gcc-initial. This looks like a bug in the ARC compiler, as it
does not obey the inhibit_libc variable which tells the compiler
build process to *not* enable things that depend on the C
library. So for now, in host-gcc-initial, we simply disable the
build of libgmon.a for ARC. It's going to be built as part of
host-gcc-final, so the final compiler will have gmon support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now when new shiny tools are released by Synopsys we're ready for version
update in Buildroot.
Important change in this release is switching to combined "binutils-gdb" repo
in accordance to upstream move.
Following patch now is a part of the most recent relese:
e6ab8cac62
So dropping it.
package/binutils/arc-4.8-R3/0001-arc-Honor-DESTDIR-in-custom-Makefile.patch
Since arc-2014.08 tools are still based on GCC 4.8 following patch is still
relevant so moving to the new folder to matxh ARC gcc bump.
package/gcc/arc-4.8-R3/100-libstdcxx-uclibc-c99.patch ->
package/gcc/arc-2014.08/100-libstdcxx-uclibc-c99.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable shared build for host-gcc-final when building for static targets.
We really want static or shared, there's no such thing as "preferring static"
since we can't choose with any degree of granularity for which packages.
And it confuses linking scripts having both available at the same time. Fixes:
http://autobuild.buildroot.net/results/c54/c54bdf88eff6d60c7001cb0e2cb6792cc75178db/
[Thomas: slightly amend the commit to factorize the installation of
static libraries.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Exclude gcc 4.9.x for PowerPC SPE toolchains because of an ICE
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60102
There's a patch available but it's somewhat intrusive with PPC in
general and hasn't been well tested yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the switch to 4.8.x as default, the qemu-sparc target is broken.
For a gcc bug report see here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60624
Switch back to gcc 4.7.x as default for sparc.
Disable 4.8/4.9 as suggested by Thomas Petazzoni.
I even disabled gcc snapshot, it works right now, because
it is an old 4.8.0 snapshot by default, but as soon as this is updated
sparc build will break.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gcc graphite optimisations such as loop-interchange, blocking
and loop-flattening, also known as graphite are an optional feature of
gcc that is very well supported since about gcc version 4.5.
This patch adds support for graphite for the toolchain as an optional
flag for versions 4.8 onwards as an optional flag, that is disabled by
default.
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.
See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update 900-musl-support.patch with upstreamed chunks.
Now upstreamed hence dropped:
840-PR57717.patch (in another way).
842-gcc-4.8.2-Fix-PR-target-58854.patch
843-gcc-4.8.2-Fix-PR-target-58595.patch
850-xtensa-libgcc-linker-script.patch
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A build issue affects libsanitizer on musl toolchains, even with
previous versions of gcc such as 4.8.x, so we disable building
libsanitizer when working with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For the moment, the musl support is not in mainline gcc, so it
requires a few patches. We have integrated those patches only for gcc
4.7 and gcc 4.8 at the moment, so only allow those gcc versions when
the musl library is selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc support was added in version 4.6:
http://gcc.gnu.org/gcc-4.6/changes.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to gcc 4.9.x for microblaze since it's a better target than
4.8.x, and also add a build patch that fixes (e)glibc build issues.
Hence disable 4.8.x for microblaze.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow the 'else' part got dropped from commit 3f82e9dbcd (use default gcc
4.8.2 for microblaze), breaking download for "normal" architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
