And also use the .tar.bz2 tarball to save disk space and bandwidth.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Valgrind detects a 32-bit MIPS architecture, it forcibly adds
-march=mips32 to CFLAGS; when it detects a 64-bit MIPS architecture, it
forcibly adds -march=mips64. This causes Valgrind to be built always for
the first ISA revision level (R1), even when the user has configured
Buildroot for the second ISA revision level (R2).
Since R2 is backwards compatible with R1, you can run a Valgrind built
for R1 in an R2 core. This is why nobody noticed about this problem, or
at least nobody complained.
But, since (I hope) we will support R6 in Buildroot in the near future,
this problem will become very important because R6 is not backwards
compatible with R1 or R2, so building Valgrind for R1 when your target
is R6 will result in a non-working Valgrind.
Override the CFLAGS variable (which Valgrind appends to its CFLAGS) and
pass the right -march option, so they take precedence over Valgrind's
wrongfully detected value.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default is $PREFIX/libexec which ends up in an ugly and non-standard
/libexec dir in the target.
Move it to $PREFIX/lib/dhcpcd which is far more nicer and suitable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Making the getty option a menuconfig instead of a simple config
automatically moves its dependees into a menu without the need to
manually declare such a menu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The systemd service file is taken from Fedora.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use 'depends on' for wayland to match X11 client]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the only client we can build is the X11 client.
FreeRDP now has support for building a wayland client.
However, that means we need to rethink the way we build FreeRDP, because
of some "inconsistencies" in its build system. This is because FreeRDP's
buildsystem does not have orthogonal options; some of the options can be
used for different components.
For example, the set of X11 libraries needed to build the server is a
superset of the X11 libraries needed to build the X11 client. So,
whenever the server is enabled, it means the X11 libraries required to
build the X11 client are available.
Now, if the user also wants to build the waland client (but not the X11
client), there is no way to tell FreeRDP not to build the X11 client,
because there is a single option, WITH_CLIENT, to drive whether any of
the clients is built. The decision is made on the availability of the
required libraries. And since the server is enabled, the X11 libs
required to build the X11 client are available. So, we end up with the
X11 client, even though it is not wanted.
And conversely with wayland...
So, we redesign the way we build FreeRDP. WE do not care what is
actually built; we just build whatever is buildable with the current
set of enabled libraries. But at install time (both in staging/ and
target/) we remove whatever the user does not want.
We also take the opportunity to rename the X11 client option, so it is
coherent with the soon-to-be-introduced wayland client.
Note: since FreeRDP has gained new dependencies, we can not just
introduce the legacy option as-is, otherwise we run the risk that it
selects the new option even though the new FreeRDP dependencies are not
enabled, spitting out the infamous 'unmet direct dependencies" kconfig
error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, we expected the user to select gstreamer-0.x on his own,
to enable gstreamer support in FreeRDP. This could have been a bit
confusing to the user, as he may have enabled gst-1.x but FreeRDP did
only support gst-0.x.
Also, gstreamer support needs xlib-libxrandr, which was missing in
FreeRDP's dependencies, so it was never enabled (AFAICS).
(Re-)introduce support for gstreamer-0.x and gstreamer-1.x, since both
are supported.
We're doing it in a choice, and select whichever version the user chooses,
rather than automatically detect it as previosuly done. We can select the
gstreamer packages, as their dependencies are anyway already covered by the
ones of FreeRDP.
This also now requires xlib-libxrandr, so hide the choice if X.org is
not enabled, still offer the option of not using gstreamer if it is.
[Peter: Hide option if gstreamer{,1} aren't enabled,
Default to gstreamer{,1} support enabled
GStreamer 0.10 support needs host-pkgconf and libxml2]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we've switched to using FreeRDP from master, we can build weston's
FreeRDP backend again.
Propagate the new dependencies of FreeRDP.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we're packaging FreeRDP from the stable-1.1 branch, which has
not evolved since march 2015 and hasn't seen any release (not even a
tag) since July 2013. It is by all purpose and means, dead.
Other packages that may use FreeRDP (like weston) are now migrating to,
or have already migrated to using the API from master, which has changed
a bit from what was available on the stable-1.1 branch. So, those
packages now FTBFS.
However, FreeRDP still has not done a release from their master branch;
the last tag dates back to September 2014 and there are 1850+ changes on
top of that tag.
So, switch to using the currently-latest commit from master.
This version can also use gstreamer-1.x (in addition to gst-0.x), which
needs quite some rework on how we handle the dependency on gstreamer.
Drop gstreamer support entirely, support for gst-0.x and gst-1.x will be
re-added in a followup patch.
Similarly, a wayland client can now be built, support for which will
be added in a subsequent path; it is currently forcibly disabled.
The way the libraries are built has changed: the previous single library
has been split in multiple libraries, each implementing parts of the RDP
protocol.
Slight rewording of the prompts:
- drop the 'install' for client and server.
- drop 'freerdp' from the client and server comment
The location of the server keys has changed, so copy them from the new
location.
Finally, drop patches 1 and 3, applied upstrem; rename remaining
patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This has been the best practice since a long time, but it was not
clearly stated in the manual. Now it is mandatory, so mention it
explicitly.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
the perl dependency of cpan module is no longer generated by scancpan,
but added at the infrastructure level
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to bitbucket since it's not hosted at sourceforge any more (and
the official mutt source is ftp).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The imx-vpu package builds just fine without any special kernel header.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch the homepage to a non-ftp site.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, require threads support. cmake detects threads support correctly, but
libssh build system uses this information incorrectly.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 4.7.4 of tcpdump is not vulnerable to these issues according to:
https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-8767https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-8768https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-8769
The tcpdump commit log seems to indicate that these issues were fixes in a
different way in the following commits:
CVE-2014-8767: 4038f83ebf654804829b258dde5e0a508c1c2003
CVE-2014-8768: 9255c9b05b0a04b8d89739b3efcb9f393a617fe9
CVE-2014-8769: 9ed7ddb48fd557dc993e73f22a50dda6cedf4df7
Just drop these patches.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the usual rule consider full-blown packages superior to busybox,
hence build after it.
Also install cpio to /bin to override the busybox-provided one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
